The Energizer ENF-600N Digital TTL Flash is an automatic shoe-mounted flash unit compatible with Nikon cameras with i-TTL functionality. With a guide number of 148' at ISO 100 and 105mm this unit is quite powerful and will easily illuminate your scene. It features a zoom range from 24 to 105mm along with the ability to tilt up to 90° and swivel 270°. Additionally, the flash head includes a built-in diffuser for softening and customizing the light to your needs.

During shooting, the ENF-600N has multiple creative modes for achieving specific effects. These include front and rear curtain sync modes along with a red-eye reduction mode. This can all be accessed with the rear LCD screen. Wireless master and slave TTL functionality is available for control over multiple off camera flashes from the camera-mounted unit.

This unit attaches by using a twist-lock shoe mount and it runs on 4 AA batteries which provide a recycle time of 0.5-9 seconds. It also includes a flash stand for off-camera operation and has slow, 1st and 2nd curtain sync modes

Compatible with Nikon i-TTL    Guide Number: 148' at ISO 100 and 105mm    Zoom Range: 24-105mm    Tilts Upward 90°    Rotates Right 90° & Left 180°    Wireless Master/Slave TTL Functionality    Recycle Time: 0.5-9 Seconds    Slow, 1st & 2nd Curtain Sync    Runs on 4 AA Batteries

Related Questions and Answers

Q: 1. Will this work with the sony a-35?

A: No it wont works just for Sony A77II, A7Rii, A7R, A58, A99, ilce6000l

Q: 2. This appears to be a universal flash cord connection. Is this correct? I'm interested because neither Fuji nor Vello have a Fuji-compatible cord.

A: There is no compatibility list for this product; reading reviews of products is always recommended.

Q: 3. I received this item for Christmas and it make a high pitch squealing sound...is this normal??

A: Yes, it is common for the capacitor in flashes to make a high pitch sound during use.

Q: 4. This flash works wirelessly with the sony camera A77 M2?

A: Yes, it will with the X1T trigger.

Q: 5. Will this flash perform high speed sync with the Nikon D90 ?

A: No, this flash does not support high speed sync feature unfortunately.

Q: 6. The directions that came with my flash do not address how to use the ISO or F/stop functions, mode only changes the power factor. Is there a set of online instructions?

A: The ISO and f/stop are set from the camera and are not adjusted on the flash. You can see with those keys on the flash what the settings are but again it is changed from the camera.

Q: 7. Hi! Will this cable work with a Leica Q3?

A: The Energizer Multi-Fit TTL Flash Cord for Select Digital Cameras could be used on the Leica Q3 Digital Camera as a manual center pin flash trigger. It would not operate with TTL.

Q: 8. Does this work with the Sony a7 iii?

A: confirmed to work on the A7iii. i have both.

Q: 9. Does this product allow for the firing of 2 flashes (or one flash and one radio transmitter) at the same time?

A: Whereas most off-shoe cables are designed to allow you to trigger external flash off-camera, as the connector on the hot shoe normally occupies the hot shoe, the Energizer Multi-Fit TTL Flash Cord for Select Digital Cameras would allow you to trigger one flash off-camera connected via the off-shoe cable, while still leaving a hot shoe on the camera's connector for an on-camera fill light. Personally, I would not recommend using both a flash and a radio remote with this cable, as radio triggers typically have slightly different sync timings compared to on-camera flashes. As the off-camera flash is still technically connected via the cable, it is possible the flash on the cable would still be using the camera's sync timing, while flashes triggered by a remote may have a slight delay, resulting in improperly exposed images. While the manufacturer does not cover the use of a flash and a radio remote, if you wish to purchase and test your setup, you may, and if it does not work, you would have until the end of the Return Policy to return the unit for an exchange or a refund.

Q: 10. I have a SONY A58 digital camera. Does this flash fit for it?

A: You would need to use an adapter such as the Sony Multi-Interface Shoe Adapter in order to mount the Energizer ENF-600S Digital TTL Flash for Sony/Minolta Cameras on the Sony A58.