The SS-801 from SoundSecure is a mic-level omnidirectional microphone designed for security applications. It connects directly to an IP camera's audio inputs to send audio over your network to go along with captured video. External power is not required for operation because the SS-801 is powered by the connected camera. This microphone will pick up audio from up to 12' away in all directions. The microphone's enclosure is designed for ceiling or wall installation with no exposed screws or connectors.

Omnidirectional Microphone    Compatible with Select IP Cameras    For Ceiling or Wall Installation    Picks Up Audio from 12' Away    No External Power Required    Indoor Use Only

Omnidirectional microphone with mic-level audio output

Connects directly into an IP camera

For indoor use only

-44 dB sensitivity (±2 dB)

50 Hz to 8 kHz frequency response

60 dB S/N ratio

Related Questions and Answers

Q: 1. does the mic work without the batteries with a recorder?

A: Unfortunately no. The battery in this microphone is required to power the microphone.

Q: 2. How would you use this with an iPhone 14 Pro?

A: To use the BOYA BY-M1DM Dual Omnidirectional Lavalier Microphone with an iPhone, you would require the Apple Lightning Headphone Adapter (BH #APLAADAP).

Q: 3. How do i convert 4 wire output to xlr

A: You can contact Bogen for a wiring diagram. You can reach Bogen by phone at 800-999-2809. Their business hours are 8:30 AM to 5:00 PM EST Monday through Friday.

Q: 4. Will this work with the c100 using the 3.5mm slot? Thanks

A: This mic will connect to the Canon EOS C100's 3.5mm Microphone Jack.

Q: 5. If I use two OLM-10 microphones connected to a single camcorder via a Y connector, will there be any feedback issues? I know that purchasing one OLM-20 will not result in feedback, but I would prefer to purchase two OLM-10 microphones if there is no feedback issues. Thanks!

A: Using a Y connection is NOT recommended. The results will probably result in an audio track that is very distorted or over-modulated. Use a small mixer: The Azden CAM-3 3-Channel Mic Mixer allows you to add and mix sound from three Azden wireless or hard wired microphone sources simultaneously.Input Connections: -------------------------Input 1 and 2: 3.5mm MonoInput 3: 3.5mm Stereo ------------------------Output Connectors: 1 x 3.5mm stereo

Q: 6. Is this mic compatible with a Sony Prosumer HDR-CX900 camera?

A: Yes it is. Plug and play.

Q: 7. Hangup clip included??

A: No, there is no hang-up clip included with the Astatic 611L Palmheld Omnidirectional Dynamic Microphone.

Q: 8. My application is a bird's nest 85' up a tree. I want to use this with an IP camera. Does the camera supply the needed voltage for this mic, or is an external power supply needed? The specs say the supply voltage is to be .8 to 4.5 VDC. Does

A: No external supply is needed it gets powered from the camera.

Q: 9. Does this product come with the appropriate connector to use it directly with Zoom H1 recorder?

A: I do not have a Zoom H1, but the Zoom states it has 3.5mm mic jack, and this mic has a 3.5mm plug that I have used on a Canon HG21 camcorder, Nikon D7100, and a Samsung Galaxy S4, so I bet it will work on the Zoom recorder as well.

Q: 10. what size and weight is the 801-7920-05 middle balance weight?

A: This weight is .25 pounds and designed specifically to work with the Merlin, Pilot and Zephyr from Steadicam.