This 46.85 x 23.42 x 0.78", black Vicoustic Flat Panel PET is made from VicPET Wool - a nonwoven textile produced mainly from recycled plastic bottles. VicPET Wool is a low emitting material having earned the A+ French VOC label (ISO16000). It has also been classified as Class 1 according to OEKO-TEX 100 Standard, i.e. meeting the human - ecological requirements presently established for baby articles. In addition VicPET Wool is a fire rated product.

Flat Panels PET are designed to perform primarily in the medium and high frequencies - a great solution for any application for treating both ceilings and walls. Thanks to its green, recyclable, human-safe nature and acoustic properties Flat Panel PET can contribute to the development of sustainable projects and therefore can help you earning credits normally available in the Green Building Certification Schemes such as WELL, HQE, DGNB, CASBEE, BREEAM, etc.

Medium- and High-Frequency Treatment

Related Questions and Answers

Q: 1. Hi. We've got this cart and will be mounting a Samsung BE82T-H display to it. The Samsung manual says the mounting screws have to be 20-22mm. The only screws included with the cart that fit the display are the M8x25mm screws. Even with the screws through the mounting pieces, the length of the remaining screw is close to 23mm. We don't want to chance damaging the display, so I assume we'd then use washers. However, the included washers are too small for the M8 screws to fit through. Would it be acceptable to purchase washers that do fit at a hardware store? It seems to make sense, but I just want to make sure we're okay doing this. Thanks!

A: Yes you will be okay using different washers that will fit your screws.

Q: 2. how many inches can the brackets shift to the side when using a 400 x400 mount?

A: With the Sanus VLT5 mount, when mounting a TV with 400 x 400 pattern, there will be approximately 5 inches of lateral movement of the display in either direction.

Q: 3. Are the wheels able to come off so it sits flush on grass?

A: The Gabor Flat Panel TV Cart for 32-65" Displays (BH # GAFPC65) features four (4) removable casters.

Q: 4. How well does this support touch screen TVs? Does it wobble while the TV is being written on? Weigts at the base required?

A: The Gabor Flat Panel TV Cart for 55-85" Displays BH #GAFPC85 will not wobble within its payload restriction of 200 lbs. For a touchscreen monitor it would be strongly recommended to lock the casters and weight the base with sandbags.

Q: 5. if the height is raised to, say 6ft, is it measure from the floor to the middle of the TV?

A: The minimum and maximum height of the stand is measured from the floor to top of the mount.52.8 to 65" / 134 to 165 cm. The TV height varies depending on the TV

Q: 6. Does anyone know if Photogenic umbrellas fit into Elinchrom Light heads? Any help would be much appreciated. Thanks!

A: Photogenic were my favorite umbrellas and I used them for years with a variety of lighting equipment so yes they will work with Elinchrom heads.

Q: 7. Can this support a vertically mounted tv?

A: No, this is for horizontal mounting only.

Q: 8. is this mount compatible with Sony XBR65X800B?

A: Hi David! I used the mount for a Samsung TV. I went strictly by the size of TV more so than the particular brand. It worked great. The price was considerably lower than I found in my local stores. Hope this helps.

Q: 9. could a speakerbar be mounted? Extra shelf?

A: Gabor does not include any additional shelving as an accessory to this unit. You may, however, directly mount a soundbar to a TV using a mount or adapter.

Q: 10. What is the maximum TV weight this can handle?

A: The Gabor Flat Panel TV Cart for 55-85" Displays BH #GAFPC85 will accept: Load Capacity: 200 lb / 90.7 kg (Total) 25 lb / 11.3 kg (Shelf)