Built with CRMX modules from LumenRadio for filmmakers, broadcasters, and others, the TimoLink TX Wireless DMX Transmitter from Godox converts a wired DMX console to wireless by sending signals to CRMX-compatible fixtures or receivers. The TimoLink TX supports automatic frequency hopping and has a CRMX transmission range of up to 984'. The male, five-pin XLR connector rotates up to 270° for wider compatibility with different interface designs. The unit also comes with a test feature that detects whether or not a DMX signal is successfully outputted, and to simplify operational logic and enhance efficiency, the set and reset button were designed separately.

Built-In LumenRadio CRMX Transmitter    Up to 984' Long-Range Transmission    5-Pin Male XLR Connector Rotates 270°    Test Function Checks Connection Status

Related Questions and Answers

Q: 1. Will this work with a Sony receiver in the 566 MHz range?

A: The Saramonic TX-XLR9 Wireless Plug-On Transmitter (514 to 596 MHz) is not compatible with Sony Receivers. Sony receivers are only compatible with Sony transmitters.

Q: 2. Compatible with Ratpac Satellite?

A: The Godox TimoLink RX Wireless DMX Receiver BH #GORX is a CRMX receiver and should be able to receive signal from any CRMX compatible transmitter.

Q: 3. Will this work with the Exalux Control One?

A: No, the Exalux system runs on a CRMX, DMX512 protocol system we suggest looking into the following adapter which works with the Exalux system via DMX input and will provide a Lumen Radio CRMX protocol signal. Godox TimoLink TX Wireless DMX Transmitter BH #GOTX • MFR #TIMOLINK TX https://www.bhphotovideo.com/c/product/1748675-REG/godox_tx_wireless_dmx_transmitter.html

Q: 4. Can it work with UWMIC9S receiver

A: No, the new Saramonic UwMic9S components are not backwards compatible with the older UwMic9 series components like the Saramonic TX-XLR9 Wireless Plug-On Transmitter.

Q: 5. Which receive can I use?

A: This plug-on transmitter will work with the following system: Saramonic UWMIC9 RX9 + TX9, 96-Channel Digital UHF Wireless Lavalier Mic System (514 to 596 MHz) B&H # SARX9TX9. The Saramonic RX9 receiver is not sold separately.

Q: 6. Can this control CRMX lights like the Aputure MC Pro, or can it only be used to link to the TimoLink RX Wireless DMX Receiver?

A: The Godox TimoLink TX Wireless DMX Transmitter BH #GOTX can be used to communicate directly to CRMX compatible fixtures.

Q: 7. What is the most affordable CRMX receiver for any light?

A: It is one of the most affordable. Blizzard also makes a very affordable option.

Q: 8. If I used all three of these with a board like the SDC12 how would channel assignments work? Would they just go 1, 2, 3 automatically or would I need to do something else?

A: You assign a Dmx address for each light and choose channels for each fixture as needed.

Q: 9. Can one TimoLink TX send signals to multiple TimoLink RX units?

A: The Godox TimoLink TX Wireless DMX Transmitter is for a control board and will work with multiple lights that are CRMX-compatible.

Q: 10. Is this compatible with RatPac AKS+ TX?

A: Technically the Godox TimoLink RX Wireless DMX Receiver from the description on the RatPac AKS+ TX should work. But with out it being tested the outcome could vari. Best is to contact the manufacture of the RatPac AKS+ TX which we do not carry.