Stacking Curved Monitors

Aruba 3810m 4-port Stacking Module

Product Code: ga123917
Availability: In Stock

$4,317.00 $6,907.20

Qty

13 reviews Write a review

Description
Reviews (13)

The 3810M 4-port Stacking Module is designed to be installed into compatible Aruba 3810M series network switches.

For Aruba 3810M Switches 4 x Stacking Links

General
Compatibility	Aruba 3810M
Connector	4 x Stacking
Dimensions	5.85 x 3.38 x 1.03" / 14.86 x 8.59 x 2.62 cm
Weight	9.17 oz / 0.26 kg

Related Questions and Answers

Q: 1. How wide can the arms extend to the sides. I'm trying to mount the monitors so they flank the side of a 27 in iMac? Thanks

A: 25 from the center on each side.

Q: 2. Have a roll-top desk with a 2.5” cable routing hole near the back. Wondering if the mounting clamp would fit through that hole. Surface is 3/4” thick. Also how much room would be needed behind the clamp?

A: No. The mounting clamp will not fit through a 2.5" hole. On the room behind the clamp- depending on the position of the monitor screens; leaving 1-2" would be ok.

Q: 3. I can't understand the decription. But if I have two 27 monitors, will this fit?

A: I have two Dell Professional P2714H ? 27 Monitors on mine and it works well.

Q: 4. Can the stand be mounted to the desk by screws and/or bolts or is clamping it on the only way to mount it to a desk or table?

A: You can clamp it or you can cut a hole into the desk and install it that way.

Q: 5. By it saying it supports two displays up to 40”. Is that two 40” can be stacked above each other that each are 40”?

A: The Ergotron LX Dual Desk Mount Stacking Arm for Displays up to 40" (Matte Black), BH #ER45509224, will accommodate two stacked 40" displays.

Q: 6. Does it come with the mounting hardware to set it up firmly on the desk?

A: Yes it comes with all the necessary Hardware yes it comes with all the necessary Hardware I had someone install it but it was not a difficult installation probably could have done it myself and I think it's an excellent piece of equipment I would highly recommend it.

Q: 7. Will 28 size monitors fit on this?

A: Yes 2 28 monitors will fit, but anything larger will require a extension arm. I have a wide screen 34 side by side with a 27 using a pair of extension arms. These mounts are extremely sturdy. I'm very satisfied with my purchase.

Q: 8. Can this work with dual Apple Pro Display XDR?

A: The mount is designed to accommodate displays up to 24".

Q: 9. does it include the lapotop stand?

A: Yes it does!

Q: 10. can this be mounted to an Ergotron stand up desk?

A: Yes however my desk was a bit older so I had to drill new holes and buy longer bolts. It does work well with those mods.

GeoNikon	17/09/2024
I purchased the PowerMC2 for use with an Einstein 640 light. I plugged it into the unit, set it up using the menu on the Einstein and went to work. I connected seamlessly with the TT1/CC3 combo. I could easily adjust output from my camera in both indoor and outdoor settings. Works great. 5

Big Bruno	01/09/2024
I use the PowerMC2 with my Einstein strobes and Sekonic light meter. It pops the strobes with a touch of a button...all wireless. Very cool! 5

Jenifer C.	28/08/2024
It just works with my Einstein every time!! Love it! 5

David	27/08/2024
Really like my new pocket wizard PowerMC2 to use on the Einstein. I have been using the alien bees for years and needed 1 new flash so thought I would get it for the extra features. Just remember to do a firmware update on any of your pocket wizard transmitters before using. Its easy to do and will possibly save you some headaches. Have fun. 5

J P	22/08/2024
It's basically a plug and play solution to using your Pocketwizard TT's to control the light output of your Einsteins. Start out close and dial it in without leaving the camera. 5

Janet	09/07/2024
The MC2, in my humble opinion, that works with the PocketWizard system on Paul C. Buff Einsteins is way more intuitive and far easier to use than the Cyber Commander. The MC2 itself has a cover over the delicate prongs that the PCB units do not have and makes storage a lot easier and safer. But seriously, B&H in all of the $1000s I've spent at your store, this was without doubt the worst packaging I've ever seen from your shipping department. Usually the items I order are very well protected from the ravages of shipping. Not so this little module. Everything looked as if it had been run over by a tire. I was worried that with the package so crushed and no padding around the unit that it might have suffered. However, the unit seems to work fine; and I'm very glad to be the proud owner/user. 5

icemanx62	24/06/2024
Amazing when combined with AC3 Zone Contorller and Paul C. Buff's Einstein flash units. 5

Geo	22/06/2024
It triggers my Einstein with problems. I like that this new unit came with the usb cover, unlike the previous versions sold by Paul Buff. 5

Warrior Priest	27/05/2024
I purchased the PocketWizard PowerMC2 due to my recent purchase of my 2nd Paul C. Buff Einstein 640. Like with my first Einstein 640 I purchased The PowerMC2 for reliability knowing that it will trigger my strobes each and every time. PocketWizard has yet to disappoint me. 5

Lee Photo	12/05/2024
These work wonders with the Einstein's. I use the PW Mini TT1 and the ACC adapter on my camera and have full control of the Einstein's plus other lights using the PW Flex TT5. Wasn't sure whether to get more Plus 3's for flexibility or the PowerMC2, but glad I went with the MC2. I plan to keep these receivers and my Einstein's for a long time because combined they really perform well. 5