This 24' Switched Cord for China Ball Overhead Lights from Alzo can be used as a spare or replacement for the switched lighting cable that came as part of the ALZO LED China Ball Overhead Light. The cable is white with a length of 24' and an on/off switch 6' from the plug end. It has a grounded 2-pin US plug, and an E26/E27 bulb socket on the other end. Two T-bar ceiling hooks are included for supporting the cord from ceiling frames.

Grounded US 2-Pin Plug    E26/E27 Lamp Socket    All White Design    24' Long, On/Off Switch 6' from Plug

110-240V

100W

SPT-2, 18AWG

Related Questions and Answers

Q: 1. Would this work with the Dracast Camlux Max Bicolor On-Camera Light?

A: Unfortunately, that power supply is not compatible. A suitable option is the Watson Pro 12V 2A Power Supply (2.1mm), B&H # WAPS12V2A21. https://bhpho.to/33OjJLI

Q: 2. Is this a breakaway frame, or one solid piece?

A: This frame will break down for transport or storage.

Q: 3. Would this work with my mm-bsm-8 binaural headphones and MixPre-3 II to enable use of the kashmir XLR preamps instead of the aux-in one?

A: No, the ALZO adapter will not work because the MM-BSM-8 binaural headphones require 1.5 to 10 VDC plug-in power and the XLR inputs on the MixPre-3 II can supply 48V phantom power which is way more than needed and will likely damage the mic. The mic is designed to be used with the 3.5mm stereo plug. We have not tested it with adapters to confirm whether there will be issues with phasing and/or noise created by using a Y-type adapter, but it is very possible that could happen. If did want to try using a stereo 3.5mm Y-cable, you would need to use two XLR adapters (one for each input) like the Rode VXLR+ (B&H # ROVXLRP) which has a built-in power converter that converts phantom power to plug-in power. For the Y-adapter, you can try the Hosa Technology Stereo 3.5mm Female to Dual Mono 3.5mm Male Airline Adapter (B&H #HOYCSMF2MMRA) which splits stereo to two individual mono outputs. Again, I do want to mention that we have not tested this setup to confirm whether it will work properly or if it will sound good. We recommend connecting the mic to a 3.5mm TRS input for the proper stereo imaging it was designed to create.

Q: 4. would this work with the Fuji xt3?

A: Yes this will fit the PC socket of the camera

Q: 5. Would this work with the Rode VideoMic NTG TRRS output (allowing you to record the signal in addition to the safety track separately) with any mixer with XLR inputs?

A: The adapter has a female 3.5mm TRS connector, so to avoid the possibility of any issues with compatibility, it would be better to use a TRS cable instead of the TRRS cable since the auto-sensing feature may not work properly when connecting to an adapter rather than directly to a mic input. For a standard TRS cable, you could use the Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable (B&H # ROSC2). As an easier solution, you can use a single Y-cable with 3.5mm TRS and left/right XLR connectors like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 3' (B&H # KOSMYCM2XM03) or Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y) or Hosa Technology Stereo Mini-Phone (3.5mm) Male to 2 XLR Male Y-Cable - 6.6' (B&H # HOYCSMM2XM6). All of the Y-cables are available in longer lengths. The single Y-cable ensures a proper left/right split and helps to avoid introducing noise into the signal.

Q: 6. Would this work with the PTZOptics PT20X-ZCAM?

A: Yes it is possible, however, we do not recommend it. This product is not designed for use with PTZ cameras.

Q: 7. What mounting hole does this have?

A: Hello Nicholas, the Drum Light attaches to a 5/8 in stud, a standard baby pin socket.

Q: 8. Is this mount compatible with the armrest on a powered wheelchair? Thanks!

A: I would like to this this will fit, but here is a direct quote from the the manufacture. We understand that there are many makes and models of wheelchairs and there may be additional parts required for the perfect camera mount solution for your chair. We have always provided the extra hardware required at minimal additional cost. Please contact us by phone so that we can solve your mounting problem. Phone 800-582-7009 .

Q: 9. does it have to be mounted on a stud because I need the camera in a specific place? Its a light camera.

A: Hi, no it does not need to be mounted to a wall stud, but you do need to make sure to use appropriate anchors and that it is mounted securely.

Q: 10. Is the ALZO Overhead drum light dimmable?

A: Unfortunately, this fixture is not dimmable since it uses self-ballasted fluorescent lamps.