Bring flexible layouts and easy cooling to your next build with the LANCOOL 216 RGB Mid-Tower Case in black from Lian-Li. Supporting ATX, Micro-ATX and Mini-ITX motherboards, this case also fits E-ATX boards up to 11.02". Install up to six 2.5" and two 3.5" drives. Seven expansion slots accommodate various adapter cards, including GPUs up to 15.43"; vertical GPUs are supported via a riser cable, available separately. This mid-tower case also supports CPU coolers up to 7.11" and ATX PSUs up to 8.66".

Preinstalled with a 140mm PWM fan and two 160mm RGB fans, this case supports up to 10 cooling fans and features a SATA-powered fan hub. Or, install a liquid cooling setup thanks to a flexible case design and support for radiators up to 360mm at the top and front of the case. A removable top radiator bracket allows for easy access to components, while a dedicated cable management space helps keep your build looking organized. Keep internals on full display via a tempered glass side panel. A front I/O panel sports a combo audio jack and a USB-C and two USB-A 3.0/3.1 Gen 1 ports and can be positioned at the top or bottom side of the front panel.

E-ATX, ATX, Micro-ATX & Mini-ITX Support    Steel Frame with Tempered Glass Window    2 x 3.5" Drive Bays    6 x 2.5" Drive Bays    7 x Expansion Slots    2 x USB-A 3.0/3.1 Gen 1, 1 x USB-C    1 x 140mm PWM & 2 x 160mm RGB Fans    Support for Liquid Cooling Systems    Supports GPUs up to 15.43"    Supports CPU Coolers up to 7.11"

To ensure adequate airflow is provided to the system, the LANCOOL 216 RGB features mesh at the front and top of the case, as well as on the PSU shroud's side. The front mesh extends to the top for a continuous mesh panel.

Please note, the mesh panel beside the PSU shroud chamber is removable but is also an integral part of the support mechanism for the side tempered glass panel.

RGB Fans

Located in the chamber behind the motherboard, a SATA-powered fan hub supports up to four ARGB and PWM fans.

The modular motherboard I/O allows users to move the motherboard to a higher position more favorable for air-cooled systems or a lower position for liquid-cooled systems.

• Set higher for air cooling, the motherboard leaves room above the PSU shroud for wider fans
• Set lower, the motherboard leaves a 2.48" gap at the top to install radiator and fan combos, ideal for All-in-One coolers or custom setups

Front I/O ports include power and reset buttons, plus an audio jack, one USB-C port, and two USB-A 3.0/3.1 Gen 1 ports. These ports can be relocated to the lower left side of the front panel.

The LANCOOL 216 RGB supports ATX, Micro-ATX, and Mini-ITX motherboards, as well as E-ATX boards under 11.02" when the grommet bar is flipped 180°. Thanks to a symmetrical design, cable management in the 2nd chamber remains unaffected for easy building.

With enough room for graphics cards up to 15.43" in length and up to 7.09" in height in air cooling setups, the LANCOOL 216 RGB is compatible with large graphics cards, including NVIDIA 4000 series cards.

Preinstalled at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing radiators smaller than 360mm or air cooling options with footprints smaller than three 120mm fans.

The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and allowing for a cleaner overall look.

The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and liquid-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater balance between intake and exhaust for your system.

The PCIe expansion slot panel can be rotated to accommodate vertical GPUs via a riser cable, available separately.

Two drive bays provide space for two 2.5" SSDs and two 3.5" drives. Plus, mount up to four 2.5" SSDs via two additional mounts on the PSU shroud and two on the back of the motherboard tray.

Please note, the 2.5" drive mounts on the PSU shroud can be used to mount cooling fans instead.

The LANCOOL 216 RGB offers multiple options for easy cable management. Along the cable grommet bar, three large Velcro straps can hold two different sets of cables. Three small clips are located along the rear side panel, ideal for cleanly routing the 8-pin CPU cable, and two additional Velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.

Related Questions and Answers

Q: 1. can it accept a 3x120 (360) MM AIO cooler without 1 fan being blocked by something?

A: It seems like it should fit fine without blocking anything with proper wire management.

Q: 2. is there options for a fan hub?

A: Yes, you can install a fan hub inside the Lian Li LANCOOL II Mesh RGB Mid-Tower Case (Black) BH #LILAN2MRX.

Q: 3. Will this case hold a 280 mm radiator on front ? or on top? or in both?

A: The Lian Li LANCOOL II Mesh Performance Mid-Tower Case (Black) BH #LILAN2MPX can hold the following radiator configuration: Front (multi-way fan/radiator bracket): 1 x 360/280/240mm Top: 1 x 240mm (aligned to the left)

Q: 4. will it fit rtx 3080/3090 ?

A: Yes, this will fit both the 3080 and 3090.

Q: 5. Does the non rgb version comes with a fan hub and switch to control fan speeds?

A: The Lian Li LANCOOL III Tower PC Case does not include a fan controller.

Q: 6. Does it support 360mm aio cooler at the top and does it support e-atx?

A: Yes the case does supports 360mm AIO cooler top.

Q: 7. Is it possible to mount the PSU in the left side of the case below the motherboard? Is there a rear panel that allows this configuration so the power cable can run out the back? Please note I'm asking about the left side (with the glass panel. NOT the right side where the drives are installed).

A: No, it is not possible to install the PSU on the left side of the Lian Li O11 Dynamic XL Full Tower Case (White) BH #LIO11DXLW.

Q: 8. Any fans included?

A: No, the O11 Vision ATX Mid-Tower Computer Case does not come with any case fans.

Q: 9. What does the case weigh? Specs for package weight say 28.6 lbs, or is that just the case itself?

A: The Lian Li LANCOOL 216 Mid-Tower Case (Black), B&H # LILANCL216X, weighs 23.1 lbs (10.5kg).

Q: 10. How is the (Black, Type-C) BH #LILAN2MPX50 difference from (Black) BH #LILAN2MPX?

A: The LILAN2MPX50 has USB-C ports. The other does not.