The Choptones Bogie Trix 6L6 Rig Library from Overloud is a quality rig simulator and expansion library for the TH-U Rig Player. This rig library delivers the enormous flexibility and three channel power of the rack-mounted Mesa/Boogie Triaxis preamp, along with the smooth, punchy warmth of a 6L6 tube power amp, for loads of sonic versatility.

This rig library was captured with 13 varied microphones and 15 different cabinet and speaker combinations ranging from 2x12 to 4x12 cabinets and numerous revered speakers such as the Celestion V30, G12V Marshall Vintage, and Eminence Legend V12, for a total of 265 rigs. Three gain-enhancing pedals were also used in the capture from Mesa and MXR for even greater aggression and bite. Designed to be used in any version of TH-U that sports Overloud's Rig Player, a 3D amp simulator which makes it easy to reproduce accurate real-world rig models and tweak them to your desire, the Choptones Bogie Trix 6L6 is a great choice for players seeking the kind of wide ranging tone needed by professional musicians on stages all over the world.

Quality Rig Capture for TH-U Rig Player    Mesa/Boogie Triaxis V2 with 6L6 Amp    13 Mics, 15 Amp Combos, 265 Rigs Total    Three Gain-Boosting Pedals    3D Rig Simulation with Rig-to-Model Tech    Compatible with All Versions of TH-U

This rig library delivers one of the most complete and accurate captures of the Mesa/Boogie Triaxis V2 preamp ever. The Triaxis is a three-channel, rack-mounted preamp designed to provide guitarists with an extremely large array of tone options, being particularly popular on professional stages where the rack-mounted form factor and built-in MIDI compatibility allow a guitarist to instantly switch between many different preset tones without ever touching a knob.

This Triaxis was run through a tube power amp using 6L6 tubes, a classic valve design featured in decades of celebrated amplifiers, which imparts a nice, smooth, warm character to the output. The final combination was then fed through numerous combinations of cabinets and speakers to ensure you have the absolute maximum of options when dialing in your preferred Triaxis tone.

The Bogie Trix 6L6 rig library was captured using numerous cabinets and speakers for a wide variety of Mesa/Boogie flavors. The 15 cabinet and speaker combos include:

• Soldano 4x12 loaded with Eminence Legend V12
• Mesa/Boogie 4x12 loaded with Celestion V30, V-Type, G12EVH, and G12V Marshall Vintage
• EVH 5150III 4x12 loaded with Celestion G12EVH
• Marshall 4x12 loaded with Celestion G12M and G12T75
• Engl 4x12 loaded with Celestion V60
• Bogner 4x12 loaded with Celestion V30
• Custom Audio 4x12 loaded with Celestion Creamback 75
• Hughed & Kettner 4x12 loaded with Celestion G12M
• Krank 4x12 loaded with Eminence Texas Heat
• Mesa/Boogie 2x12 loaded with Celestion V30
• Marshall 2x12 loaded with Celestion V30
• Fender Bassman Cab

This rig library was created using an assortment of 13 different quality microphones for a range of IRs and tones to ensure accurate and flexible simulation. This list includes:

• Shure SM57 and a modded SM57
• Shure SM7
• Sennheiser MD421 and E906
• AKG C414
• Heil PR30
• Beyerdynamic M160 and M88
• Royer R121
• Audix i5
• Neumann U87 and KM84

Along with its many cab/speaker combos and mics, this rig library was captured using three guitar pedals for potent gain boosting and further sonic possibilities. This includes:

• Mesa Flux Drive
• Mesa Grid Slammer
• MXR Wylde OD

Related Questions and Answers

Q: 1. Why is there only one 15mm rod, and only on the LEFT side?

A: It's the design for the plate for this specific Tilta shoulder mount system.

Q: 2. is this rig good enough for sony pxw z80 camcorders?

A: Yes, the Tilta Lightweight Shoulder Rig (Black) would work fine with a Sony PXW-Z90 camcorder.

Q: 3. Can this rig hold a canon c500 mark ii (or c300 mark iii)? with cinema lenses. Mostly for documentary use.

A: Yes, The Canon C500 II or Canon C300 mk II would be supported when using the PolarPro Pivot Shoulder Rig System.

Q: 4. is this compatible with the sony a6700 ?

A: Yes, the Tilta Lightweight Shoulder Rig is compatible with the Sony a6700.

Q: 5. Hi! what is the max load it can take? thanks!

A: Tilta does not list a max supported weight. However, It would support weights that would be comfortable for shoulder mounting. 20-30lb rigs would be supported.

Q: 6. Would this work with the Sony FS5? It's small and lightweight but the description only specifies DSLR cameras.

A: This combination is unknown. That being said, if it is made to be solid, it might be a very good, very compact chest support for the FS5.

Q: 7. In plain everyday language what does this item do and when it is used?

A: This is a shoulder mount rig that works with virtually any camera and lens combo. It allows you to shoot with a camera on your shoulder and it gives you mounting points for accessories such as a follow focus and matte box.

Q: 8. Would this work well with a battery grip equipped camera such as a Canon T4i or 5D Mark IV?

A: While it would work with both cameras it would not be able to work with the cameras battery grip unless you remove the handle of the edelkrone Pocket Rig 3.

Q: 9. Rod spacing is not specified, But i stool want to know, is it 60mm? (15mm LWS Standard)

A: The PolarPro Pivot Shoulder Rig System follows the 15mm LWS(Light Weight Support) industry standard. The rods are 60mm apart on center.

Q: 10. Does it function without the 15mm rod section attached? As in can it be secured to the camera and a tripod plate without the 15mm rod "block" in the middle? The pictures seem to imply this might work, but there are no clear views. My use-case would rarely need the rods, but the shoulder support/belt clip could be useful for a lot of inconspicuous run and gun work.

A: Yes. The 15mm rods can be taken out of its places.