The black Whirlwind Inline Male XLR Connector is for designed cable mounting and features gold inserts. It provides strain relief and has a unique labeling area.

Gold Contacts    Black Strain Relief    Labeling Area

Related Questions and Answers

Q: 1. B&H has Neutrik NC7FXB described as a 7-pole 3-pin connector. The photo shows a 3-pin connector. Is that correct? Or is it 7 pins?

A: That is correct, this is a 3-Pin Female XLR Connector. It has 7 contact points inside it, which is what 7-pole means.

Q: 2. Does the 25' length include the "fan-out" portions at each end, or is it just the bundled portion? IOTW, what is the total length from a male connector to its corresponding female connector?

A: The Whirlwind MT-4-F-M-25 Medusa Multitrack Series Snake is 25 feet total length from end to end, including the fan-out portions on each end.

Q: 3. How long are the individual channel pigtails on each end of the bundled cable?

A: The distance from the start of the fan to the end is 2.5'.

Q: 4. Neutrik NC4MX-B 4-Pin XLR Male Connector will these fit canon xa20

A: If you're looking to plug a mic into the hot shoe inputs, you'll need a three pin version.

Q: 5. Does the stated length (10') include the fan length, or is the male-xlr to female-xlr length 14' (assuming each fan is 2')?

A: Yes it includes the connectors total legnth

Q: 6. Will this work with the new Blackmagic Design Studio Camera 4K Pro ?

A: Yes

Q: 7. Does this have a mircodot connector? Is it compatible with DPA lavs?

A: This XLR adapter does not have a microdot connector, so it would not be compatible with DPA microphones. The appropriate adapter is the DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip, BH #DPDAD6001BC

Q: 8. Will this work with the Blackmagic ATEM Camera Converter?

A: I'm sorry, but this Eartec headset will not be compatible with the Blackmagic ATEM Camera Converter. These would be similar options you could consider instead: https://bhpho.to/3BYboob , https://bhpho.to/3SsFuqQ

Q: 9. will this work with a walkie talkie?

A: Yes but for the Kenwood 2-Pin Radios only.

Q: 10. I see the box is phantom powered, but how does it pass 48v to condenser mics? If so, can 48v be turned off for use with dynamic mics?

A: This unit is made to power the Sennheiser MAS-1 button pecifically, to bring power to it and make it programmable for On, On/Off, PTT, and PTM modes. The phantom power from the mixer would go to the connected condenser microphone in the chain and if you are using a dynamic microphone it will not be affected by the condenser power in the line.