Efficient and durable, the Vertex GX-1000W 80-PLUS Gold PCIE5 Modular Power Supply from SeaSonic delivers consistent power to your system while supporting graphics cards and other resource-demanding components. Airflow is increased thanks to the power supply's fully modular cable setup, enabling storage of unused cables outside of your computer.

The power supply is cooled by a 135mm fan and features the SeaSonic Hybrid Silent Fan Control, which allows you to control the speed of the fan depending on the system load with the press of a button located on the back of the power supply by the power switch. This PSU features three PCIe connectors for GPUs, in addition to eighteen SATA connectors and five Molex 4-pin peripheral connectors. A Molex to FDD adapter is included with this power supply.

1000W Single +12V Rail    135mm Cooling Fan    Intel ATX12V    1 x PCIe 5.0 Connector    3 x PCIe Connectors    18 x SATA Connectors    3 x 4-Pin Connectors    Fully Modular Cables    SeaSonic Hybrid Silent Fan Control

This 1000W power supply meets ATX 3.0 design standards and its PCIe 5.0 connector allows for easy connectivity with wide range of powerful components, such as NVIDIA's GeForce RTX 40 series graphics cards.

SeaSonic's patented, advanced three-phased thermal control achieves an optimal balance between silence and cooling. This Hybrid Silent Fan Control functions in three operational stages: Fanless Mode, Silent Mode, and Cooling Mode.

High-performance Fluid Dynamic Bearing (FDB) fans are designed to take advantage of the impact absorbance effects of oil. They are extremely reliable and generate considerably less operating noise and heat than ball bearing fans. The lubrication of the bearing surface reduces friction and vibration and therefore lowers overall power consumption. Due to the effortless, quieter rotations and its robust construction, this reliable fan technology also greatly increases the lifespan of the fan. When the fan shaft rotates, high-pressure oil drifts along the grooves of the bearing sleeve to generate a thin layer of lubrication between the bearing faces. As the speed increases, so does the dynamic oil pressure and the shaft is lifted from the bearing to create smooth, effortless rotations. The herringbone shape of the grooves helps to efficiently channel the lubricant and avert leakage.

Related Questions and Answers

Q: 1. will this charge a anton Bauer Titan 150 gold mount battery?

A: Anton/Bauer batteries should only be charged using Anton/Bauer charging solutions. Instead of the Core SWX Cube Plus 120W Power Supply (Gold Mount), please use the Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount), B&H # ANGM2DGMC.

Q: 2. Is the 12V output compatible with 2.5mm male input cables?

A: We do not have information saying so. However it is our opinion that this is an unlisted industry standard and has a 12VDC and 2.5mm connection.

Q: 3. What is a typical application for this amplifier? Is it normally used as an audio amplifier?

A: The Bogen V150 is a mono mixer/amplifier generally used in commercial installations such as retail/office applications. It can support up to 8 input sources of various types using optional input modules and outputs to 70 volt speaker systems as well as low impedance 4 or 8 ohm applications.

Q: 4. What is its weight? And, why the non-functioning D-tap?

A: Hello,This adapter weighs slightly more than half a pound. The design for these plates has recently changed, and the vestigial D-Tap output has been removed. I apologize for the inaccurate photos; once our next order of plates arrives, we will be taking new pictures of the updated plates to confirm the outputs on the new design, and sending them to B&H to update this product page as well.

Q: 5. does this system allow you to charge your Gold Mount battery before your shoot via wall plug? or would I need to buy a Gold Mount Battery Charger separate?

A: This does not charge your batteries. You would need an additional charger.

Q: 6. In what country this inverter is made? Thanks

A: The WAGAN Pure Line 1000W Power Inverter is made in China.

Q: 7. Does this come with alligator-clip cords to connect to a car battery, and a power-outlet connector?

A: Yes, the SlimLine 1000W 12 VDC to 115 VAC Power Inverter does come with a power cable and a pair of battery lead wires that are approximately 3-feet long and are rated at 6 AWG.

Q: 8. do you have to have a special module for tel intercom?

A: thank you for your question. To connect tel intercom you would need to purchase the BH# BOTEL1S Bogen Communications TEL1S Telephone Input Module.

Q: 9. Will there be a model with gold mount on both sides?

A: As for December 2022, the Tilta Power Supply Module for DJI Video Transmitter (BH #TIGADVTAB • MFR #TGA-DVT-AB) only comes with the gold mount on one side. It's possible in the future that Tilta will release a model with gold mount on both sides, but we haven't heard anything about this being in the works.

Q: 10. Is it possible to provide power to the module via the Anton Bauer P-Tap Charger that's plugged into the wall?

A: Yes, you could use a Gold mount power supply with the edelkrone Power Module (Gold Mount). However, using batteries would be more cost effective. Gold Mount wall power supply idea: Anton/Bauer Tandem-70 On-Camera AC Power/Charger BH #ANT70