Stay protected and streamline service with the 2-Year Onsite Extended Warranty for 5862RK IFP Display from Optoma Technology. Providing two years of coverage, this manufacturer extended warranty combines with the standard warranty for a total of five years of coverage. Materials and workmanship are covered. Plus, recover quickly from issues with onsite service after remote diagnosis.

For Optoma Technology 5862RK IFP Display    Manufacturer Extended Warranty    Covers Materials and Workmanship    Onsite Service After Remote Diagnosis

Related Questions and Answers

Q: 1. Is this mount compatible with the Optoma WU336 DLP Projector?

A: yes it is. note this low profile mount is the one that comes with a long (adjustable) extension pole. so be sure that is what you need? Else for install that does not require a extension pole, the Optoma model OCM818W-RU is recommended and fully compatible. https://www.bhphotovideo.com/c/product/1085056-REG/optoma_technology_ocm818w_ru_quick_adjusting_universal_projector.html

Q: 2. can this be mounted upside down

A: Yes it may be mounted in an upside down position. See pages 15,16, and 44: https://www.bhphotovideo.com/lit_files/596187.pdf Per Optoma: Projector should be placed flat on a surface and 90 degrees / perpendicular to the screen. ‡ How to determine projector location for a given screen size, please refer to distance table on page 44. ‡ How to determine screen size for a given distance, please refer to distance table on page 44. Note: The further away the projector is placed from the screen the projected image size increases and vertical offset also increases proportionally. IMPORTANT! Do not operate the projector in any orientation other that table top or ceiling mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please contact Optoma. Installing the projector: Your projector is designed to be installed in one of four possible positions. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.

Q: 3. It's capable for 24/7 operation?

A: The Optoma Technology 4K400x 4000-Lumen UHD 4K DLP Projector and other lamp projectors need to be powered off for 5 -10 minutes once every 24 hours.

Q: 4. We have 13'4" throw distance currently. What would the screen size range be in that case?

A: At a 13' 4" throw distance, this projector would deliver a 113" to 125" diagonal image.

Q: 5. Does this item include the power cable to plug into the wall (Not pictured)?

A: Yes it does.

Q: 6. Will this work at night to project movies onto the side of a building from about 20’ away?

A: Yes it will.

Q: 7. Is this compatible with a canon cr-n100?

A: The Optoma Technology Quick Adjusting Universal Projector Pole Mount (White), B&H # OPOCM815W, would not work with Canon CR-N100. For the Canon CR-N100 4K NDI PTZ Camera with 20x Zoom (Satin Black), B&H # CAPTZCRN100B, you can use the Impact Ceiling Mount Light Stand (B&H # IMLSCM) with the Impact BHE-104 Camera Platform for Flex Arm (B&H # IMBHE104).

Q: 8. Can this projector do 4.2:1 aspect ratio?

A: The Optoma Technology 4K400x 4000-Lumen UHD 4K DLP Projector BH #OP4K400X cannot format a 4.2:1 aspect ratio.

Q: 9. Will this work with the Optoma eh200st?

A: Yes. The Optoma Technology Quick Adjusting Universal Projector Pole Mount (Black) BH #OPOCM815B • is compatible with the Optoma Technology EH200ST 3000-Lumen Full HD 3D Short-Throw Multimedia DLP Projector BH #OPEH200ST • MFR #EH200ST

Q: 10. This is not true optical output for audio. It's only 2 channel. Why do you list it as optical?

A: The Optoma Technology UHZ65LV XPR 4K UHD Laser DLP Projector (B&H # OPUHZ65LV) features a true TOSLINK optical audio output that happens to be two-channel stereo. TOSLINK digital optical audio can decode two channels of uncompressed, PCM audio or compressed 5.1/7.1 surround sound audio signals.