Transport and protect your RED RAVEN cinema camera in shoot-ready configuration with this Ultralight Camera Case from PortaBrace. Constructed from durable 1000-denier Cordura nylon over a 1" thick foam frame, the case features a quick-zip lid for fast access to your camera and an 11.25" interior height which accommodates a variety of rig configurations. It is designed to hold a Red Raven cinema camera with its lens installed, even with a longer lens, accommodating a maximum total rig length of 17".

A waterproof "Slip-Not" layer on the bottom protects your gear from water and dampness when the bag is sitting on the ground. A soft interior lining provides additional protection and a cinch strap secures the camera body. Touch-fastening and zippered pockets hold cables, microphones, media, or other accessories. Carry the case by the comfortable top handle or with the included Super Strap anti-slip shoulder strap.

Holds RED RAVEN Camera Rig    Quick-Access Dual-Zipper Opening    Holds Cine Camera up to 11.25" Tall    Four Exterior Accessory Pockets    Waterproof Slip-Not Bottom Layer    Padded Super Strap Shoulder Strap    Made in the USA

RED RAVEN cinema cameras with accessories installed or a similar camcorder measuring up to 11.25" in height, 11.5" in width, and 17" in length

Quick-zip lid for fast access to your camera

Abrasion-resistant 1000D Cordura nylon with waterproof bottom layer

Thick padding and soft loop fabric

Soft top handle and removable shoulder strap

Four exterior pockets

Related Questions and Answers

Q: 1. What is the actual weight of this item? The weight does not change when selecting different options.

A: The weight of the PortaBrace Ultralight Tall Camera Case for Shoot-Ready Cinema Rigs (11.25" Height, Wheeled) is 6.5 lb (2.04 kg).

Q: 2. Can I use this bag as a carry on for flights?

A: Unfortunately it will not. This case has exterior dimensions of 21.3 x 15.0 x 16.0" and carry-on size is usually 22 x 14 x 9. This case will be too large to carry on a flight.

Q: 3. Will the dimensions of this bag fit in airplane overhead bins?

A: Airline carry-on dimensions will depend on the flight. Generally overhead carry-on dimensions are a max 22" x 14" x 9" (HxWxD). The PortaBrace Ultralight Cordura Camera Case for Canon EOS C500 Mark II Camera Rig dimensions are 21.00" x 13.25" x 13.00" and unfortunately one of the dimensions exceeds what is needed.

Q: 4. Can I order just the ProArms?

A: My understanding is they are available. Please call us so that we can find out if it possible to order them through B&H. B&H 800.606.6969 or 212.444.6615.

Q: 5. Will this work with the DJI ronin 2?

A: Yes, if you keep the overall load of the Ronin 2 with camera at or below 30 pounds. The Ronin 2, B&H # DJRONIN2, weighs about 12 pounds and has a 30 pound load capacity. If the total of the Ronin 2 and camera goes over the 30 pound mark, you will need to look in to the Pro Arm Model, B&H # RERIGGSA, which has a 40 pound load capacity.https://bhpho.to/2CSe72b

Q: 6. If you buy the standard now can you always add the extended arm?

A: Yes, you can always upgrade to the ProArm Kit at a later date. I would suggest starting with the ProArm Kit.

Q: 7. Is this too big a case for a Canon G7X Mark II?

A: It's fine, but you'll only have room for an extra memory card, battery and lens cloth. I actually added a lensmate to the front of the lens so I could use filters. The extra room I needed to accommodate the lensmate and filter required me to use another case.

Q: 8. Is it possible to use fx9 with this bag?

A: This case has interior dimensions of 22 inches x 7 inches x 9.5 inches. The body of the FX9 is 5.75 x 5.61 x 9.02", once broken down it will fit in this case with ample room.

Q: 9. How many film canisters can this hold together with a Kodak M35?

A: The Case Logic Advanced Point-and-Shoot Camera Case (Black) at the most can hold 1-2 rolls with the M35 camera. And it will be tight.

Q: 10. Can the pins that adjust the back support be replaced? One of the back pins appears to have fallen off and I can no longer adjust the back support

A: BH #RERRHRK is the Ready Rig Hardware Replacement Kit.