Lighting professionals looking for a professional moving head for precision applications will be impressed with the Elation Professional FUZE WASH 500, a professional automated LED Fresnel wash fixture designed for theater, television, and a wide array of other lighting applications. A high-CRI engine utilizes a 5-color homogenized LED array consisting of red, green, blue, mint, and amber sources. Each LED is carefully tuned to ensure accurate color reproduction.

The FUZE WASH 500 is designed for any application where an automated Fresnel fixture with outstanding and impactful colors, a wide zoom range, and a soft field is required. An optional indexable ovalizer lens is available for additional beam control.

500W Full Spectrum RGBMA LED Engine    Motorized Zoom: 10° to 45°    Smooth Pan and Tilt Movement    Variable 16-Bit Dimming Curve Modes    CMY Emulation with Color Correction    Green / Magenta Shift    DMX Modes: RGBMA 21 / 28, CMY: 19 / 24    Flicker Free for Broadcast TV and Film    Includes Omega Brackets & Power Cord

• 500W full spectrum RGBMA LED engine
• Up to 17,000 total lumen fixture output at 6500K
• CRI up to 92
• Wide zoom range from 10° to 45°
• Variable 16-bit dimming curve modes
• CMY emulation
• Virtual color correction
• Green/magenta shift
• Virtual gel swatch book

Related Questions and Answers

Q: 1. Will the ELC Pro HD 500 work with the Skyport Speed Transmitter?

A: It will fire and adjust the flash, but the Pro HD 500 is not optimized for Hi-Sync because of its very short flash durations.

Q: 2. Can you shoot TTL mode with an Elinchrom Pro HD 500?

A: No You can't. The profoto b1 does

Q: 3. Which replacement flash bulb does this model take?

A: This is the flash tube for the ELC Pro https://bhpho.to/2K4rvJ7.

Q: 4. How to keep the Modeling Light on continuously for the Elinchrom ELC Pro HD 500?

A: To turn on the modeling lamp, you would press the button that looks like an image of the sun on the right-hand side of the back of the light fixture. By pressing the button, you can scroll through the options OFF, FREE, which would allow you to to set the modeling lamp output to whichever setting you prefer, and PROP, which would set the output of the modeling lamp proportional to the output of the flash tube. The modeling lamp is designed to shut off momentarily when you trigger the strobe. However, it can be set to also dim temporarily when the flash is triggered, then return to full output power if you have VFC (Visual Flash Confirmation) set on the monolight. Also note that the modeling lamp is designed to switch off automatically at high internal temperatures due to the modeling light's overheat protection function. After cooling off, the halogen modeling lamp will switch back on automatically. Do note that this is a strobe unit, not a continuous light fixture

Q: 5. I have a chimera XXS soft box how do I attach it to this 500 Quadra head ?

A: The following speed ring is needed in order to mount the following system. Impact Speed Ring for Elinchrom EL and Impact EX BH #IMSRELI • MFR #SR-ELI https://www.bhphotovideo.com/c/product/884604-REG/impact_sr_eli_speed_ring_for_elinchrom_impact.html

Q: 6. Since they call this flash a moonlight, is there a battery inside that charges so that the unit can function unplugged?

A: No, but there is a third party battery pack that works with it.

Q: 7. The pay load of 509 hd head is 13.5kg and it has a maximum counter balance of 12 kg,so can i use ursa of 7.5 kg,cannon lens of 4 .5 kg and battery ,view finder of 2 kg,(total of 15 kg) ,on this head? Manfrotto repreaentative says it is compatable to upto 25 kg,plse reply,regards dr asok

A: The 509HD has a load capacity up to 29 pounds or 13.1kg. A total of 15kg is above the load capacity. You would need to look at the Manfrotto 526 instead, which has a load capacity of 35 lbs or 16kg.https://bhpho.to/2NbClNJ

Q: 8. Does this utilize an XLR port to connect?

A: No, the Senal SMH-500 have a 1/4" TRS connector.

Q: 9. Do I have to change the modeling light in order to use his unit in 220v ? Thanks folks

A: Yes; either change it or remove it.Multi-voltage auto-detection: 90-265VAC excluding modeling lamp

Q: 10. How long does this last in storage?

A: In stock solution it will last 5-10 years. When diluted it is only good for a day or two. I mix up just what I need and toss it after a single use.