The 11.8" long RP-A3 Fischer 102 3-Pin Male to 2-WayLEMO 2-Pin Female Cable from Hawk-Woods allows you to power two different devices from one single 24v output. Normally used in conjunction with the ARRI camera's 24v 3-pin Fischer output, this cable regulates the voltage to 12v via 2 x LEMO 2-pin outputs.

Regulated Output

Related Questions and Answers

Q: 1. Anyone used this cable to trigger a Hasselblad X1D ii remotely?

A: The Profoto Male 1/4" Phono to Male 3.5mm Miniphone Cable - 11.8" can be used to trigger a Hasselblad X1D ii remotely

Q: 2. Which Profoto Air Sync Cable (specific product/item #) do I need to purchase/require: to connect one of my Profoto Air Remote(#901031; non TTL, with 3.5mm miniphone plug for sync signal in/out) to one of my off-camera Canon 600EX-RT speedlight; to then trigger that Canon 600EX-RT speedlight (in non-optical, slave sync) to receive a nonTTL radio signal from one of my Profoto Air Remote TTL-C(#901039), which would be mounted in the hot shoe of one of my Canon 5DmkIII cameras?The result being: the triggering of both my off-camera Profoto B1 500 Air TTL (via the camera mounted Profoto Air Remote TTL-C) and the triggering of my off-camera Canon 600EX-RT speedlight (via cable connected Profoto Air Remote).Do I purchase/use one of the following Profoto Air Sync Cable:Profoto #103016 (1/4 phone male to 3.5mm miniphone male),orProfoto #103020 (male 3.5mm miniphone to male 3.5mm miniphone),or?Thank you for any help, or clarity on the Profoto product # required.Mary

A: Hi Mary Ann,You will need the Miniphone to Miniphone cable #103020.

Q: 3. will this work as a R/S cable for v-raptor with 3-pin fisher break outs?

A: The OCTAMAS gear 3.5mm TRRS to 3-Pin RS Trigger Cable (11.8") is not compatible with the RED V-Raptor.

Q: 4. What is the maximum load on these batteries?

A: Here are the full Specifications from Hawk-Woods Model:BP-98UX Type:BPU Weight:440g Size:9.2 x 3.9 x 7 cm Nominal Voltage:14.4v Wattage:98Wh Capacity:6.8Ah Current:5A Number of D-Taps:2

Q: 5. compatible with Sony a7r?

A: This product is compatible with a Sony A7r.

Q: 6. Is this compatible with the Nikon D5600? I need to be able to tether to lightroom :)

A: Yes, you can use this cable. You might want to also consider the Tether Tools JerkStopper as well: https://www.bhphotovideo.com/c/product/818591-REG/Tether_Tools_JS020_JerkStopper_Camera_Support.html This will also prevent the cable getting yanked accidentally.

Q: 7. So is this 7.2v or 8.4v output as per the picture?

A: The Hawk-Woods D-Tap Male to Sony A7S Dummy Battery MFR # LR-16 provides regulated 7.2v.

Q: 8. Does this provide power regulation when used with a V-Mount battery? I don't see a recommended voltage range in my MixPre-6 manual.

A: This will regulate power of an external battery to properly run the mixpre6.

Q: 9. What is the coiled length of the 13.8"-39.4" cable for this product?

A: The coiled length of the 13.8 to 39.4" version of the CAMVATE Male to Quad Female D-Tap Hub with Coiled Cable & USB/DC Outputs (11.8 to 29.5") would be 13.8".

Q: 10. is this work on Sony 7rm2

A: Yes, I used this with Sony A7R2