House your components in the sleek and stylish Lian Li LANCOOL 216 RGB Mid-Tower Case. Constructed from durable steel and featuring a transparent tempered glass side panel as well as a mesh front panel, custom builders can turn their next build into the centerpiece of their gaming room or office.

Designed to enhance your system's core foundation, the LANCOOL 216 supports Micro-ATX, Mini-ITX, ATX, and E-ATX motherboards, allowing you to pick the ideal motherboard of your choosing. Four 2.5" drive bays are split evenly between the PSU shroud and behind the motherboard while the drive cage supports two 2.5" or 3.5" solid-state and hard-disk drives. Seven expansion slots allow you to easily install a wide range of utility and graphics cards up to 15.4" long. Two 160mm ARGB fans are pre-installed on the front panel to provide ample cooling and offer vast illumination options and custom effects to make your system feel unique. The LANCOOL 216 also supports both liquid and air cooling capabilities, supporting radiators up to 360mm and CPU coolers up to 7.1" tall. Front I/O panel offers two USB-A 3.0 ports, a single USB-C port, as well as a 3.5mm combo audio jack for private enjoyment of your media and games.

Micro-ATX, Mini-ITX, ATX, E-ATX    Steel Frame & Tempered Glass Side Panel    4 x 2.5" Drive Bays    2 x 2.5/3.5" Combo Drive Bays    7 x Expansion Slots    2 x USB-A 3.0 | 1 x USB-C    2 x 160mm ARGB Fans    Supports GPUs up to 15.4" Long    Supports CPU Coolers up to 7.1" Tall    Liquid Cooling Supported

Providing adequate airflow to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud's side. The front mesh extends to the top for a continuous mesh panel.

The included 160mm ARGB fans feature two channels of LEDs that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3-pin header. Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.

The modular motherboard I/O allows users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems. Set higher, the motherboard leaves room above the PSU shroud for wider fans. When set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.

Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.

Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360mm radiator or 3x 120mm fans at the top.

The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.

The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.

The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, three large cable management straps can hold two different sets of cables. Three small clips are located along the rear side panel, ideal for cleanly routing CPU cables. Two additional cable management straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.

Related Questions and Answers

Q: 1. Does the non rgb version comes with a fan hub and switch to control fan speeds?

A: The Lian Li LANCOOL III Tower PC Case does not include a fan controller.

Q: 2. USB type-c cable for front panel included?

A: No, it would be a separate purchase.

Q: 3. Will a NZXT kraken z73 360mm fit in this case?

A: Yes, this case can fit multiple 360mm radiators

Q: 4. Can this case be inverted?

A: This case cannot be inverted.

Q: 5. Does it support 360mm aio cooler at the top and does it support e-atx?

A: Yes the case does supports 360mm AIO cooler top.

Q: 6. Can the PSU be mounted inside the left side of the case under the motherboard instead of its bay in the right side of the case? Also can the PSU bay be utilized by putting one of the provided hot swap drive cages in it?

A: Yes, the PSU can be mounted on the left side of the Lian Li O11 Dynamic XL Full Tower Case (White) BH #LIO11DXLWif you remove the drive cages from that area. Page 4 of the user guide shows the possible PSU locatons. https://www.bhphotovideo.com/lit_files/608201.pdf

Q: 7. Does this come with any fans?

A: This case doesn't come with fans.

Q: 8. Can the RGB lights on the fans be turned off leaving just the fans running? Building for wife who's sensitive to some lighting.

A: Yes, the RGB fans on the Lian Li LANCOOL II Mesh RGB Mid-Tower Case (White) BH #LILAN2MRW can be turned off.

Q: 9. DVD-RW Bays?

A: The Lian Li LANCOOL II Mesh Performance Mid-Tower Case (Black) BH #LILAN2MPX does not support optical drives, there are no 5.25'' bays or a door on the front.

Q: 10. How is the (Black, Type-C) BH #LILAN2MPX50 difference from (Black) BH #LILAN2MPX?

A: The LILAN2MPX50 has USB-C ports. The other does not.