The Nakameguro Pure Silk Camera Strap from ObiJimmy has a length of 47.2" and is white with red, yellow, and green stripes. Made from 100% loom-woven silk with genuine Italian leather ends and fine-gauge, stainless steel connector split rings, this strap is compatible with almost any camera with steel lugs. It accommodates most analog SLRs, analog and digital rangefinders, and mirrorless camera bodies.

Suits Almost Any Camera with Steel Lugs    100% Woven Silk from Japan    Genuine Italian Leather Ends    Stainless Steel Connector Split Rings    Unique Sanada-Himo Pattern

• Length of the strap without leather tips is about 47.2"
• Leather ends add about 0.4-0.8" to the total strap length
• Width of the strap is about 0.6"
• 100% woven silk from Japan
• Genuine, Italian vegetable-tanned leather details
• Minimal design
• Fine-gauge, stainless steel connector split rings
• Unique, eye-catching Sanada-Himo pattern
• Camera strap threads may fray if they come in contact with sharp or abrasive objects
• Suitable for use on cameras with steel lugs
• Compatible with most SLRs, rangefinders, and mirrorless cameras

Related Questions and Answers

Q: 1. Is this long enough to fit a Sony A7RIII WITH the battery grip attached, or is the SpiderPro strap a better option?

A: Thank you Michael.. The SpiderLight HS is designed to accommodate both configurations (with/without grip) for all Mirrorless cameras, so no issues there. The Light HS comes with special adapters for the Mirroless bodies (attach to the neckstrap lug). Please just make sure you purchase direct (a href= http://spiderholster.com target= _blank spiderholster.com/a) as we have lately changed the SONY adpater to fit the A7R III.Please email us directly through a href= http://spiderholster.com target= _blank spiderholster.com/a for any more questions, etc.Many thanks,Spider Team

Q: 2. Does this slider comes with the head?

A: No. You need to buy.

Q: 3. Does this have a sleeve in which to insert a cross bar or must you clamp it to a crossbar or upright?

A: What is the diameter of the cardboard roll it's attached to? I want to make sure the rod I have fits through it.

Q: 4. will it work with the Oly OMD-EM1 iii?

A: Hi Steve.. As you my know, all OMD's have the tripod connection 14/20" thread very very close to the edge of the camera, which is not ideal (for any connection, not just hand straps). However, it is possible to connect the Spider Light HS to the bottom, but it is not perfect. For top connection, please loop the hand strap through the triangle (neck strap) connection point. Again, not perfect, but doable. Hope this helps, Spider Team

Q: 5. Does the printer come with any sticker paper to begin with?

A: The Canon IVY 2 Mini Photo Printer (Pure White), B&H # CAIVY2MPW, includes 1 x ZINK Photo Paper Pack (10 x Sheets & 1 x SMART SHEET).

Q: 6. Does it work with X100V, X-E3 or X-A7 ?

A: Yes it will work with X100V, X-E3 or X-A7 or any cmpact or mirrorless camera. All the strap requires is a tripod socket on bottom and an eyelet on the side. all adapters are included for a custom fit.

Q: 7. Is the Lite good for the Sony DSC RX 10 IV or is the regular one better?

A: The Spider Camera Holster SpiderPro Hand Strap V2 is recommended for the Sony RX10 IV camera. Please take a look at the following link: https://bhpho.to/3llEjhG

Q: 8. Does this item come with a honeycomb grid?

A: Yes, a fabric grid is included with the Neewer Parabolic Softbox (47.2").

Q: 9. Will this work with Canon M50 Mark II?

A: Yes. The unit offers hand strap loops that will allow it to adapt to the hand strap.

Q: 10. does this fit the komdo x body? or is it solely for the original Komodo

A: The Foama Carry-On Case for RED KOMODO (Yellow Insert) is exclusively for the RED Komodo camera. It will not fit the RED Komodo-X. The case below would be a good alternate for the Komodo-X. Pelican 1615AirTP Wheeled Hard Case with TrekPak Divider Insert System (Black) BH #PE1615ACTPB