Enhance your gigging experience with the simple and reliable Gator Frameworks Compact Fixed Boom Mic Stand with Tripod Base, a lightweight mic stand with a single-section boom and a collapsible tripod base. This mic stand is ideal for live applications and small studios, sporting an easily operated twist clutch for quick height adjustments and a cable organization clip to keep your cords neat and untangled.

This mic stand features non-slip rubber feet with removable red safety trim to keep the stand from moving its position on stage or in the studio, and a standard 5/8" mic clip is included, so you can get to work right away.

Compact, Lightweight Design    Collapsible Tripod Base    Standard Twist Clutch    Single-Section Boom    Non-Slip Rubber Feet    Removable Red Safety Trim    Includes 5/8" Mic Clip

Related Questions and Answers

Q: 1. Can you use this with alien bees strobe?

A: Yes. It works with Alien Bee Strobes.

Q: 2. How do these compare with their On-Stage counterparts as far as weight, durability, and portability go?

A: The Auray MS-5230F Tripod Microphone Stand with Fixed Boom is made of steel and weighs 4.5 lbs. The On-Stage MS7701B Euro-Boom Mic Stand has a fixed boom, is made of steel, and weighs 5.2 lbs. The height and boom length are similar for both stands. The MS-5230F is height adjustable from 36.2 to 63" and has a boom length of 31.5". The base dimensions are 25.6 x 25.6". The MS7701B is height adjustable from 37 to 64" and has a boom length of 31". Its base dimensions are 23 x 23". For the shorter stands, the Auray MS-5220T Short Tripod Microphone Stand with Telescoping Boom is made of steel and weighs 3.5 lbs. The height is adjustable from 22.1 to 31.5", the base dimensions are 19.7 x 19.7" and the boom extends from 19.3 to 33.9". The On-Stage MS7411TB Kick Drum / Amp Tripod Mic Stand with Boom is made of steel and weighs approximately 4 lbs. The height is adjustable from 17 to 27", the base dimensions are 26 x 26" and the boom extends from 20 to 36". All of the stands adjust and fold up in the same manner.

Q: 3. Can the bag for the 3 stand combo fit more than 3 stands?

A: We would only recommend 3 stands, as suggested, for the Three Mic Stands and Cables Kit with Stand Bag.

Q: 4. How small is it, when it's all folded down for storage?

A: Around 52 inches, without any disassembly. I am not sure where the 32 inches came from.

Q: 5. Made in?

A: Made in China

Q: 6. How would I attach a Sennheiser 600 to this boom pole?

A: Your shotgun mic should have come with a shock mount. This mount will have a camera adapter and 3/8 adapter thread. Use a href= http://www.bhphotovideo.com/c/product/305934-REG/AKG_KM216BLACK_3_8_Male_to_5_8.html target= _blank http://www.bhphotovideo.com/c/product/305934-REG/AKG_KM216BLACK_3_8_Male_to_5_8.html/a to thread on end of boom then attach shotgun with 3/8 thread hole. I use a 3/8 bolt to adjust tighten point. Hope this helps.

Q: 7. Can a Rode Video Mic Pro be directly attached to the boom pole?

A: You would need a 3/8'' male to 5/8'' female adapter to be able to do that, like B&H # AUAD5838B for example.

Q: 8. Can I attach a microphone for video purposes?

A: Yes you can. Just add one of this: https://a href= http://www.bhphotovideo.com/c/product/217590-REG/Sennheiser_MZQ1_MZQ1_Microphone_Clamp.html target= _blank www.bhphotovideo.com/c/product/217590-REG/Sennheiser_MZQ1_MZQ1_Microphone_Clamp.html/a

Q: 9. Is the leg 22mm?

A: Yes, the legs are 22mm at the ends.

Q: 10. What would I need to mount Rode Video Mic Pro on this boom stand?

A: The Rode mic has a cold or hot shoe mount. There are a lot of different mounts from B&H, Amazon and ebay that you can look at. For instance, B&H has WindTech CM-58 Hot Shoe to 5/8 -27 Microphone Adapter / WindTech CM-57 Hot Shoe Adapter (Brass) / Audio-Technica AT8469 Camera Shoe Mount to 5/8 -27 and 3/8 -16 Threaded Base Adapter / It looks like it would work fine. Hope this helps, Happy recording!