Confidently mount outdoor displays weighing up to 88 lb with the Kanto Living PS400SG Outdoor Full-Motion Wall Mount. Designed for outdoor installation, the PS400G meets stringent guidelines for reliability, even in harsh environments. This articulating single-arm mount has a low-profile of just 1.9" from the wall when retracted and can extend up to 27.6". When fully extended the PS400G can swivel up to 90° left or right, depending on the screen size. Additionally, you can tilt the display 12° forward or 2° backward to improve line of sight or reduce glare from ambient lighting. 

Supports 30 to 70" Displays up to 88 lb    100 x 100 to 400 x 400 VESA Support    UL-Rated for Outdoor Use    -2 to 12° Tilt    180° Swivel Adjustment    1.9" Profile When Retracted    Extends up to 27.6" From the Wall    Adjustable Horizontal Leveling    Integrated Cable Management    Security Screws Included

All mount components are made of galvanized or stainless steel with a powder-coated finish. You don’t have to worry about rust and corrosion, even on the inside of the articulating arms. Thanks to its UL 2442 Part 2 certification, you can confidently mount the PS400G outside and leave it in the rain, sun, or snow for years without worry. 

Extending 27.6” from the wall, the Kanto PS400SG outdoor-rated articulating arm allows you to pan, swivel, and tilt your TV to the best viewing position. This swivel TV mount for 30 to 70 inch TVs can freely move 90° in either direction (depending on the TV size).

The sleek design ensures that your TV sits 1.9 inches from the wall when fully retracted. The mount also includes lag bolt covers and an all metal cable management system that won’t degrade from UV exposure.

Related Questions and Answers

Q: 1. Height Adjustable from 48 to 65.7" Where is this measured from in regards to the display? Could center of the display be 65.7"?

A: Height adjustment for the Kanto Living Rolling TV Cart with Height Adjustment for 55 to 86" Displays (B&H # KAMTM86PL) is measured from the center of the mounting plate to the floor.

Q: 2. Does the part that attaches the projector allow for tilting, too? I know the part that attaches to the ceiling tilts. My projector screen is close to the floor and I am wondering if I can tilt the projector so that it will project onto a low screen.

A: The Kanto Living P301 Slanted Ceiling Projector Mount (B&H # KAP301) has a 90° pivot point that allows for 20° of tilt once a projector is mounted. The point at which the projector attaches, however, is fixed. To project onto a low screen, you may have to angle this mount slightly downwards, then use your projector's keystone functionality to correct any image distortion.

Q: 3. How does the PX720 differ from the PDX700?

A: The Kanto Living PX720 Articulating Full Motion TV Wall Mount f/42-100" TVs BH #KAPX720 is a basically a refreshed Kanto Living PDX700 Full-Motion Wall Mount for 42 to 100" TVs (Black)BH #KAPDX700 , with no substantial differences between them.

Q: 4. is it compatible with Sony X950G 55" Class HDR 4K UHD Smart LED TV?

A: Your TV has a compatible VESA pattern (bolt pattern) of 300x300 and is under the weight capacity of the M300 so it should work well! Please email us directly at support@kantoliving.com if you have any other questions and we'll be happy to help.

Q: 5. For the telescoping height range, are 41.7" and 61.4" the only two options, or can be set anywhere in between?

A: The telescoping height adjustable pole on the Mount-It! MI-509L Full Motion Ceiling Mount for 32 to 70" Displays can be set to many different height increments between 41.7" and 61.4".

Q: 6. Is the tv to bracket hardware included?

A: The Gabor FSM-L Full-Swing Large Wall Mount for 40 to 70" Displays BH #GAFSML is complete with all brackets and hardware.

Q: 7. Will this work on a projector with 4 screw holes 12" apart from each other?

A: Claudio, The P101 will work with any projector that has 4 screw holes. The extension arms are long enough to accommodate your projector. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

Q: 8. Can you mount the camera base below the monitor?

A: It depends on what kinds of mounting options your camera has.

Q: 9. Will this fit a BenQ LK952?

A: If you could please email us directly at support@kantoliving.com and pass along your projectors full model number and we would be happy to determine compatibility for you.

Q: 10. Does it matter whether this is mounted to a metal or wooden stud? And would it be able to be mounted to horizontal studs?

A: The Gabor FSM-N Full-Swing Nano Wall Mount for 10 to 30" Flat-Panel Displays BH #GAFSMN can be mounted to either metal or wood, as long as it is secure enough.