Connect a microphone to a camera, mixer, or recording device using this 5' 3-Pin XLR Male to 3-Pin XLR Female Audio Cable from Kondor Blue. The male 3-pin XLR connector inserts into your recording device of choice, while the female 3-pin XLR connector connects to your microphone. The cable's total length of 5' ensures easy integration into your preexisting setup.

Audio Cable    3-Pin Male XLR Connector    3-Pin Female XLR Connector    5' Total Length

Related Questions and Answers

Q: 1. Will this cable work well with a C300 Mark II ?

A: The Kondor Blue D-Tap to 4-Pin Coiled Power Cable for Canon C200 is also compatible with the Canon C300 MKIII.

Q: 2. Will this work with Bebob V-mount batteries?

A: Unfortunately, no. Bebob V-mount batteries are compatible with Bebob, IDX, and Sony chargers.

Q: 3. Is this passive? i.e. Can I use the XLR as an input and the 3.5mm as an output?

A: This will not act as a USB interface and will only route the audio signal in one direction.

Q: 4. The overview says, "This allows you to play back your computer's audio over your home audio system," but few (if any) stereos have a "mic input," they are all line-level inputs (from CD player, tuner, tape, home theater processor, etc.). Does output from the LSP-1 need to go through a microphone preamp before connecting to a home stereo system? Thank you for your help!

A: This unit is designed to allow you to connect any audio source with a line level, 3.5mm jack style, output to a mic preamp on a mixer. The output must be connected to a mic preamp to playback at a listenable level.

Q: 5. This will charge D&O lighting 190Wh ?

A: Yes, this should work with all V-Mount batteries.

Q: 6. Is it an XLR connection? Male Female?

A: This headset is designed to work with the Eartech Simultalk 24G, which have proprietary connectors.

Q: 7. What is the max wattage rating for this adapter plate?

A: This adapter has a 12 to 14.4 VDC Output an allows you to power equipment with a 4 Pin XLR power input with a V-Mount Battery.

Q: 8. Currently Have a Sony ECM-MS957 - Stereo Condenser Microphone with the 5 pin XLR Female outWill this Rode cable isolate 2 mono channels into the male XLRs?

A: Hi Robert, I use this cable with my AT BP4029 stereo microphone and plug the 2 male xlr into my zoom recorder. Each male XLR connector have the signal of each channel. My mic is also MS, so connector 1 carries the Mid, and connector 2 carries the Side channels. I hope this help you

Q: 9. Will this allow me to use the microphone on an external headset to record with a Tascam DR-40 or Zoom H6?

A: It seems like you are referencing the 3.5mm TRRS connection headset that would usually connect to a smartphone. If that is what you are referencing, then no that will not work with this adapter going into a Tascam DR-40 or Zoom H6.

Q: 10. Is this what I need to connect my Azden SGM 1X condenser mic to my sony HDR-CX900 camera 3.5 mm mic input?

A: This is a specialty cable designed for a 5 pin stereo XLR connection. Use this: Kopul LMT100 - Low to High Impedance Matching Transformer (1.5') B&H # KOLMT100