Best Laptop With 2 Hdmi Ports

Bolin Technology D20h Dante Av Transceiver (hdmi, 3-pack)

Product Code: ga122460
Availability: In Stock

$11,655.00 $17,365.95

Qty

0 reviews Write a review

Description
Reviews (0)

Configure this D20H Dante AV Transceiver from Bolin Technology as either a encoder or decoder depending on your routing needs. The D20 features an HDMI input and HDMI output for monitors. The HDMI output port supports up to DCI or UHD 4K60 video with HDCP 2.2 for demanding conference room or classroom applications.

Two RJ45 ports, one for Gigabit Ethernet and one with PoE support, offer connection to your IP network. Another RJ45 port offers RS-422 serial control, which is just one form of control you can utilize with the transceiver. USB Type-A ports can connect keyboards and/or mice to the device for USB-over-IP interfacing. An IR transmitter output and receiver input allows for remote control.

Configure as an Encoder or Decoder HDMI Input, HDMI Output Up to DCI/UHD 4K60 Video Gigabit Ethernet & PoE LAN Ports HDCP 2.2 Support, RS-422 Serial Control USB-over-IP Support

Key Specs
Video I/O	Input 1x HDMI 2.0 Female Output 1x HDMI 2.0 Female 1x BNC (12G-SDI) Female 1x HDMI 2.0 Female (Monitor)
Audio I/O	No
Video Resolution	HDMI Input/Output (8/10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps SDI Output (8/10/12-Bit 4:2:2/4:2:0 YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps RJ45 Input/Output (8-Bit 4:4:4 RGB, YCC) 4096 x 2160 up to 60 fps RJ45 Input/Output (8/10/12-Bit 4:2:2 YCC) 4096 x 2160 up to 60 fps
Audio Format	Unspecified Digital Signal Input/Output: 32 kHz Unspecified Digital Signal Input/Output: 96 kHz
Broadcast System Compatibility	NTSC, PAL
IP Video	Encoding, Decoding MJP2 4096 x 2160 at 60p (200.00 to 800 Mb/s)
IP Audio	Encoding, Decoding Dante
Wireless	No
OS Compatibility	Windows 10 or Later macOS 10.14 to 11
Parameters
Audio I/O	No
Other I/O	Input 1x Mini-USB (Service) 1x 1/8" / 3.5 mm (IR) 2x USB-A (Device) Output 1x 1/8" / 3.5 mm (IR) Input/Output 2x RJ45 (10/100/1000 Ethernet) 1x RJ45 (RS-422)
Expansion Slots	No
Latency	< 10 ms
Video Resolution	HDMI Input/Output (8/10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps SDI Output (8/10/12-Bit 4:2:2/4:2:0 YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps RJ45 Input/Output (8-Bit 4:4:4 RGB, YCC) 4096 x 2160 up to 60 fps RJ45 Input/Output (8/10/12-Bit 4:2:2 YCC) 4096 x 2160 up to 60 fps
Audio Format	Unspecified Digital Signal Input/Output: 32 kHz Unspecified Digital Signal Input/Output: 96 kHz
Embedded Audio	HDMI Input: 8-Channel HDMI Output: 2-Channel
Reclocking	No
Standards
Video Standard Compliance	SMPTE: 292M/352/424M/424M-A/ST-2081/ST-2082
HDCP Support	Yes, Version 2.2
HDR Support	Yes, HDR10
Broadcast System Compatibility	NTSC, PAL
IP Streaming
IP Video	Encoding, Decoding MJP2 4096 x 2160 at 60p (200.00 to 800 Mb/s)
IP Audio	Encoding, Decoding Dante
Transport Protocols	Dante
Hardware
Wireless	No
OS Compatibility	Windows 10 or Later macOS 10.14 to 11
Power
Power I/O	1x Barrel (12 VDC ) Input
PoE Support	PoE++ 802.3bt
General
Operating Conditions	22 to 72°F / -10 to 40°C at 10 to 90% Humidity
Storage Conditions	32 to 104°F / 0 to 40°C
Certifications	CE, FCC
Dimensions	8.5 x 5.84 x 1.7" / 216.5 x 148.35 x 44 mm
Weight	2.5 lb / 1.1 kg
Packaging Info
Package Weight	6.53 lb
Box Dimensions (LxWxH)	14.1 x 11.2 x 3.9"

The D20H Dante AV transceiver supports sub-microsecond video and audio synchronization by designating a single network clock that always keeps the video in sync with audio regardless of the number of endpoints in the ecosystem, fixing lip-sync problems.

As a decoder with unicast and multicast capabilities, the D20H receives the signal from a Dante AV PTZ camera or an encoder and feeds it to a display device via the output port. Using the controller software, the decoder can quickly and easily switch between multiple endpoints with no need for breakouts or matrix switches to display the video on any number of screens.

The transceiver can be configured as an individual encoder or decoder via a firmware update.

The D20H can output 4K60 images via its HDMI ports. An integrated high-performance scaling engine provides downscaling to the encoded source for a wide array of 4K, UHD 4K, and HD resolutions to match the different capabilities and requirements of other equipment.

It supports standard Dante compatible networked audio streams from encoders and audio interfaces. The received Dante audio streaming can be combined with the video and then output via the HDMI ports.

A built-in RS-422 serial port can be used with a PTZ joystick controller. Full setup, control, and monitoring of the device is enabled with the Dante Controller software with features like automatic device discovery and system configuration. Two USB Type-A ports and a USB Mini-B port provide control over IP using a keyboard and/or mouse with a remote computer.

Related Questions and Answers

Q: 1. Can I use a single controller 622-n tx-i-ttl with a number of 3 transceivers?

A: I agree with the other answers, yes you can very easily.

Q: 2. Will TLL and HSS functionality be available if a 3rd party iTTL speedlight is connected (i.e. Meike MK-910)?

A: Only the flashes listed on the product page are the models that have be confirmed as compatible with this trigger. Your results may vary with any other flash that has not been tested.

Q: 3. I have an sb900 sb24 and vivitar 285 with my nikon D750. can I use it.? thank you

A: As manual devise - yes (no TTL), I used old flash Olympus32 with D750 its working great.

Q: 4. Will these work with a D7200?

A: Yes they will

Q: 5. Do the Bolin PTZ cameras use UVC-PTZ?

A: This model camera, the Bolin Technology B2-220 HDMI/3G-SDI/USB/IP PTZ Camera with 20x Optical Zoom does offer UVC/UAC. This may not be the case across their entire lineup however.

Q: 6. Will these trigger an SB-300 Speedlight?

A: Yes no problem

Q: 7. Can I use the 622N II as wireless remote shutter release trigger?

A: Yes you can. However, if it is not a YongNuo speed light you must mount your speed light onto one of the transceivers. I.e. mount a Nikon SB-910 on one of the transceivers and use the other as a remote shutter release. Alternatively, if you do have a YongNuo speed light, all you have to do is set the speed light to act as a slave and you do not have to mount it on the other transceiver as it is a native function.

Q: 8. Will the Yongnuo yn622n ii work with my D500 and D810 using SB700 and SB800 speed lights?

A: most lokely but probably would require yongnuoo transmitter on camera

Q: 9. Will these work with a Nikon D610?

A: It will work on any nikon dslr camera. I use it on my D600.

Q: 10. Can you set the flash parameters on the YN622II transceiver using the in-camera menus Oreo you need to adjust the settings using the buttons on the YN622?

A: I never managed to set up the menu it is extremely cumbersome and difficult to manage. Personally, I do not recommend making this purchase.

There are no reviews for this product.