Support heavier gear with the xx-large, black B300 Series Heavy-Duty Belt from Kinesis. The outer surface of this belt is made from 5000-denier DuPont Cordura plus nylon fabric, while the inner surface is made from a soft, breathable, foam-backed knit fabric called SuperKnit. This belt features bi-laminate foam which increases comfort when carrying heavy loads. This 20mm bi-laminate foam features 10mm of stiffer, closed-cell foam and 10mm of softer, open-cell foam. The softer foam is on the interior of the belt, maximizing comfort. This belt is designed to be worn comfortably over streetwear and is cut with extra webbing to fit over winter apparel.

Sizing tip: Select the largest size you can wear to maximize the attachment points. However, if between sizes, size down as belts can be more easily adjusted larger than smaller.

Unisex Sizing    Outer Surface Made from DuPont Cordura    Thick 20mm Bi-Laminate Foam Padding    Inner Surface Has Foam-Backed Fabric    2" Wide Adjustable Buckle    Conically Cut for a Comfortable Fit    Fits over Streetwear and Winter Apparel    Anti-Theft Hook-and-Loop Strap    Two B501 2" Sliders

• Optimum fit for those with waists measuring 48-54" and fits up to 64"
  • Eleven attachment points or room for ten single-wide pouches, five double-wide pouches, or other combinations
  • Kinesis attachment methods keep pouches stationary
  • Slots between the uniloops allow for attaching Kinesis Attachment Tab System or KATS-style pouches
  • Strong rectangular uniloops on the belt attach Kinesis TwinBuckle style pouches
  • Attach one metal slider buckle to one uniloop and the other buckle to another uniloop, skipping loops as needed for double- or triple-wide pouches
  • Special uniloop in the middle of the pouch allows for attaching the belt to your long lens cases or a backpack
  • Special pockets built-in for connecting the aluminum staves of a Kinesis backpack
  • Belt buckle can be worn in the rear, freeing up space on the front for attachments
    • Strap keeper holds web ends in place
    • Metal sliders fix position of the buckle
      • Small B516 hook-and-loop strap is designed to prevent slashing and grabbing of your belt while you are wearing it
      • Simply slip the strap in between the buckle slots and back onto itself

        Related Questions and Answers

        Q: 1. Will a Fujifilm 150-600mm with reversed lens hood fit in this case?

        A: Kinesis E340 X-Large Lens Pouch (Black) only fits the FUJIFILM XF 150-600mm f/5.6-8 R LM OIS WR Lens without the tripod collard foot and the lens hood. The lenshood is 12.5cm wide.

        Q: 2. Does this pouch come with a carrying strap?

        A: A strap is not included with this case.

        Q: 3. Is there a pocket to stow a lens cloth?

        A: Unfortunately, the Kinesis E584 XX-Large Lens Pouch I for Nikon 300mm f/2.8/Nikon 200-500mm f/5.6 would lack a pocket to stow a lens cloth.

        Q: 4. Will it fit a Nikon d500 and the 200-500mm lens?

        A: It will fit the lens by itself not with the camera attached

        Q: 5. do this case fit Nikon z 180 mm to 600 mm lens?

        A: Unfortunately, the Kinesis E584 XX-Large Lens Pouch does not fit well the Nikon NIKKOR Z 180-600mm f/5.6-6.3 VR Lens. It would have to be slightly longer to fit the lens well with the lens hood.

        Q: 6. Will it fit the 200-500 lens with its bracket still attached?

        A: Yes the Kinesis E584 XX-Large Lens Pouch I for Nikon 300mm f/2.8/Nikon 200-500mm f/5.6 will fit the lens with the lens foot attached.

        Q: 7. what are the inside measurements of the bag?

        A: The inside measurements are 12 long and 5 wide, and the Nikon 200-500mm with a hood fits nicely in that bag!!

        Q: 8. Does a Nikon Z 180-600 with reverse attached lens hood fit inside this pouch?

        A: Kinesis E340 X-Large Lens Pouch (Black) interrior dimensions wil fit the lens, unfortunately the lens hood diameter is wider than the case (5 inches) and you wouldn't be able to attached to your lens.

        Q: 9. Is this a good choice for the Fujinon XF 100-400?

        A: Yes, this pouch could be used to house a Fuji XF 100-400 lens.

        Q: 10. Will this fit the Canon EF 400 f/4 DO lens with a 1.4 X extender attached?

        A: Yes, the Canon EF 400mm f/4 DO IS II USM Lens paired with the Canon Extender EF 1.4X III would be compatible for use inside the Kinesis E660 XX-Large Lens Pouch II.