Internal components combine within the Yamaha NS-2000A 3-Way Floorstanding Speaker to deliver tonal balance, a realistic sound image, and high-fidelity sound dynamics, which are all part of Yamaha's "True Sound" experience. The speaker is comprised of dual 6.5" cone woofers, a 3.25" dome midrange, and 1.25" tweeter. The result is 200W of peak power and a Hi-Fi sound that's engineered to be extremely realistic. Solid brass speaker connectors ensure a stable audio signal, and the premium high-gloss piano black finish makes the NS-2000A fit into most any décor.

3-Way Bass-Reflex Speaker Design    2 x 6.5" Cone Woofers    1 x 1.25" Dome Tweeter & 3.25" Midrange    200W of Peak Power    34 Hz to 65 kHz Frequency Response    6-Ohm Impedance    ZYLON & Spruce Driver Construction    R.S. Chambers & Acoustic Absorber Tubes    Solid-Brass Speaker Connectors    High-Gloss Grand Piano Finish

Hear your music like never before, as the NS-2000A works to accurately reproduce specific elements of songs, such as individual instruments and vocals. This level of accuracy allows you to experience your music the way the artist intended. In order to perfect this resolution, every driver in the NS-2000A uses a blend of ZYLON for optimized sound velocity and minimal internal dispersion, and spruce, which is used in the soundboard of their grand pianos, resulting in a faithful tone across the entire audio spectrum for a richer aural experience.

The sound image of your music is represented in the reproduced soundstage by the speaker, and the NS-2000A is made to make you feel like you're in the room with the artist as they play. Using various technologies to deliver delicate nuance and proper instrument and vocal placement and spacing. With Resonance Suppression (R.S.) chambers mounted on the back of the tweeter and midrange drivers, two specially shaped tubes cancel out unwanted resonance. In addition, patented Acoustic Absorber resonator tubes work to eliminate standing waves. These are used in place of conventional sound-absorbing material, which can muddy music reproduction, as these technologies work to gain the benefits of resonance control and audio fidelity.

Utilizing laser vibrometers that are normally used in musical instrument R&D, as well as Finite Element Method (FEM) analysis in the construction of the NS-2000A, Yamaha effectively controls resonance to properly express the contrast between the stillness and motion of your music. This ultimately delivers complex and accurate sound dynamics when listening to your favorite music.

To further assist in reproducing seamless aural performance with the NS-2000A, Yamaha adopted high-quality internal components for the crossover circuit. In addition to a huge woofer coil, Yamaha uses an MCap SUPREME Classic audio capacitor made by Mundorf of Germany.

Cut from pure brass, the speaker terminals on the NS-2000A are large, screw-type terminals that are made to comfortably fit your fingers for effortless tightening for a firm connection and optimal signal integrity.

The exterior of the NS-2000A speaks to the level of audiophile-level internal components. The solid cabinet construction is covered in Yamaha's signature gloss finish that is the same as that found on their impressive grand pianos. More than a simple speaker, the NS-2000A is a stylish piece of furniture that is made to integrate with decors of a heightened aesthetic.

• 3-way bass-reflex speaker design
• 2 x 6.5" cone woofers
• 1 x 3.25" dome midrange driver
• 1 x 1.25" dome tweeter
• 200W of peak power
• 6-ohm impedance
• 4 x floor spikes for carpeted rooms
• Removable front grille

Related Questions and Answers

Q: 1. Will this work with Apple Profile Display?

A: The Yamaha NS-SW100 10" 100W Subwoofer (Black) BH #YANSSW100BL is designed to work from a dedicated subwoofer output terminal.

Q: 2. can this subwoofer be used with the yamaha stage pas 600i?

A: No it cannot be used with Yamaha PA equipment.

Q: 3. Yamaha NS-SW100 - what are the dimensions?

A: The Yamaha NS-SW100 10" 100W Subwoofer (Black) BH #YANSSW100BL is 13.8 x 13.9 x 16.1".

Q: 4. Can i use karaoko

A: These are not PA speakers and so they are not designed for karaoke use.

Q: 5. Hello, does the sub works with 240 volts?

A: The Yamaha NS-SW100 10" 100W Subwoofer works in 120 VAC, 60 Hz only.

Q: 6. Do these speakers need an amp? If so, which would you recommend?

A: Yes, they need an amplifier. I have mine connected to the Sony amp which drives our home entertainment system. I didn't purchase anything extra or special for the speakers.

Q: 7. Will this work with the Yamaha A-S501 amp?

A: Yes the Yamaha A-S501 amplifier has a subwoofer output for direct compatibility with the Yamaha NS-SW100 subwoofer.

Q: 8. Does this subwoofer have feet? If so, what are the dimensions? (I want to know if it will fit on my Auray ISO-SUB Subwoofer Isolation Stabilizer) Thanks in advance!

A: Yes the Yamaha NS-SW100 has feet. Yes the Yamaha NS-SW100 will fit onto the Auray ISO-SUB Subwoofer Isolation Stabilizer.

Q: 9. Will this work with my Pioneer component audio amplifier ? In case it matters, I also have a Marantz media player. Thanks, Roger

A: As other said, Yes. It should work with any RCA Preamp connection.

Q: 10. Will this work with a soundbar? Looking to replace the subwoofer for my Soundblaster Katana X

A: If your soundbar uses a standard RCA style LFE connection this will work.