Travel-ready and capable of taking a beating, the AR2466x4 Acrylic Panel from ClearSonic is a modular sound-isolation panel system with abrasion-resistant 3M 906 coating on both sides and a tall, 66" height. These panels are not only resistant to abrasions but also marring, scratching, and chemical attacks, and can be easily cleaned with standard ammonia-based cleaners and paper towels without worrying about fogging.

Ideal for shielding drums and cymbals on-the-go, these 96" wide, 4-section panels can handle most instruments mounted higher than 48", but can also be extended by 12 or 18" with the optional ARX Height Extenders. The AR2466x4 is normally used as a small stand-alone Gobo system and will provide about 140° of coverage around a 5-piece drum kit.

Durable Acrylic Sound Isolation Shield    Isolates Drums/Cymbals up to 66" Height    96" Width    Abrasion-Resistant 3M 906 Coating    Resists Marring/Scratching/Chemicals    4-Section Design, Expandable    Easy to Clean, No Fogging

Related Questions and Answers

Q: 1. It mentions full length hinges under Product Highlights. Does that mean it comes with a hinge? Bear in mind that I do understand this is one individual A5 panel.

A: I ordered two of these several months ago. Yes, each one comes with a hinge. So you'll end up having 1 left over in the end if you order multiple panels.

Q: 2. Is it really sure that this Kupo 3-Section Extension Pole is not compatible with the Kupo Slider Stand (Black, 45.3 ") + Kupo Baby Ball Head Adapter ..?

A: Hi Daniel, The Kupo Slider Stand top has a junior receiver i.e. female 1-1/8inch; The Extension Pole ends are threaded 3/8” - male on one end female on the other. The Kupo Baby Ball Head Adapter would allow the 3-Section Extension Pole to be connected to the Kupo Slider Stand. You would just need to remove the t-handle from the Ball Head Adapter so it drops into the stand top opening, and then screw on the Extension Pole https://www.bhphotovideo.com/c/product/1244788-REG/kupo_kg014212_baby_ball_head_adapter.html

Q: 3. does the gobopac fold up for easy storage?

A: Yes it does. The dimensions of the GoboPac wqhen folded and boxed are: Box Dimensions (LxWxH)68.0 x 27.0 x 4.0 .

Q: 4. Will this work with an NT1-A with the shock mount they come with?

A: Yes, the Rode NT1-A can be mounted within the Auray Foldable Desktop Isolation Filter.

Q: 5. What size is the screw for the foot?

A: The foot does not detach from the monopod.

Q: 6. I know it's designed to reduce the effects of a room's acoustics, but how well does it dampen your singing? Would it help to allow practicing in an apartment setting without disturbing neighbours?

A: According to the product description it will give you up to 35dB of sound reduction. Which would be considerable if your interest is in reducing the level of your voice so as not to disturb your neighbors. It seems to have cut outs for your shoulders so it looks like your entire head fits in the box. It says you can remove the sides as well which you would want to do for recording. It seems like it will do what you want.

Q: 7. how tall and how long is the ClearSonic A5 1-Section Acrylic PanelB&H # CLA51 MFR # A5-1?

A: Keep in mind this is only one panel... not an entire screen system. It's 60 tall.

Q: 8. Can you adjust the stand's height to raise and lower the foam?

A: Yes it is height adjustable 55 to 87" / Foam to Floor: 7.8 to 39.4" .

Q: 9. Will this work with the Procaster Mic?

A: No. This device is designed for a large diaphragm side address mic. The Procaster is an end address mic not meant for these types of filters.

Q: 10. I use a sennheiser mk416. Would that mount well in this? It's 15" w/ pop filter. I need about 6" distance. 10" for my head.

A: The total width of the ISOVOX 2 Midnight Portable Vocal Isolation Booth is 31.5", with just over a 1/4'' of that space taken up by the foam behind the microphone. Given the dimensions you have provided, this would leave about 2" or less between your mouth and the end of the Sennheiser MZW-415 - Foam Windscreen.