Designed to connect to virtually any device, the gray Audioengine A1 Bluetooth Speaker System provides an 1/8" input and Bluetooth connectivity with aptX support, which allows for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak. For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with speaker wire.

Up to 30W of Total RMS Power    Bluetooth Audio Streaming    S6 Subwoofer with 6" Long-Throw Woofer    S6 Subwoofer with 210W of Peak Power    2.75" Woofer & 0.75" Tweeter per Speaker    3.5mm Input, Subwoofer Output    Compact Design at 4" Wide

With aramid fiber woofers, silk tweeters, and built-in amplifiers, the A1 speakers are designed to produce big sound from a compact frame. Enhanced bass is provided by the front-firing slot-style port, without the use of digital signal processing or bass boost circuitry.

Connect to your TV or turntable via the 1/8" jack or listen to your favorite streaming service via aptX Bluetooth without having to manually switch between sources.

• LFE variable line-out for subwoofer

• Auto-switching power supply

• Up to 16 bits / 48 kHz native sample rate

• Wireless latency of up to 30 ms

Related Questions and Answers

Q: 1. What’s the power connection 220 or 110

A: The Audioengine A2+ Wireless Bluetooth Speaker System power input is 100 to 240 VAC, 50 / 60 Hz.

Q: 2. Does this speaker have an energy saver that delays the startup of sound? I hope not...

A: Don't know of any delay. No energy saver . We usually select music after units are turned on. Awesome speakers. Placement important for maximum enjoyment.

Q: 3. I am overseas and our power is 220v the unit says it can handle that. Is there a converter on the power cord or is it internal?

A: The Audioengine S8 8" 250W Subwoofer (Black), B&H # AUAS8B, is able to accept AC input power of anywhere from 100 to 240V. A plug adapter is necessary to use this subwoofer internationally, but an additional transformer will not be needed.

Q: 4. Does that 11.25 height measurement include the feet/spikes or not? If not, are they removable?

A: The actual height of the unit is almost 14 inches. You wouldn't want to take the feet off, since the speaker cone is in the bottom.

Q: 5. working with limited space, 8" shelf but has 12" depth & 4ft width. can these speakers be placed on their side and still work good? also does it come with anything to decouple the speakers from a tv stand/shelf?

A: It is not recommended but sure you can do that and they will still work good. The A5+ does not come with any attachments for a stand, they are made to sit on any flat surface.

Q: 6. Is there a place to attach my record players ground wire on these speakers?

A: speakers do not require ground. All ground wires should be attached to the receiver

Q: 7. Do these work with any of your wall mounts?

A: These active speakers are not designed for typical speaker wall mounts. These should work: Adjust the width of the mount with the telescoping base to fit nearly any speaker. Designed for any bookshelf speaker including speakers without threaded inserts or keyhole slots. Peerless-AV Bookshelf Speaker Mount (26 lb Capacity, 2-Pack BH #PESPK26 - https://bhpho.to/2RsxsjD

Q: 8. Can I play music off my iPhone?

A: Yes - you can plug them in directly through the headphone jack on your phone, or purchase a Bluetooth receiver.

Q: 9. Hello! Is this used subwoofer black or white? Because the photo is the black one. Thanks

A: This Audioengine S8 8" 250W Subwoofer (Black) BH #AUAS8B • MFR #S8 BLACK would be in the color Black. But we do offer it in White, BH #AUAS8W • MFR #S8 WHITE

Q: 10. is there a material i could use to increase separation between the speakers and my tempered glass tv stand? trying to minimize vibrations. using the audio engine ds1 speaker stands ( B&H#AUADS1 ) and they work well. just looking to add an additional thin pad underneath to absorb a little more vibration

A: I recommend considering the Audioengine DS1 stands BH #AUADS1