At the center of Gossen's certification light metering system is the MAVOMASTER, a compact, all-in-one control and display unit that generates and stores lighting measurements when used with any MAVOPROBE. The MAVOMASTER interprets MAVOPROBE readings in both absolute and relative values, calculates derivative values, and charts these values over time to provide the user with an in-depth understanding of any lighting environment.

The unit takes one AA battery and has 8GB of internal storage that functions as an external drive when connected to a PC via USB and used with MAVOSOFT software for Microsoft Windows. Only one MAVOPROBE can be connected to a MAVOMASTER at a time.

MAVOMASTER Control and Display Unit    MAVOPROBE LUX 5032 B Illuminance Probe    For Use in Certification and Inspection    Relative and Integral Measurement    Range: 0.01-19,900 fc / 0.1-199,900 lux    Color Correction for Human Eye Spectrum    Cosine Correction for Incident Angle    Logs Data with Adjustable Time Interval    MAVOMASTER 8GB Internal Storage

Related Questions and Answers

Q: 1. Does this light meter have a shutter speed value of 1/200 and 1/160 that you can select in the shutter priority? I shoot with a Canon camera and wanted to make sure these values are used in the light meter settings.

A: The Gossen Sixtomat F2 Exposure Meter has shutter values of 1/8000 s to 60 min. It includes 1/200 and 1/160 among them.

Q: 2. Is there a way to mount this to a stand? Some kind of clamp or holder?

A: https://www.bhphotovideo.com/c/product/504596-REG/TecNec_VEL90209_VEL_90209_4_Sets_of.html https://www.bhphotovideo.com/c/product/1486335-REG/lastybands_lb506_5_elastic_strap_with.html https://www.bhphotovideo.com/c/product/733092-REG/Pearstone_rc1002_05_b_1_x_2_Rapid.html

Q: 3. "Can it toggle back and forth between a shutter speed/aperture reading (let’s say, f/8 @ 1/60) and then to its EV equivalent (say, EV 12) (and then back to f/8 @ 1/60) or does changing the mode erase the existing reading?"

A: Yes you can

Q: 4. Can this light meter fire and measure the shutter and f stop of a studio flash without it being attached to the studio flash itself?

A: Flash readings can be taken with or without synchronizing cable. When used in conjunction with a synchronizing cable the flash is triggered by pressing the M button - the flash is automatically triggered and measured. When used without a cable, the meter will wait up to 45 seconds for you to trigger the flash yourself.

Q: 5. Does this adaptor also convert the voltage to 1.35v?

A: The Gossen Battery Adapter Set does not convert voltage. It does list that it uses 2 batteries at 1.35 volts.

Q: 6. My name is Bernd Ernst.Yesterday B&H send me the Gossen Sixtomat F2.The service and the Product I am an Happy camper,good joband an job well done.This product I recommend to an friend.

A: We are very happy that you are satisfied with your experience with B&H. Thank you very much for your feedback as our customers are the most important thing to us.

Q: 7. Does Gossen Digisix II.fit on an accessory shoe; like on an old Nikon S2?

A: The Gossen Digisix 2 Ambient Light Meter has a 1/4" screw opening in the back. You can use an adapter like this to place it on the shoe of a camera. https://www.bhphotovideo.com/c/product/860269-REG/Revo_sa_cs_14m_Hot_Shoe_to_1_4.html

Q: 8. what material is this meter made of?

A: The body of the Gossen Digisix 2 Ambient Light Meter is made of a hard industrial plastic.

Q: 9. Where is this made?

A: It is made in the USA.

Q: 10. How does the Sixtomat F2 perform in low light environments?

A: It will read any ambient lighting condition and give you a time exposure reading