Power Amp 2 Channel

Peavey Ipr2 5000 2-channel Power Amp

Product Code: ga12496
Availability: In Stock

$2,999.97 $3,959.96

Qty

7 reviews Write a review

Description
Reviews (7)

The Peavey IPR2 5000 2-Channel Power Amp features an advanced design that makes it lightweight while increasing output power, reliability and thermal efficiency. This amplifier is designed with a resonant switch-mode power supply and a high-speed Class D topology that yields a high audio resolution and efficiency. Advanced technology and extensive protection circuitry allow for efficient operation under difficult loads and power conditions.

The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2Ω. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. This amp also features 2-channel independent fourth order Linkwitz-Riley crossovers and a variable-speed fan housed in a lightweight aluminum chassis. The amplifier’s high-efficiency design allows it to operate at very low temperatures without the need for massive heat sinks to cool.

Parameters
Rated Power	2ch x 2 Ω: 3,230 W 20ms repetitive burst / 2,530 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 1,985 W 20ms repetitive burst / 1,700 W 1% THD / 1,470 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,175 W 20ms repetitive burst / 1,025 W 1% THD / 880 W 0.15% THD, both channels driven @ 1 kHz
RMS Power	1 x 2,900 W at 2 Ω 1 x 1,780 W at 4 Ω 1 x 975 W at 8 Ω 2 x 2,525 W at 2 Ω 2 x 1,510 W at 4 Ω 2 x 890 W at 8 Ω
Minimum Load Impedance	2 Ω
RMS Voltage Swing	105 V (maximum)
Frequency Response	20 Hz to 22 kHz; +/- 0.5 dB at 1 W 20 Hz to 20 kHz 2ch x 2 Ω: <0.5% @ 2,250 W 20 Hz to 4 kHz, decreasing to 1,640 W @ 20 kHz, both channels driven 20 Hz to 20 kHz 2ch x 4 Ω: <0.15% @ 1,400 W 20 Hz to 10 kHz, decreasing to 1,350 W @ 20 kHz, both channels driven 20 Hz to 20 kHz 2ch x 8 Ω: <0.15% @ 860 W 20 Hz to 4 kHz, increasing to 1,000 W @ 20 kHz, both channels driven
CMRR	Input: > - 75 dB @ 1 kHz
Voltage Gain	x 40 (+32dB)
Crossover	100 Hz switchable 2nd order high pass and 3rd low pass per channel
Crosstalk	> -60 dB @ 1 kHz @ 700 W power @ 8 Ω
Hum and Noise	> -105 dB, "A" weighted referenced to rated power @ 4 Ω
Slew Rate	> 12 V / μs
Damping Factor	> 210:1 @ 20 Hz to 1 kHz @ 8 Ω
Input Sensitivity	1.95 V +/- 3% for 1 kHz 4 Ω rated power, 1.83 V +/- 3% for 1 kHz 2 Ω rated power
Input Impedance	20 kΩ, balanced and 10 kΩ, unbalanced
Current Draw	@ 1/8: 1,435 VA (890 W) @ 2 Ω, 920 VA (525 W) @ 4 Ω, 625 VA (335 W) @ 8 Ω @ 1/3: 3,050 VA (2,155 W) @ 2 Ω, 1,880 VA (1,200 W) @ 4 Ω, 1,200 VA (715 W) @ 8 Ω
Idle Consumption	195 VA, 90 W
Cooling	3 temperature-dependent variable speed fans
Controls	2 front-panel attenuators, crossover select switch for HPF, Normal and LPF
LED Indicators	5 LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection	Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors	Inputs: Dual combination 1/4" XLR Outputs: 2 x 1/4" thru, 1 x 2-pin & 1 x 4-pin twist-lock connector
Construction	0.062" (0.16 cm) thick aluminum
Dimensions	3.5 x 19.0 x 17.0" (9.0 x 48.3 x 43.2 cm) Handle: 0.6" (1.5 cm)
Weight	13.6 lb (6.2 kg) (without power cord)
Packaging Info
Package Weight	21 lb
Box Dimensions (LxWxH)	21.6 x 20.9 x 7.1"

2-channel independent, fourth-order Linkwitz-Riley crossovers

DDT protection for trouble-free operation into loads as low as 2 Ω

IPR Class D topology

Detented input controls

Combination XLR 1/4" inputs

4-pole twist lock output connectors

Lightweight design

Individual signal pass 1/4" jacks on each channel

LED illuminated

Standby, LED power present indication

Related Questions and Answers

Q: 1. How to work the effects?

A: The available effects are dialed in via labeled EFX orange-colored knobs located on the front panel under the red MON knobs. Please follow the link provided below for the instruction manual and full operating details:http://bit.ly/1K9VVT9

Q: 2. What type of battery is in this jump started? Is it a lithium ion or other? If the battery is dead, will it be able to be recharged?

A: The battery in the Noco Genius Boost 3000 is a rechargeable Lithium Ion battery. It works best when the car battery still has some charge. If the car battery is dead with no charge left at all, there is a manual override button which allows boosting, albeit without some of the safety features.

Q: 3. Can you plug in two of these into one laptop and then use 4 outputs for a live situation? specially looking at using albeton live to play tracks.

A: I own Two of these. I Just tried it and it wont work like that. they are two separate units.

Q: 4. Does it support 24bit/48khz?

A: It supports 44.1 or 48 khz at 16 bit.

Q: 5. how many watts per channel?

A: Rated Power: 2ch x 2 Ω: 3,230 W 20ms repetitive burst / 2,530 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 1,985 W 20ms repetitive burst / 1,700 W 1% THD / 1,470 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,175 W 20ms repetitive burst / 1,025 W 1% THD / 880 W 0.15% THD, both channels driven @ 1 kHz RMS Power 1 x 2,900 W at 2 Ω 1 x 1,780 W at 4 Ω 1 x 975 W at 8 Ω 2 x 2,525 W at 2 Ω 2 x 1,510 W at 4 Ω 2 x 890 W at 8 Ω Minimum Load Impedance 2 Ω

Q: 6. can I plug my computer via usb directly to my studio monitors? or do I still need a mixer in between the box and monitors?

A: This direct box would usually be used to go into an XLR mic input on a mixer, but Peavey does show a line level option, so it can be plugged directly into studio monitors.

Q: 7. What type of effects come with the amplifier

A: The Peavey PVi 8500 400W 8-Channel Mixer/Amplifier with FX and Bluetooth list of effects includes 3 different reverbs, Delay, Vocal Enhance, and Chrous.

Q: 8. Does it work with cubase?There is no comment about ASIO

A: This should work with any software that lets you choose the output device.

Q: 9. Is the subwoofer out frequency selectable?

A: It does not have a frequency variable sub out. Just a mono out feed to the sub.

Q: 10. What is the AC power range of this unit?

A: It is 120 VAC 60Hz only.