This 32.8' Gossen Extension Cord features both male and female 5-pin Binder 711 series connectors to allow users to take MAVOPROBE measurements at an expanded maximum distance from the MAVOMASTER.

For MAVOPROBE and MAVOMASTER    Male and Female 711 Series Connectors    Expands Effective Use Distance

Related Questions and Answers

Q: 1. what material is this meter made of?

A: The body of the Gossen Digisix 2 Ambient Light Meter is made of a hard industrial plastic.

Q: 2. Can you tell me the difference between the Sixtomat F2 and the Digipro F2?

A: The, Sixtomat F2 is 118 mm x 65 mm x 19 mm / 4.65 x 2.56 x 0.75 inch and the Gossen DigiPro F2 Flash and Ambient Light Meter v2 is 150 mm x 65 mm x 19 mm 5.91 x 2.56 x 0.75 inch. The Sixtomat F2 is 95 g / 0.21 lbs without battery and the Digipro is 100 g / 0.22 lbs without battery. Other wise the are about the same.

Q: 3. Will this meter display percent of flash contribution?

A: Unfortunately, this meter would not display a percentage of flash.

Q: 4. My name is Bernd Ernst.Yesterday B&H send me the Gossen Sixtomat F2.The service and the Product I am an Happy camper,good joband an job well done.This product I recommend to an friend.

A: We are very happy that you are satisfied with your experience with B&H. Thank you very much for your feedback as our customers are the most important thing to us.

Q: 5. Since there's no power button, and the meter is permanently draining the battery, is it a good idea or a bad idea to continually remove the battery when the meter is not in use?

A: The battery inside the Gossen Digisix 2 Ambient Light Meter uses very little power, so it is not imperative to remove the battery from the meter. However, if it eases your concern, if you will not be using the meter for more 3-6 months or longer and you have a safe space to store the battery, then you may remove the battery for your convenience.

Q: 6. Does this meter have a screen backlight so I can read it in dim lighting?

A: Yes, the screen is lit. You can adjust the brightness of it.

Q: 7. "Can it toggle back and forth between a shutter speed/aperture reading (let’s say, f/8 @ 1/60) and then to its EV equivalent (say, EV 12) (and then back to f/8 @ 1/60) or does changing the mode erase the existing reading?"

A: Yes you can

Q: 8. Can Gossen MAVOSPEC measures flash light?

A: Hi,The Mavospec cannot measure flash light in a proper way, due to the long integration time. However it's capable of providing spectral data for the flash light.Normally when measuring flash light, the aim is to set a proper exposure for the cameras. For this, the Mavospec is useless.For this purpose, use e. g. a Seconic exposure meter.Tore

Q: 9. Where is this made?

A: It is made in the USA.

Q: 10. Does Gossen Digisix II.fit on an accessory shoe; like on an old Nikon S2?

A: The Gossen Digisix 2 Ambient Light Meter has a 1/4" screw opening in the back. You can use an adapter like this to place it on the shoe of a camera. https://www.bhphotovideo.com/c/product/860269-REG/Revo_sa_cs_14m_Hot_Shoe_to_1_4.html