Portabrace Ultralight Cinema Case For Red Epic Camera Rigs
- Product Code: ga119976
-
Transport and protect your RED EPIC cinema camera with its lens installed in this Ultralight Cinema Case from PortaBrace. Constructed from durable 1000-denier Cordura nylon over a 1" thick foam frame, the case features a quick-zip lid for fast access to your camera and a 9" interior height which accommodates a variety of rig configurations. It is designed to accommodate an EPIC camera with its lens installed, even if it has a longer lens, with a maximum total rig length of 22".
A waterproof "Slip-Not" layer on the bottom will protect your gear from water and dampness when it is sitting on the ground. Additional protection is provided by a soft interior lining and a cinch strap to secure the camera body. Touch-fastening and zippered pockets can be used to hold cables, microphones, media, or other accessories. Carry the case by the comfortable top handle or with the included Super Strap shoulder strap.
Holds RED EPIC Camera with Long Lens Quick-Access Dual-Zipper Opening Holds Cine Camera up to 9" High Two Exterior Side Accessory Pockets Waterproof Slip-Not Bottom Layer Padded Super Strap Shoulder Strap Made in the USA
Key Specs | |
---|---|
Color | Black |
Carry/Transport Options | Shoulder Strap, Handle |
Type of Closure | Zipper |
Water Resistance | Water Resistant |
Dimensions | Exterior 26 x 12 x 12" / 66 x 30.5 x 30.5 cm Interior 22 x 9 x 7" / 55.9 x 22.9 x 17.8 cm |
Weight | 5.05 lb / 2.29 kg |
Parameters | |
Camera Compatibility | RED EPIC |
Carry/Transport Options | Shoulder Strap, Handle |
Type of Closure | Zipper |
Features | |
Bottle Pocket | No |
RFID-Blocking Pockets | No |
Stand/Tripod Holder | No |
Security Lock | No |
General | |
Water Resistance | Water Resistant |
Padded Interior | Yes, 1" / 2.54 cm Thick |
Dimensions | Exterior 26 x 12 x 12" / 66 x 30.5 x 30.5 cm Interior 22 x 9 x 7" / 55.9 x 22.9 x 17.8 cm |
Weight | 5.05 lb / 2.29 kg |
RED EPIC cinema camera with long lens installed or similar camcorder measuring up to 9" in height, 7" in width, and 22" in length
Quick-zip lid for fast access to your camera
Abrasion-resistant 1000D Cordura nylon with waterproof bottom layer
Thick padding and soft loop fabric
Soft top handle and removable shoulder strap
Large zippered back pocket, two side pockets, and front pocket with hook-and-loop closure
Related Questions and Answers
Q: 1. Will it fit a varicam lt?
A: No this will not fit the Varicam-LT
Q: 2. Will this accommodate the Ursa EVF and 2 batteries? Detached is ok. Thanks -
A: Yes, PortaBrace Ultra-Light Camera Case for Blackmagic URSA Mini (LONG) does clear the top of the camera with handle attached. Also there is extra space that could be used for lenses or batteries. See this image https://bit.ly/3p2Wmbk
Q: 3. What is the actual weight of this item? The weight does not change when selecting different options.
A: The weight of the PortaBrace Ultralight Tall Camera Case for Shoot-Ready Cinema Rigs (11.25" Height, Wheeled) is 6.5 lb (2.04 kg).
Q: 4. Is it possible to use fx9 with this bag?
A: This case has interior dimensions of 22 inches x 7 inches x 9.5 inches. The body of the FX9 is 5.75 x 5.61 x 9.02", once broken down it will fit in this case with ample room.
Q: 5. How does this mount to the back of the camera? Is it included with what is shown in the pictures?
A: No. You would have to purchase a secondary piece... Either the Quickback or Fixed Back. The Quick Back would allow you to take the whole piece off of the camera with ease.
Q: 6. Will this work with the RED V Raptor?
A: No, the RED V-Raptor does not have a 3.5mm audio input. The Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2 will not work on that camera.
Q: 7. Will the dimensions of this bag fit in airplane overhead bins?
A: Airline carry-on dimensions will depend on the flight. Generally overhead carry-on dimensions are a max 22" x 14" x 9" (HxWxD). The PortaBrace Ultralight Cordura Camera Case for Canon EOS C500 Mark II Camera Rig dimensions are 21.00" x 13.25" x 13.00" and unfortunately one of the dimensions exceeds what is needed.
Q: 8. CAN THIS WORK ON THE DSMC SCARLET ?
A: Yes, but you need a back to mount the plate to the camera such as the wooden camera quick back. Also, turn your caps lock off.
Q: 9. can this be brought on as a carry on for traveling?
A: This has exterior dimensions of 21.00 x 13.25 x 13.00" . Carry on size tends to be 22 x 14 x 9 so this bag is just a bit too large in most cases.
Q: 10. Has anyone used this with the Sony F5 camera fully built? Not the FS5 but the larger F5. Thanks.
A: This case has interior dimensions of 17.00" L x 11.5" W x 11.25" H. It is possible it will work with your fully built camera rig, but you will need to measure the dimensions of that rig to see if hey correspond with the dimensions of this case.
Top Bestselling Products
Portabrace Ultralight Camera Backpack For Red Epic
$1,540.20 $2,094.67
Vocas Red Epic 15mm Rod Support
$960.81 $1,479.65
Gigapan Epic Pro V Robotic Camera Mount
$3,767.85 $5,161.95
Steadicam Zephyr Power Cable For Red Epic & Scarlet
$1,035.00 $1,242.00
Portabrace Wheeled Ultralight Camera Backpack For Red Epic
$1,768.80 $2,334.82
Wooden Camera Pl Mount For Red Epic/scarlet
$1,197.00 $1,903.23
Teradek Rt Mk3.1 Red Epic Dsmc Camera Control Cable (24")
$299.85 $392.80
Cinegears Remote Trigger For Red Epic Camera
$825.00 $1,212.75
Portabrace Carry Case For Red Epic Camera
$882.96 $1,244.97
Freefly D-tap Power Cable For Red Epic (9.8")
$897.00 $1,390.35
Lilliput 15.6" 12g-sdi/hdmi Broadcast Studio Monitor With Carry Case (v-mount)
$5,577.00 $6,859.71
Products You May Like
Tiffen Glimmerglass Filter (62mm, Grade 3)
$158.85 $216.04
Chimera Panel Frame (48 X 72")
$861.00 $1,145.13
Phottix G-capsule Hexadecagon Standard Softbox (26")
$569.85 $883.27
Sensei Pro 55-58mm Aluminum Step-up Ring
$29.85 $39.40
Apple 16" Macbook Pro (m3 Max, Space Black)
$11,397.00 $18,007.26
Auray Double Microphone Clip (black)
$8.97 $11.48
Tiffen 4 X 6" 1/8 Coral Soft-edge Graduated Filter (horizontal Orientation)
$1,199.85 $1,871.77
Tiffen 6.6 X 6.6" Black Pro-mist 1/16 Filter
$1,947.00 $2,608.98
Global Truss 6-way Corner Block For 20.5" Plated Truss
$5,502.00 $7,702.80
Nanuk Lid Organizer For 938 Case
$509.85 $723.99
Arri Lmb 6x6 Side Flags
$3,060.00 $4,161.60
Tiffen Soft-edge Graduated Nd Filter (3 X 3", 3-stop)
$470.85 $659.19
Kaiser 59mm Push-on Lens Cap
$48.00 $61.44
Qsc Gx3 300-watt 8-ohm Power Amplifier
$1,499.97 $2,054.96