Monitor your camera with the Cine 7 Touchscreen On-Camera Monitor from SmallHD. Featuring a sharp 7" display suitable for indoor or outdoor use, the Cine 7 monitor supports up to UHD 4K HDMI output as well as various HD and SD formats via one full-size HDMI input, one HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output. The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI.

The Cine 7 features a bright 1800 cd/m², 322 ppi, 1920 x 1200 IPS LCD touchscreen with 3D LUT compatibility. Using the intuitive PageOS 4, you can turn on and save pages of various monitoring tools and focusing aids with a finger tap. At the rear of the monitor, an L-series mount battery plate accepts two L-series batteries for powering your monitor.

Cine 7 On-Camera Monitor    Teradek Bolt 6 Monitor Module 1500 RX    Monitor Handles and Neck Strap    7" 1920 x 1200 Touchscreen Display    Wirelessly Send Video and Camera Control    V-Mount Battery Plate on Bolt 6 RX

Daylight-viewable, 7" touchscreen on-camera monitor with 1800 cd/m² brightness

Slim, lightweight design with 10-bit, touchscreen IPS LCD panel

Supports up to 1080p60 video via full-size HDMI and 3G-SDI inputs

HDMI-to-SDI and SDI-to-HDMI cross conversion is supported

Uses SmallHD PageOS 4 to organize and save customized function and settings pages

The included dual L-series battery plate allows you to hot-swap batteries as necessary, and the plate itself is swappable for other battery plates

Four 1/4"-20 mounting points on top, left, right, and back

Related Questions and Answers

Q: 1. Does it come with the handles like in the photo?

A: Yes. The following is included in the kit SmallHD 702 Touch 7" On-Camera Monitor with Bolt 4K Receiver (V-Mount) SmallHD Monitor Handles and Neck Strap SmallHD Microfiber Cleaning Cloth SmallHD Ultraclear Screen Protector for 702 Touch and Cine 7 Monitors Teradek Bolt 4K RX Monitor Module for Cine 7 and 702 Touch (V-Mount) 8GB SD Card

Q: 2. Does the rx connects directly to the monutor and then i can power both by v mount battery? It seems obvios since it’s a kit but the images shows a different monitor and a flat surface on the RX

A: Yes, the Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series connects directly to the SmallHD 702 Touch 7" Monitor. A battery can power the module and monitor.

Q: 3. Will this work with a SmallHD 703?

A: The Teradek Bolt 6 RX 1500 Monitor Module for the Smart 7 Series supports the SmallHD Cine 7/Indie 7/702 Touch. It does not support the SmallHD 703 displays.

Q: 4. Is it possible to program this with a Bolt 500 system?

A: No it is not. It is only compatible with the 4K bolt products.

Q: 5. Are there any other methods to power this other than with V-mount? would the DC barrel connector power both the monitor AND RX?

A: Yes, there are DC barrels for powering the SmallHD 702 Touch 7" Monitor with Bolt 6 Monitor Module 750 RX Kit (V-Mount).

Q: 6. Can this transmit 4k over SDI like the XT Bolt 6 models or is it just 1080p like the LT Bolt 6 models?

A: Yes, the SmallHD ULTRA 7 Bolt 6 TX 1500 Monitor can transmit a 4K signal.

Q: 7. Would this work with Sony FX3?

A: Yes, the SmallHD 702 Touch 7" Monitor with Bolt 6 Monitor Module 750 RX Kit (V-Mount) could work with most any camera. Please note you will need to add a Teradek transmitter and V-mount battery to power the display, as well as an HDMI cable. Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter BH #TE102261 IndiPRO Tools 4 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual-Battery Charger Kit BH #INVMP98SCK (B&H Kit) ZILR ZRHAA03 Hyper Thin Ultra High-Speed HDMI Cable with Ethernet (17.7") BH #ZIZRHAA0345

Q: 8. whats the max brightness when the bolt 6 rx activated because in my cine7 there is limit when it attached to the rx 70% bright ?

A: SmallHD does not list the SmallHD Ultra 5 Bolt 6 RX 750 Monitor Kit (V-Mount) as changing its brightness. Regarding the Cine7, SmallHD cautions "*Some monitors will default to Studio Brightness if the power source (voltage) is low to help save energy. Change power sources to allow for Full Backlight capabilities."

Q: 9. Hi. Does it have Komodo functions and menu? Thanks

A: No, it does not. Only the "SmallHD Focus Pro with the Red Komodo Control Kit" can control the Red Komodo

Q: 10. How is it different from item BH #SMN702TO4KVM ?

A: One is a kit the other is not. SMN702TO4KVM comes with the teradek Bolt 4K RX Monitor Module for Cine 7 and 702 Touch.