For those who are looking to create a discrete in-wall sound system for music or movies, the ISW-6 In-Wall Subwoofer from Bowers & Wilkins is essential in filling out the low end. Even with its thin profile, the ISW-6 offers twin racetrack drivers in a force-cancelling configuration, pumping out 250W of power with minimal sound leakage and a clean sound. Installation during construction is made to be easy, with the ability to mount horizontally or vertically, but an optional retrofit grille kit can be obtained to put them in your existing walls.

250W of Power at 8 Ohms    Works with B&W CI300 & CI600 Speakers    Twin Racetrack Drivers    Force-Cancelling Configuration    Mount Horizontally or Vertically    Fits into 2 x 4" Stud Wall    Closed-Box Design

• Works with Bowers & Wilkins CI300 & CI600 speakers
• Closed-box design
• Thin profile lets them fit into a 2 x 4" stud wall

Related Questions and Answers

Q: 1. Can this unit be used with a marantz sr5012?

A: Yes. This SONY subwoofer may be used withe Marantz sr5012 AV receiver.

Q: 2. I have a sony home theater system DAV-DZ290K. Can i connect this subwoofer to the system

A: Yes, it COULD be connected via the audio out connections, though not recommended, as these are full-frequency output . Recommend to instead use a PASSIVE sub-woofer. The Sony DAV-DZ290K has a subwoofer out to a PASSIVE (not ACTIVE) connection.

Q: 3. does this model version have flat feet?

A: The bottom of the legs are flat.

Q: 4. The dimensions are stated as 11.6 X 13.6 X 15.7. Which dimension is the width?

A: The Sony SA-CS9 10" 115W Subwoofer BH #SOSACS9 dimensions: (11 5/8 × 13 5/8 × 15 3/4 in.) (w/h/d)

Q: 5. Can I just connect to my laptop using the phono to audio cable and will get a quality sound?

A: Not at all. You would need to connect to your computer's dedicated subwoofer output if it has one.

Q: 6. This subwoofer work with yamaha reciever?

A: Yes , it has high level inputs. Which are pass-through for speakers also. The manual is available at the sony website ..

Q: 7. I am overseas and our power is 220v the unit says it can handle that. Is there a converter on the power cord or is it internal?

A: The Audioengine S8 8" 250W Subwoofer (Black), B&H # AUAS8B, is able to accept AC input power of anywhere from 100 to 240V. A plug adapter is necessary to use this subwoofer internationally, but an additional transformer will not be needed.

Q: 8. If using the speaker wire inputs, does the unit need to be plugged into power? Also, will this work properly with an 8ohm Sony receiver?

A: Jason, the unit must be plugged in to work. Also, the unit will work with a 8ohm receiver.

Q: 9. Does it include a UK 3-pin plug?

A: No. The Audioengine S6 6" 210W Subwoofer includes a North American AC Power Cord.

Q: 10. Can I just connect to my laptop using the phono to audio cable

A: Not at all. You would need to connect to your computer's dedicated subwoofer output if it has one.