This 30' TRUE1 Female to Edison Male 15A Power Cable from ProCo Sound uses a genuine Neutrik powerCON TRUE1 TOP 15A female connector paired with a standard NEMA-15 3-pin grounded US male connector. It has a power rating of 15A/250V and three 12-gauge conductors to safely supply power to anything requiring a TRUE1 connection. It is made with a type SJ/SJOOW thermoset black CPE jacket that is sunlight, water, oil, and weather resistant while remaining flexible and durable. Each cable is individually tested for performance and quality.

30' True 1 poweCON Power Cable    PowerCON TRUE1 Female to NEMA 15 Male    15A, 250 VAC Capacity    12-Gauge Conductors    SJ/SJOOW Oil- & Weather-Resistant Cable

Related Questions and Answers

Q: 1. How does this differ from the VXLR+?

A: Both the VXLR+ and VXLR Pro are 3.5mm TRS female to XLR male adapters with a phantom power converter that can convert 12 to 48V phantom power down to 3 to 5V plug-in power. The VXLR Pro differs from the VXLR+ because it also provides a transformer-balanced output which preserves the signal quality and prevents it from degrading when using a long cable run.

Q: 2. What surge protection is ideal to use with this? Or is there a similar product with surge protection?

A: A similar product to the ProX 10-Outlet Rackmount Power Distributor that has surge protection onboard is the Pyle Pro PDBC70 19" Rackmountable Power Strip Surge Protector (BH #PYPDBC70): https://bhpho.to/3GWh305

Q: 3. Am I correct, when assuming that one could use a y-splitter and 2 of these to “symmetrize” the Sound Devices Mixpre 3/6 unbalanced trs outputs?

A: No, the VXLR Pro is not intended for use with a line level audio signal. It is intended for use with a microphone that has a 3.5mm TRS connector that requires plug-in power and enables connection to an XLR mic input that supplies phantom power and it will convert phantom power to plug-in power. It would certainly help to have more information about what type of device or input you will be connecting the line output from the MixPre-3 or 6 to. Since you are sending line level audio from a single 3.5mm TRS output and want to split it to two balanced XLR male connections, it sounds like what you need is a direct box like the Kopul SDI-PPC Stereo Multimedia Passive Direct Box (B&H # KOSDIPPC). This direct box has a stereo 3.5mm input and will allow you to split the output from the MixPre-3 or 6 to left and right balanced XLR outputs. Please contact us by phone or through live chat on the website if you would like further assistance.

Q: 4. How long is the power cord of the power strip?

A: 6-feet

Q: 5. Will this work with a Deity V.Lav mic plugged in to the XLR socket on a Zoom H6?

A: Yes, the VXLR Pro adapter will work with the Deity V.Lav. Deity recommends their D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DXLR) which provides the same type of conversions for the connector and voltage.

Q: 6. Can I use the VXLR Pro to connect a Roland CS-10EM Binaural Mic to XLR connectors capable of supplying phantom power?

A: Yes you can use the Roland CS-10EM with the Rode VXLR Pro.

Q: 7. Can someone describe what is connected to each 1/8 in. connection (tip. ring, sleeve) in terms of signal, power, and ground? (This would go a long way to answering compatibility questions.) Thanks.

A: Although a specific wiring diagram is not available for the input connection on the Saramonic C-XLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter, we can confirm that this adapter is compatible with microphones using the common "Sennheiser" wiring configuration, which Saramonic lavaliers also use. This adapter is not compatible for use with microphones wired for compatibility with Sony wireless transmitters.

Q: 8. Will it work with my Rode Rodelink filmmaker kit and my Zoom H6?

A: Yes it. will.

Q: 9. Does B&H sell a locking make 3.5trs to non-locking 3.5trs short cable, as this will be ideal for connecting this adapter to my preferred mic and maximizing connection integrity, at least on the adapter side. Thank you.

A: No. A locking 3.5mm male TRS to a "non-locking" 3.5mm female TRS would be as special order, made to order from a specialty shop, such as Whirlwind. B&H could order for you$$.....

Q: 10. Can the RODE VXLR Pro also be used to connect an unbalanced 3.5mm mic to the Phantom-Powered XLR connector?

A: No. It would need to be a 3.5mm TRS connection microphone that requires mic plugin power to be able to work with phantom power and the Rode VXLR Pro.