Audio professionals looking for a portable sound system that delivers serious output will be impressed with the Anchor Audio GG2-R Go Getter 2, a portable sound system with built-in Bluetooth and Anchor Audio's AIR Wireless Companion Receiver. The speaker delivers 109 dB of clear sound and features easy-to-use controls. It is suitable for both voice and background music, and at 15 lb, is portable and easy to set up on an optional speaker stand (not included). The GG2-R Go Getter 2 can be used indoors or outdoors and features AC/DC operation. It comes with a built-in AIR wireless companion receiver that wirelessly connects to one or more Go Getter AIR battery-powered transmitter speakers (available separately).

This portable sound system, with its built-in Bluetooth, can operate up to 8 hours on a full charge (at medium volume) with the built-in rechargeable battery. It has a Bluetooth range of 100' (line of sight) and is built with a 6.5" woven fiber woofer and a high-output horn tweeter. In addition, the back panel features two combo XLR-1/4" microphone inputs, 1/4" and 3.5mm line inputs, and an LED battery display that indicates charging and low battery. There is a speaker output connector that can drive an optional unpowered companion speaker (available separately), so you can increase the range of the sound. The GG2-R Go Getter 2 is suitable for school functions, corporate training, fitness centers, houses of worship, and more.

109 dB of Clear Sound    Reaches Crowds up to 500+    Built-In Bluetooth    AIR Wireless Companion Receiver    AC/DC Operation    6.5" Woven Fiber Woofer    Two Combo XLR-1/4" Microphone Inputs    Built-In Rechargeable Battery    Runs up to 8 Hours on Single Charge    1/4" & 3.5mm Line Input Jacks

• Built-in Class 1 Bluetooth 
• Built-in rechargeable batteries operate 6 - 8 hours on a single charge 
• Receiver connects additional units via Anchor AIR technology
• 109 dB of clear sound (reaches crowds up to 500+)
• 300’+ wireless range
• Two combo XLR-1/4" mic inputs
• 1/4” & 3.5mm AUX line inputs
• 1/4” line output
• Built-in rechargeable lithium-ion battery
• High output horn tweeter
• 6.5” woven fiber woofer

Related Questions and Answers

Q: 1. what is R&L in port used for?

A: The 3.5mm Right/Left input connection is used to connect and mix in an auxiliary audio source such as music from a device alongside the microphone signals on the Pyle Pro PDWM4120 UHF Wireless System with 4 Handheld Microphones & Receiver with Bluetooth.

Q: 2. Can I put a blackstar tone:link on a guitar to pair to an echo?

A: This unit is a Bluetooth Receiver. It is designed to connect to a line input on an amplifier to allow you to stream music from a bluetooth enabled audio device to the amp. This unit will not work connected to a guitar.

Q: 3. Does it take headphone/microphone combo, for phone calls? Or does it only work with built-in mic?

A: The Aluratek AISM01F Bluetooth Audio Receiver would only function as a Headphone with no mic line in feature.

Q: 4. can this be used with a usb hub, a powered hub? i only have one usb-c port om my computer.

A: Yes, the M Audio AIR | Hub Desktop USB Monitoring Interface with Built-In USB Hub can be connected to the computer via powered USB hub.

Q: 5. I assume this would hookup to an iPAD, but my question is would it supply power to an iPAD also?

A: No

Q: 6. can i always leave it on and it will connect automatically when i get to my car if i leave phone Bluetooth on ?

A: The Aluratek AISM01F Bluetooth Audio Receiver (B&H # ALAISM01F) only charges via the included USB cable, not the 3.5mm cable that would be plugged into a car. This receiver has an estimated battery life of 5 hours, so it would not be advisable to leave it on at all times.

Q: 7. How many paired devices does it remember?

A: The Galaxy Audio JIB/BT8R Bluetooth Audio Receiver would not remember any paired devices. If you are using a source with a Bluetooth transmitter built in, like a smartphone or tablet, it will have the ability to remember the Galaxy Audio JIB/BT8R Bluetooth Audio Receiver so that you can select it and pair it.

Q: 8. What is the lowest buffer size?

A: Buffer size would be set in your DAW.

Q: 9. Does it make any sound when pairing?

A: No, unfortunately the Aluratek AISM01F Bluetooth Audio Receiver would use it's LED to notify if pairing or connected.

Q: 10. Does this identify as 4x separate outputs (mains & monitors) in a DAW?

A: No, this will only give you the main stereo output signal in both main outs and headphones.