Rear View Mirror High Beams

Eliminator Lighting Cosmic Burst High-powered 10w Laser Moonflower Effect

Product Code: ga121075
Availability: In Stock

$1,499.97 $2,129.96

Qty

6 reviews Write a review

Description
Reviews (6)

Mobile DJs and event coordinators in need of a dramatic moonflower effect will appreciate the Eliminator Lighting Cosmic Burst, a futuristic moonflower that's powered by a high-output 10W laser. The fixture produces hundreds of white, yellow, green, and blue beams of light that rotate back and forth from two independent mirror dishes.

It's massive beam spread makes it ideal for projecting on ceilings and walls at nightclubs, roller rinks, fun centers, stages, and live events. Use it with or without atmospheric effects (fog/haze). The Cosmic Burst includes 5 built-in lightshows and DMX (6/7 channels) to fully customize your light experience. The bright OLED display with 4-button menu allows for quick and easy control of this fixture.

Powerful Moonflower Effect Powered by 10W Laser Module Hundreds of Light Beams White, Yellow, Green, and Blue Beams Two Independent Mirror Dishes 87° Beam Angle 5 Built-In Light Shows OLED Menu Display with 4-Buttons Includes Laser Safety Lock with Key Includes Locking Power Cord

Key Specs
Fixture Type	Special Design
Light Source	Laser Diode
Colors	Blue, Green, White, Yellow
Beam Angle	87°
Control Protocols	DMX512, RDM
AC Input Power	100 to 240 VAC, 50/60 Hz
Power / Current Consumption	20 W
Mounting	Mounting Bracket
Light
Fixture Type	Special Design
Light Source	Laser Diode
Expected Lamp Life	10,000 Hours
Colors	Blue, Green, White, Yellow
Color Temperature	6000 to 8000K
Beam Angle	87°
Shutter / Strobe	Electronic
Zoom Adjustment	No
Dimming	0 to 100%
Performance
Operating Modes	Automatic, DMX, Primary/Secondary
Macros / Programs	5x Auto-Program
Effects	Strobe
Gobos	No
Control
Control Protocols	DMX512, RDM
DMX Channel Modes	2 Mode(s): 6 / 7-Channel
Display / Controls	OLED Touchscreen / 4-Button
Remote Control	No
Mobile App Compatible	No
Connectivity
Inputs/Outputs	1 x XLR 3-Pin DMX Input 1 x XLR 3-Pin DMX Output
Power
AC Input Power	100 to 240 VAC, 50/60 Hz
AC Power Connector	Input: 1x powerCON Output: None
Power / Current Consumption	20 W
Physical
Environmental Resistance	Dust-Resistant (IP20)
Mounting	Mounting Bracket
Included Accessories	No
Duty Cycle	No
Exterior Color	Black
Dimensions	9.4 x 8.7 x 7.8" / 23.9 x 22.1 x 19.8 cm
Weight	4.4 lb / 2 kg
Packaging Info
Package Weight	6.085 lb
Box Dimensions (LxWxH)	12.3 x 10.4 x 9.2"

10W laser module
Color temperature: 6200K
Beam angle: 87°
Display: OLED with 4-button menu system
DMX control modes: 6 or 7 channels
Five built-in lightshows
Protocols: DMX512 and RDM
Smooth dimming from 0~100%
Adjustable strobe, shutter, and pulse effects
Mirror control: Clockwise/Counter Clockwise; Fast/Slow
DMX data: 3-pin XLR In/Out
Power input: powerCON connector
Includes laser safety key with on/off lock
Safety cable connection slot

Related Questions and Answers

Q: 1. What cable do I need if my set up is Tiltaing Battery Baseplate 12V out to Shinobi? The D-tap cable is for the Camera.

A: This will require the DC to D-tap cable from Atomos (in addition to the battery eliminator)

Q: 2. Is the DC to DC step-down converter in the dummy battery box capable of handling input voltage higher than the average USB 5v? I'm hoping it's one of those step-downs that can handle 4.5 to 12 or 19, etc volts in because I want to use this with hard-wired vehicle power instead of a 12v to USB adapter. I'm not interested in adapters - I only want to know if I can feed in higher voltage and it will correctly convert to the 3.7-4V that the GoPro needs.

A: CamDo has a version that will support up to 24V input.

Q: 3. Will the GoPro turn on by istelf once this cable is powered or do you still need to press the ON button physically on camera?

A: Supplying the power is just like putting a charged battery into the GoPro. You still need to turn it on afterwards. Wireless will also be off until re-activated.

Q: 4. Which cable would you need in order to connect this to a dummy battery like an Ansso NP-F970 F970 to LP-E6 Full Decoded DC Coupler Power Adapter Battery?

A: Hello Marc, unfortuantely the LP-e6 batters are quite low powered so they won't last too long, however there are people who have bought/made the NP-F to LP-E6 adapters. you'll need to get one of those.

Q: 5. I am trying to connect this to the power junkie and I cannot find a locking dc cable for the life of me. Do you know what cable I can buy that will connect this to the power junkie? The power junkie takes a DC 2.5mm

A: This would be DC to Dtap: https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html. Standard Dtap cable on the other side.

Q: 6. is this powered with Litegear S2 panels or the new LiteMat Plus?

A: This unit uses LiteGear LED engine

Q: 7. Just wondering if this light be run off DC and what voltage would it require? Thanks

A: This light can only be used with AC power.

Q: 8. Will this work with the hero 5?

A: No.

Q: 9. What is the cpi andscreen resolution?

A: The Boox 10.3" Note Air3 C Tablet (Cosmic Black), B&H # BOOPC1128R, has a screen resolution of 2480 x 1860 (300 ppi / Black & White mode) and 1240 x 930 (150 ppi / Color mode).

Q: 10. Will this work with the SmallHD Focus 7 monitor?

A: Yes, but I would recommend B&H # SMCDCSONYLUS instead.

LookitsBryon	06/09/2024
[This review was collected as part of a promotion.] Love this pad charger,wore out mt charger port on my I-Phone using pug in to charge 5

Chase0325	16/08/2024
[This review was collected as part of a promotion.] Outputs up to 10W of power — twice the amount from your Apple charging cable & adapter. Roughly an hour to charge your dead iPhone to 100%! 5

1SteveH	01/08/2024
[This review was collected as part of a promotion.] If you have a phone that permits induction charging it works well. But my phone-while it definitely works well on (electro magnetic) induction is in a leather case-so serves as a wallet. The charger just won’t charge through that space and the only way it will work - for me - would be for me to take the phone out of the case- at that rate I might as well just traditionally plug it in. Now if Bellini would create a case with the induction capabilities built in- than that might work! The other thing is that I have a smart watch (Samsung) which would be great if i could charge that on this Pad, but it appears that the coils are too far out to work phone the watch. I mean the idea is that when you travel you want less stuff to carry not more. But as it is designed it is simple and fast for those who don’t have leather cases around their phone 5

Steve20	21/06/2024
[This review was collected as part of a promotion.] I have been using this charger for two weeks and found it to be very fast to recharge my iPhone X. It is very small so it doesn’t take up much space, but you have to be careful to place it on the surface correctly, and make sure the white light is on. I have another wireless charger and this one is much faster. I have been charging it with a tech 21 case on it and it works great, no need to remove the case. 5

William M	13/04/2024
[This review was collected as part of a promotion.] The Belkin Wireless Charging Pad 10W is convenient because of its size and functionality. The pad’s profile is sleek and because it’s flat and barely noticeable wherever it’s placed, it’s perfect for clogged desks. The pad has an inner ring that serves as a guideline for the iPhone placement. It does not matter where or how the iPhone is placed on the pad as long as the Apple logo of the phone is touching the ring. The phone will charge – it does not matter whether the iPhone is placed pointing to or perpendicular to the power cable. I tested the charger with three different iPhones: mine is an iPhone XS with a soft plastic cover, my wife’s iPhone XR with an Otter cover, and my daughter’s iPhone XI also with a soft plastic cover– the charger behaved exactly the same with all three iPhones; it took just over one minute for each one percent of charge. I definitely recommend this charger to anybody who wants the convenience of wireless charging combined with reliability and space saving. 5

Dennis R	30/11/-0001
[This review was collected as part of a promotion.] Great build quality and a solid feel adds to the sleekness of this Qi wireless charging disk. Boasting a fast 10W charging capacity, I’m experiencing 35min charges from about 20% to fully charged! The silicone on top and bottom keep the charger and your phone from slipping. Solid design. Fast charging performance. 5