The Molex to Two SATA Right Angle Cable from iStarUSA features a single Molex connector that breaks out into 2 SATA connectors. The 90° right angle design allows for seamless connection even in tight-space applications.

90° Right Angle Design    Molex to Two SATA Connectors    RoHS Compliant

Related Questions and Answers

Q: 1. Can you get this in different colors?

A: Apparently only black right now.

Q: 2. Is this an appropriate cable to power a Sony A73 from a core nano micro battery?

A: You can power the Sony a7 III from a Core Nano Micro battery using the Kondor Blue 12" USB-C to USB-A Right Angle Cable (Blue). A dummy battery solution like the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable, B&H # KODTSA7SDB, could be a more ideal solution for this use, however.

Q: 3. Is this working for MixPre 10 II as well?

A: Yes, the CAMVATE D-Tap to 4-Pin Hirose Cable is compatible for use with the Sound Devices MixPre-10 II Multitrack Field Recorder.

Q: 4. Will this work with a different brand of TC Generator like Ultrasync One?

A: yes no problem it will work with any brand equipment that requires that specific connection.

Q: 5. Does this cable work from a camera to a microphone or sennheiser wireless audio receiver?

A: The Pearstone Mini TRRS to TRRS Cable (Right Angle, 1.5') uses Tip-Ring-Ring-Sleeve wiring. Most mirrorless, DSLR, and camcorders that have a 3.5mm mic input use Tip-Ring-Sleeve wiring (TRS). For Sennheiser wireless receivers, this is the output cable to use, which has a locking connector on the receiver end: https://bhpho.to/406BEKx.

Q: 6. Would this cable work on a panasonic HPX 170?

A: The Tentacle Sync Tentacle to BNC Cable (Right Angle, 16") can be used with the panasonic HPX 170, which features a BNC output connector.

Q: 7. Can it connect hdmi to ethernet

A: No. It connects HDMI to HDMI, like an extension cord.

Q: 8. compatvel com a Blackmagic Pocket 4k?

A: The Tentacle Sync C08 Tentacle to BNC Cable is a bi-directional cable used to feed or accept a timecode signal between a Tentacle Sync timecode generator and a device with a BNC TC in/out port. The Blackmagic Pocket Cinema Camera 4K has a 3.5mm timecode input. The C08 cable will only work if you are using a timecode generator that has a BNC connector.

Q: 9. What's the impedance of this cable?

A: This cable has 75 Ohm Impedance.

Q: 10. What is the bandwidth? 18GBps or less? Does it support 4K 60Hz 4:4:4?

A: The Kramer High-Speed HDMI Extension Cable with Ethernet (1') BH #KRADCHMHFPIC supports 18GBps. There is no published documentation regarding 60 Hz 4:4:4. HDMI Support: Signals up to 4K, HDMI Ethernet Channel, 3D, x.v.Color™, Deep Color, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC, 12-bit ProRes RAW.