Reduce the amount of light coming into your DJI Mavic 3 Classic drone camera lens with this ND16 Full Spectrum Neutral Density and True Color Polarizer Filter for DJI Mavic 3 Classic from NiSi. Ideal for cloudy to bright shooting conditions, this high-definition optical glass neutral density and polarizer filter decreases the amount of light that enters the lens by four stops and retains true color transmittance while ensuring precise stops. Treated with NiSi's own nano coating, the filter is easy to clean and waterproof, as water beads that build up will glide off naturally.

By reducing the amount of light entering the lens, the filter lengthens shutter speed, thus providing a more natural sense of motion and keeping optimal sharpness throughout. The polarizing aspects of the filter aid in reducing reflections and glare while increasing saturation. The sturdy but lightweight filter is built with aircraft-grade aluminum and is easy to attach and remove from the camera.

For DJI Mavic 3 Classic    Ideal for Cloudy to Bright Conditions    4 Stops of Light Control    True Color Transmittance & Precise Stops    High-Definition Optical Glass    Increases Saturation    Eliminate Reflections and Glare

Related Questions and Answers

Q: 1. What is the difference between these filters and those made specifically for the 8-16mm lens?

A: The filters in this Kase 3-in-1 Clip-In Filter Set for Fujifilm X-T/X-Pro would fit in front of the image sensor while the filters for the Fujifilm 8-16mm lens would fit directly on the rear element of the lens.

Q: 2. What is the difference between Mavic 3 and Mavic 2 pro?

A: The Mavic 3 Classic features a larger sensor that can film in 4K at 120 fps or 5.1K at 50 fps. It also features a longer flight time than the Mavic 2 Pro.

Q: 3. would this work on the NiSi Cinema 77mm Adapter Ring for C5 Matte Box as a lens Cap/Cover?

A: The NiSi 95mm Swift Push-On Front Lens Cap for True Color VND and SWIFT Filters might be too small, because the 95mm figure is related to the inner dimension, while the push-on cap is related to the outer dimension; therefore, you might need the cap to be 2mm wider. It is always difficult to purchase push-on caps—the only way to make sure it works is to physically test it.

Q: 4. how long can it record in 4K ?

A: The recording duration of the DJI Mavic 3 Classic Drone with DJI RC Remote Controller would depend on the size of the media that you use in the drone. If you are asking about the 8GB of internal memory, then the answer is around five and a half minutes of 4K recording.

Q: 5. So with the gimbal protector attached, will the Mavic 3 Classic be able to fit nicely into the cases's slot?

A: The Mavic 3 Classic with gimbal protector in place will fit into the case included in the DJI Mavic 3 Classic with RC-N1 Remote & Outdoor Accessory Kit.

Q: 6. Is this an upgrade on the DJI Mavic Air 2 ?

A: The DJI Mavic 3 Classic with DJI RC Remote is more a different device to the Mavic Air 2 than a upgrade. The upgrade to the Mavic Air 2 is the Mavic 2S. The difference is the size of the sensor in the cameras. The 2 has a 1/2" sensor; the 2S has a 1/" sensor.

Q: 7. How high can you fly?

A: The DJI Mavic 3 Classic with DJI RC Remote can fly at a maximum altitude of 16,404 feet (5000m) above sea level, however, local laws will limit your drones ability to reach that height, and the typical maximum height limit will bee 400 feet.

Q: 8. Optical or hybrid zoom?

A: The DJI Mavic 3 classic will provide 3x digital zoom.

Q: 9. Is this 10-bit 4.2.0, or 4.2.2.?

A: The DJI Mavic 3 Classic Drone with DJI RC Remote Controller is 10-bit 4:2:0; the Mavic 3 Cine and Mavic 3 Pro can shoot 10-bit 4:2:2.

Q: 10. Kase ND64 Clip-In ND Filter for Nikon Z 6 / Z 7 / Z6 II / Z7 II is it compitable with nikon z8?

A: The Nikon Z8 Mirrorless Camera is compatible with the Kase 3-in-1 Clip-In Filter Set for Select Nikon Z Mirrorless Cameras (Neutral Night/ND16/MCUV).