The TravelCoat for Nikon Z 600 f/4 VR TC from LensCoat is specifically designed to fit your lens and will protect it from damage and inclement conditions. This 3mm thick closed cell neoprene cover can be easily slid over your lens and secured with the hook-and-loop closure.

Protects from Damage    Custom-Tailored to Fit Your Lens    Closed-Cell Neoprene Construction    Hook-and-Loop Closure

Related Questions and Answers

Q: 1. Is this product actually waterproof?

A: LensCoat's RainCoat Pro uses a lightweight, waterproof, and breathable poly tricot material.

Q: 2. Does it work with the canon 600mm f4 lens and the canon r5 with the battery grip and gimbal head on tripod

A: Yes, the LensCoat RainCoat Pro (Realtree Max5) can accept a Canon EOS R5 with a battery grip and the Canon RF 600mm f/4 L IS USM Lens.

Q: 3. Will this fit the Nikon 200-500 Lens hood?

A: HiI cant say for certain but it fits the Canon 100-400 lens easilyfrank

Q: 4. Can this rain cover be used in conjunction with a Gimbal head that is mounted on my tripod?

A: I would say yes. I use a pan and tilt head not a gimbal and the rain coat works fine. The way it attaches leaves the lens foot and plate exposed.

Q: 5. Is there a way to use a camera flash (shoe mounted) with the lenscoat raincoat pro? I have canon film slr - eos 3 and canon speedlite 550 ex flash. thanks

A: Hi Sanjay, in reference to you question about the raincoat pro...it does not have an opening for the hotshow, but there are ways to shot with the raincoat on.One way would be to pull the raincoat around the flash. This would leave the flash exposed and a small portion of your camera on the back side of the flash.Another way would be to turn the faincoat so that the sleave is facing up and you could slide the sleave down over the flash and use the pullstring to cinch it on the flash so that only the end of the flash is exposed. This option should give you what you are looking for while keeping your equipment dry.Hope this helps.

Q: 6. what is the range of diameters of lenses on which it will fit? This is a critical spec which is unfortunately not mentioned.

A: Because of the way TheLensCoat TravelHood Zoom is built, it will fit on zoom lenses from approx 67mm up to approx 150mm diameter. When using this hood on all lenses, and especially smaller zoom lenses, it can cause vignetting at the wider angles of the zoom.

Q: 7. Will this product fit a Canon R6, w/100-500 RF Lens?

A: Yes, the LensCoat RainCoat Pro (Realtree Max4 camouflage) will work with the Canon EOS R6 and the RF 100-500mm lens.

Q: 8. Is it work for Sigma 150-600mm Sport version Len?

A: I use it on a 300 2:8 all I can say is check size it should fit if send it back I will say it's a great cover and beats the plastic ones are used to use

Q: 9. if filter pouch will hold 8 filters won't the pouch get kind of thick or fat when folded up?

A: When fully packed, the LensCoat FilterPouch 8 will be thicker when folded up, however, as this pouch is designed to fit this number of filters, there will not be any issues in folding the pouch completely.

Q: 10. will this work with a Canon 50mm f1.4 usm lens ( its 6 inches in length with hood and my eos -3 body attached and goes upto 7.5 inches if extension tubes are also added ) or will it be too big ? thanks

A: This raincoat is just too large. After purchase of this one I would not purchase another. I chose to use two large (quart) zip lock freezer bags. They were much tighter fitting, drier to use and you had full visibility of your camera and lens. The so called raincoat is a good idea but they need to go back to the drawing board.