This 3.28' SQM Unbalanced Stereo Pair of Audio Cables with RCA Connectors from Grimm Audio takes the Grimm Audio cable philosophy of low microphonics and proper shielding to the next level. The resulting sound quality is a serious step up from Grimm's already excellent TPR cable. To optimize immunity from electric and magnetic fields, the screens are tightly woven (no see-through) and the conductors are well twisted. Carbon-dotted sheaths surround individual conductors and are beneath the braided screen, providing greater dynamics and a larger and deeper stereo image, allowing music to flow in a disarmingly natural way.

Ideal for Live Sound and Performance    WBT NextGen RCA Connectors    Woven Screen for Optimal Shielding    Carbon-Dotted Sheaths

Related Questions and Answers

Q: 1. Can I run the rear analog output of Marantz M-CR611 into SES-AUDIO-AB then out of the Sescom into 2 headphone amps using A/B switch to only play 1 headphone amp at a time ?

A: As long as you are using the RCA out to our unit, not the speaker out and converting, then yes our unit should work prefectly

Q: 2. I want to only use the left side of a stereo channel - does the balance pot act like a normal pan pot in this circumstance?

A: When only using the L channel on one of the EPM 6 - 6 Mono + 2 Stereo Audio Console, the channel will output the Left signal as a Mono signal. The panning will operate identically to the other mono channels.

Q: 3. What size slot is required to install these speakers?

A: There is a template included in the box to guide the cutout in the wall, but here are some of the dimensions. The Cutout Dimensions are 7 5/8" (19.2cm) diameter Overall Dimensions are 9" x 2 3/8" D (22.9cm x 6.0cm) Depth assumption 1/2" drywall 2 3/8" (6.0cm)

Q: 4. how is the audio quality of the analog outputs? Thanks, John.

A: While the perceived quality of analog audio is a highly subjective notion, we can report that user satisfaction with this product is very high and no negative feedback has been recorded in regards to audio quality.

Q: 5. If I plug a mono source (via TS or TRS) into the left input of a stereo channel, does the balance pot work as a normal pan pot?

A: The Soundcraft EPM 6 - 6 Mono + 2 Stereo Audio Console does not accept stereo signals and exclusively uses balanced inputs which are mono. You will need to use two cables, one for left, one for right, in order to add a stereo source.

Q: 6. Does the "Soundcraft EPM6 - 6 " run at 220V? Does this mixer have “AC Input Power = 100 to 240 VAC, 50 / 60 Hz”?

A: Yes, the Soundcraft EPM 6 - 6 Mono + 2 Stereo Audio Console, according to the specifications, is 85-270 V AC, 50/60 Hz universal input.

Q: 7. I plug in wireless mics on the line in input, but nothing happens with the faders?

A: There's no reason why the line inputs should not work normally. Try isolating the problem. Make sure nothing is muted, all gain/volume controls are up, and you have a good signal coming into your mixer. Then check to see if all channel line inputs are inop or just that particular channel. If any or all line inputs do not work, do the xlr inputs work? Check to see if you have a signal from the insert. This is pre-fader, so if you do and there is still no output post fader then the problem is somewhere between your gain circuit and and output .

Q: 8. Does it come with 1/4 cable?

A: No, the M-Audio BX4BT 4.5" 120W Studio Monitors do not come with a 1/4" cable. The studio monitors come with a 3.5mm TS speaker interconnect cable, a 3.5mm TRS aux cable, and a 3.5mm TRS to RCA cable.

Q: 9. Does it come with power supply?

A: Yes, the M-Audio BX4BT 4.5" 120W Studio Monitors do come with a 2-prong IEC power cable.

Q: 10. Are the two aux sends on this mixer both pre-faders?

A: Thank you for your question. Both AUX outs on this mixer are pre fader.