Designed for musicians, mobile DJs, and rental houses, the black Electro-Voice EVERSE 8 is a weatherized, battery-powered loudspeaker that features Bluetooth audio and control. With an IP43 rating, the EVERSE 8 is ready to play, rain or shine. The speaker provides 400W of power, doing so in a relatively lightweight, 16.8 lb package. With its 8" woofer and 1" titanium tweeter, the speaker delivers between 65 Hz to 18 kHz (-3 dB) at a maximum SPL of 121 dB.

On the rear, you'll find a pair of combo XLR-1/4" inputs for microphone or line-level signals as well as a 3.5mm aux input. A Bluetooth receiver allows you to stream audio from your favorite portable device. A free Bluetooth app provides wireless access to factory voicings, compression, EQ, and effects, allowing you to dial in your best sound from anywhere in the room. Pole-mount it into a subwoofer or speaker stand for a DJ set or lay it horizontal on the floor of a stage, where it can serve as a wedge for musicians as they perform. It also can be used as a kickback monitor for added versatility.

For Musicians, Mobile DJs, Rental Houses    8" Woofer + 1" Titanium Tweeter    100 x 100° Dispersion    65 Hz to 18 kHz Frequency Response    400W Power Rating    Combo XLR-1/4" Inputs + 3.5mm Aux Input    Lightweight at 16.8 lb

The EVERSE 8 battery pack will provide +6 hours of constant music playback at maximum output levels or over 12+ hours 95 dB SPL average. EVERSE 8 has integrated power-saving features to extend battery life when no signal is present. The 12 VDC jack on the EVERSE 8 speaker can be used to power a wireless microphone receiver like the Electro-Voice RE3 or R300.

The EVERSE 8 features an 8" woofer with SST port and a 1" titanium dome tweeter, which produces over 121 dB SPL max and frequency response from 50 Hz to 20 kHz (-10 dB). The 100 x 100° waveguide ensures even coverage across all frequencies. Two additional monitor angles (30 and 55°) ensure the right coverage and position for any situation.

The EVERSE 8 features Electro-Voice's intuitive QuickSmart DSP with single encoder interface for simple and quick setup. EVERSE 8 can be paired via Bluetooth to a mobile device with the QuickSmart Mobile app installed to provide easy remote control of all audio functions. The QuickSmart Mobile app allows pairing and grouping of up to 6 speakers, in any combination, including EVERSE 8, ELX200 powered family, and the EVOLVE family.

The EVERSE 8 features Bluetooth streaming, using the AptX-I-ID codec for high-quality stereo audio streaming with compatible devices. Two EVERSE 8 speakers can be paired for True Wireless Stereo (TWS), streaming from a mobile device.

The EVERSE 8 features a built-in 4-channel mixer with FX, EQ, automatic feedback suppression and ducking functions. The mixer includes two XLR-1/4" combo jacks, including 48V phantom power on input 1 (XLR) and Hi-Z compatibility on input 2 (TRS). The mixer also includes stereo Bluetooth, a 3.5mm aux input, and USB-C connector for charging your portable devices.

Related Questions and Answers

Q: 1. Can you dj with 4 of theses connect one to tws and then connect the rest with xlr output is this possible

A: Yes, in theory multiple units of the American Audio APX CS8 Powered Column PA System Mixer and Bluetooth could be chained together using its XLR output connection to feed the next speaker.

Q: 2. Will this fit for Rode Procaster? If not is there any suggestion that it's small like this one?

A: Yes, the On-Stage Pop Blocker for Electro-Voice RE20 and RE320 Microphones (Version 2) is compatible for use with the Rode Procaster Broadcast Microphone.

Q: 3. will this fit the ELX200?

A: Yes the Electro-Voice ASP-58 Adjustable Pole is compatible with ELX200 speakers.

Q: 4. What about security? Can anyone jump on the Bluetooth at anytime?

A: The Switchcraft 318BT Phantom-Powered Bluetooth Audio Receiver can stream audio from only one Bluetooth-enabled device at a time, but transmission over Bluetooth may not be secure.

Q: 5. Will this pop filter fit a Rode NT1000?

A: No, the On-Stage Pop Blocker for Electro-Voice RE20 and RE320 Microphones (Version 2) is not compatible for use with the RODE NT1000 Studio Condenser Microphone. The On-Stage Pop Blocker is designed specifically for the Electro-Voice RE20 and RE320 models, which are both front-address style microphones, while the NT1000 is a side-address microphone. You can use the Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and Booms (B&H # AUPFNY6), the 512 AUDIO Microphone Pop Filter with Gooseneck C-Clamp (B&H # 51512POP), the sE Electronics Dual Professional Pop Screen (B&H # SEDPP), or any similar pop filter which will cover the side of the microphone that picks up the sound.

Q: 6. Does this microphone need a windscreen for outdoor use? The item description suggests the windscreen is built-in.

A: Yes you will need a windscreen for outdoor use. Why listen back to the best take of the day and say oh i can wind noise, why didnt i just put the cover on in the first place .

Q: 7. Is the power rating of 100 watts continuous, RMS, or peak?

A: The 100W rating for the American Audio APX CS8 Powered Column PA System Mixer and Bluetooth (Black) is peak power.

Q: 8. Is the bluetooth a reciever or transmitter? If it is a receiver, can you split the stereo signal between the two channel controls? Thanks.

A: The Bluetooth feature on the PA6BT Powered Hot Spot Personal Monitor receives an audio signal that is transmitted wirelessly via Bluetooth from another device to playback audio from the paired device. The Bluetooth input is separate from the two wired analog input channels and you can not split the Bluetooth signal between the two wired channels. However, if the playback device you are using has a wired output in addition to Bluetooth, you can send the output from the device using a cable. Depending on the device, it may be possible to split the stereo signal with a Y-cable. Please contact us through live chat or by phone to provide more details so we can assist you further with your setup to determine what type of adapter you may need to use with your device for a wired connection.

Q: 9. Does the speaker emit any wireless signals if paring has not been done?

A: The American Audio APX CS8 has an AUX/BLUETOOTH switch so you can keep it toggled to AUX settings to avoid activating the bluetooth pairing on the speaker.

Q: 10. Does this fit the rode pod mic?

A: We recommend BH #ONPBPMJBHV2 for the Rode Podmic instead.