The Blue 5.25 to 3.5" SAS/SATA 6.0 Gb/s Hot-Swap Cage from iStarUSA creates additional space for hard drives with hot-swap capability. This series supports RAID 1/0/1+0/5 configuration for high performance or redundancy data application. A high density multi-disk storage backplane allows multiple 3x3.5"(88.9mm) SAS/SATA hard drives to be mounted into 2 standards 5.25"(133.35mm). All-aluminum construction provides superior heat dissipation required for high-performance SAS/SATA drives, while a 2.75"(70mm) fan provides excellent front to back vent airflow.

RAID 0/1/5 Configuration    Supports and SATA Interfaces    Aluminum Design    Power, Fan & Temperature LED indicators    Super Air Ventilation    Exceeds Rotational Vibration    Patent Balance Handle    Stylish Aluminum Color Handle    Heat-Sink Body

Stylish aluminum color handle and heat-sink body

Plug-and-play hot-swappable

All-aluminum design with conductive dissipation grooves

LED indicators for P/S, HDD access, fan sensor and buzzer

Power control switch

3-stage temperature alarm settings and reset switch for buzzer alarm

Super air ventilation and heat sink with a 2.75"(70mm)

SATA 15-pin and 4-pin power connectors

Exceeds rotational vibration requirements specified for today's high-rpm drives

Patent balance handle - No skew in/out problem and avoid abrasion during connection

Precise connection between the hard drive and the cage

Related Questions and Answers

Q: 1. Is it compatible with the Synology new DS 723+ NAS?

A: For the most current information on compatibility with Synology NAS units, please refer to the Synology compatibility portal here: https://www.synology.com/en-us/compatibility

Q: 2. Does this fit on the Red V Raptor camera?

A: Yes, the bebob Vmicro Hot-Swap Plate will fit the Red V Raptor. It works with the V-mount plate and enables simultaneous mounting of two Vmicro batteries.

Q: 3. Is this drive Cmr?

A: Yes, According to Seagate's website this is a CMR drive!

Q: 4. is it covered by international warranty?

A: You will need to check with Seagate about their coverages in your specific part of the world. There are embargoes and restrictions on where they can service.

Q: 5. Is it compatible with m-logic sata LTO9?

A: You could use a sff-8644 to sff-8088 external cable to connect to them.

Q: 6. Does this harddrive go into an external unit or within a computer? New at this

A: The Seagate 20TB Exos X20 7200 rpm SAS III 12 Gb/s 3.5" Internal HDD can be installed into any computer, server, or enclosure that has a 3.5" SAS III hard drive slot. Both SAS and SATA versions are available on this listing - please be advised that SAS is not the same as SATA, and SAS drives will not be compatible with the SATA III drive slots found in most consumer devices. For those applications, the SATA III option should be selected.

Q: 7. Hi, can I use this adapter with With a Fusion DX800 RAID discs from Sonnet?

A: Sonnet DX800RAID drive uses two mini-SAS connectors. BH #ATLSH3128D00 also has 2 mini-SAS output connectors. Both products are compatible with a Thunderbolt 3 Mac system.

Q: 8. Can you charge both batteries on plate by using 1-port d-tap charger plug into the plate?

A: Many thanks for your interest! Sorry, but this is not possible - the adapter doesn't have any charging inputs...

Q: 9. Is this unit compatible with any other third party B mount batteries?

A: Yes, The SWIT KA-B30B B-Mount to B-Mount Hotswap Plate would support 3rd party B-Mount batteries.

Q: 10. What types of connections? USB 3, Thunderbolt, eSata, Firewire?

A: The iStarUSA BPU-350SATA 3 x 5.25" to 5 x 3.5" Bay SAS/SATA 6.0 Gb/s Hot-Swap Cage (Red) MFR #BPU-350SATA-RED • BH #ISP350SATARD is meant to be used internally with high end workstations or servers and it only has 5 x SATA ports. It does not have USB or Thunderbolt.