This Cable Techniques 5-Pin LEMO Connector is for use on timecode cables compatible with Ambient Lockit products and other similar timecode gear. It is also compatible with LEMO-brand 0B Series 5-pin female sockets.

Easy to assemble and repair with no crimp tool needed, the connector accepts cables with a maximum diameter of 3.2mm. It uses a screw-down collet strain and a green silicone boot.

Compatible with Ambient Lockit    Works with LEMO 0B Series 5-Pin Sockets    5-Pin LEMO with Gold Contacts    3.2mm Strain Collet    Green Silicone Boot    Nickel Shell

• LEMO 5-pin (push-pull locking)
• Nickel shell
• Gold contacts
• 3.2mm collet
• Keying: 1 key green silicone boot

Related Questions and Answers

Q: 1. Would you recommend this size for a Nikon 300mm f/4 PF with hood attached?

A: Measure the length and width of the lens & hood and then check the specs on the bag.

Q: 2. Does anyone know if this the adapter needed to jam timecode with firmware 3.0 on the A7SIII?

A: The Sony VMC-BNCM1 Timecode Adapter Cable with the latest firmware will work on the Sony a7s III to jam the timecode.

Q: 3. Is the Wide Body (Medium) Snoot Boot the best size for a Canon 16-35mm f4L lens? Thanks.

A: I have the 16-35 mm f2.8L lens. This pouch fits it with the hood attached (perfect length). Keep in mind that the hood is very wide compared to adapter end of the lens. Don't expect a snug fit along the body of the lens. Once you pull the cord close, the lens stays in the pouch well. I believe the length of your lens and mine are the same. The filter on your is 77 mm vs 82 mm for mine. So I think your hood is close to mine. I think this pouch would fit your lens.

Q: 4. Can I use this to send tc from a Sound Devices Mixpr6 II to a Denecke JB1 syncbox (and then use the sync box to feed camera)?

A: No, the Remote Audio BNC to 1/8" (3.5mm) Timecode Cable would not work with the 3.5mm output connection on the Sound Devices MixPre-6 II Field Recorder. This cable uses a TRRS (3-ring) 3.5mm connection for compatibility with smart phones and similar device connections. The CAMVATE Right-Angle BNC to Right-Angle 3.5mm Mini Jack Timecode Cable (BH #CAC2385) is a suitable alternative for the described application: https://bhpho.to/3RYR5NA

Q: 5. What size Snoot Boot would you recommend for the Nikon AF Zoom-NIKKOR 80-200mm f/2.8D ED Lens with the Nikon HB-7 Hood attached in reverse?

A: I bought the Snoot Boot Wide Body XL and it fits my Nikon 70-/200mm f2.8E(new version) perfectly. I think it would fit the older version also as the only size difference is the older version is an inch longer.

Q: 6. What cable is needed to connect this to both the FX9 and FX3?

A: A male-to-male BNC cable like the Pearstone 3' SDI Video Cable (BNC to BNC). See the link below: https://bhpho.to/2rqJug6

Q: 7. AF Nikkor 80-200mm 1:2.8D Do I need a op/tech snoot boot large or extra-large? Wide body?

A: You can use the large size Snoot Boot for the Nikon 80-200mm f/2.8 lens.

Q: 8. Compatible with the FX30?

A: Yes, The Sony VMC-BNCM1 timecode adapter will also support the Sony FX30.

Q: 9. Is the cable it send and receive both way?

A: The Remote Audio CATCIPBNC is not Bi-directional. It is a timecode input cable for iPads and iPhones.

Q: 10. Does this only work with the FX3? I've got an A7iv and with multi-terminal and would LOVE to have this feature.

A: Yes, at the moment, the Sony VMC-BNCM1 Timecode Adapter Cable is only compatible with the Sony FX3 Full-Frame Cinema Camera.