Lighting designers looking for a low-profile and lightweight cyclorama wash or footlight fixture will be impressed with the Ovation CYC 3 FC Cyclorama Wash/Footlight Fixture from CHAUVET PROFESSIONAL, a sleek, discrete, and lightweight cyc fixture that delivers a wide smooth field of light with remarkable reach, well suited for theater, film, and broadcast production.

The Ovation CYC 3 FC features an advanced 16-bit color mixing system with a red, green, blue, amber, and lime LED engine that renders nearly any color with realism and saturation. Its virtual color wheel can color match popular gel colors and color temperature presets. The beam can be modified using the integrated kickstand and adjustable glare shield, which results in a flat, even field of light with excellent color mixing.

The fixture is convection cooled, allowing for silent operation, while the adjustable PWM can be configured to avoid the dreaded camera flicker. The unit can be controlled via DMX and RDM with nine personalities and nine channels (2, 4, 5, 8, 11, 13, 14, 16, and HSV). The Ovation CYC 3 FC includes power-thru via PowerCon connectors. A power cord and Omega bracket are included.

For Theater, Film & Broadcast    Full-Spectrum Hues with RGBAL LEDs    16-Bit Dimming, Master/Individual Colors    Integrated Kickstand    Adjustable Glare Shield    Virtual Color Wheel    Matches Popular Gels/Temperature Presets    RDM & DMX Control    Silent, Fan-Free Operation    Multi-Voltage AC, powerCON Pass-Through

• Low-profile and lightweight cyclorama wash or footlight fixture
• Display a full spectrum of hues with RGBAL LEDs for theatre, film, and production
• Theater-ready with 16-bit dimming of master dimmer and individual colors
• Beam modification with built-in “kickstand” and adjustable glare shield
• Flat, even field of light with superior color mixing
• Virtual Color wheel with color matched to popular gel colors and color temperature presets
• RDM (Remote Device Management) for added flexibility
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
• Silent operation for use in studio and theatre applications

Related Questions and Answers

Q: 1. Can I use Heico Perma Wash in the selinium toner bath?

A: Is this for prints or negatives?I would not recommend mixing both together. Dilute toner (1:29) following P-wash and a water wash has been used is the past for archival purposes, though recent research states that a color change must be visible to the emulsion to ensure archival permanence.

Q: 2. Does this fit the new Nikon Zf?

A: It is unlikely that the SmallRig L-Shape Grip for Nikon Z Fc (Black) will fit the Nikon Zf Mirrorless Camera.

Q: 3. What is the weight of the Procyc roll?

A: According to our records, the PC80-NS would weight about 10 lbs.

Q: 4. How do you use a battery to power the Dracast BoltRay LED400?

A: This unit is designed for AC wall power only.

Q: 5. I see there is a case for the frame but how do you store the Pro Matte Virtual Green Material?

A: We recommend storing the Pro Matte green screen material rolled around the outside of the cardboard core on which it comes shipped, and then placed inside the shipping box. Storing it inside the cardboard core could cause it to be rolled too tightly.

Q: 6. Is there a shelf life for the Eco Pro concentrate prior to mixing?

A: Unopened eco•pro Neutral Fixer and eco•pro Hypo Wash bottles should be kept in cool, dark conditions. The products have a virtually indefinite shelf life. Once opened, the concentrate should be kept in tightly closed glass, PET(PETE) or HDPE containers, and used within twelve months. For best results in small scale darkrooms, a large opened bottle should be divided into several small glass or polyethylene bottles filled to the top to minimize exposure to air. eco•pro Hypo Wash concentrate may form white crystals if it is stored in contact with air. If a significant amount of crystal forms, discard the solution and replace it with fresh stock. It is inadvisable to use eco•pro Hypo Wash which has crystallized, as the accelerated washing function is impaired even if the crystal is dissolved after dilution. eco•pro Neutral Fixer and eco•pro Hypo Wash working solution may be stored before and between uses, in a tightly closed glass, PET (PETE) or HDPE containers. Discard eco•pro Neutral Fixer when the processing capacity is reached. The processing capacity of eco•pro Neutral Fixer depends on the processing sequence being used. Processing capacity is indicated in the "Summary of recommended sequences" section for archival standards. Each liter of eco•pro Hypo Wash working solution (1+19) can process more than 50 8x10 prints. Discard eco•pro Hypo Wash working solution when capacity is reached, or it is stored for more than two weeks, to ensure archival washing quality. The archival processing capacity of eco•pro Neutral Fixer is much greater when the subsequent washing procedure incorporates treatment in eco•pro Hypo Wash. This is because the archival processing capacity is limited due to more fixing reaction byproducts formed in partially exhausted fixer. The byproducts are more difficult to wash out than the fixer itself, particularly from fiber based papers. The use of eco•pro Hypo Wash promotes the efficient removal of both fixer and fixing reaction byproducts from all photographic materials, thus increasing processing capacity of the fixer. eco•pro Neutral Fixer (concentrate) is a clear solution free of insoluble sediments. eco•pro Hypo Wash (concentrate) is a clear solution free of insoluble sediments, but it will develop white crystals if the solution is stored in contact with air (oxygen) for a prolonged period of time. When more than a few small crystals are formed, discard the solution.

Q: 7. Does this Commander work with the FL-900R directly? Or does it require an extra Receiver.

A: No, the Olympus FC-WR Wireless Radio Flash Commander will not work with the Olympus FL-900R Electronic Flash. The FC-WR has wireless radio communication, and the FL-900R only has wireless optical communication. Currently only the Olympus FL-700WR Electronic Flash would work with the FC-WR.

Q: 8. Can we somehow mount the cross bar for the Procyc onto a VariPole? What accessories would be needed?

A: This background is designed for use with Junior stands and comes with the adapters for them.

Q: 9. High output means what? How bright are these at 6 feet?What is the beam angle?How much does each light weigh?

A: The Boltray 400 should be roughly equivalent to around 280-300 Watts of hot tungsten/halogen light. Yes, the beam angle is 60. And the weight per light is about 3 pounds. // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.

Q: 10. Will FC-WR Wireless Radio Flash Commander work with the Olympus FL-90 & 600 flashes ? Jim

A: The commander is only directly compatible with the FL700-WR. If you wish to use the commander with the other flashes, you will need to get the FR-WR Flash Receiver.