The matte gray Schoeps CMC 1 L is a miniature Colette Series microphone amplifier offering uncompromising high fidelity in a lightweight and ultracompact form factor for studio recording, broadcast, and live stage applications. Presented as an alternative to the renowned Schoeps CMC 6 amplifier, the CMC 1 L is compatible with all existing MK mic capsules and Colette active accessories (all available separately).

It features a balanced mini LEMO output, compliance with 12V or 48V phantom power, and low current consumption. Its Schoeps RFI Shield provides high immunity from RF interference for a clean, low-noise signal. The CMC 1 L supports the high maximum SPLs tolerated by the various MK mic capsules (available separately). A stand adapter and a 16.4' mini LEMO to XLR 3-pin male adapter cable are supplied with the CMC 1 L.

A/B Stereo & Decca Tree in Medium Rooms    CMC 1 L Miniature Microphone Amplifier    MK 2H Omnidirectional Mic Capsule    K 5 LU LEMO to XLR Mic Cable    SGC Miniature Stand Mount with Swivel    B 5 Solid Foam Popscreen    Premium Case    Lighter, Smaller Option to CMC 6 Amp    Operates on 48 or 12V Phantom Power    RFI Shield Protects from RF Interference

Complete alternative to the renowned CMC 6 amplifier

Can be used in place of the CMC 6 with no compromise

Electrical characteristics of the CMC 1 L are equal to, or even better than, those of the CMC 6 (flat frequency response, very low distortion, and constant output impedance across the audio frequency range)

Only 1" long (about a third the size of the CMC 6)

Weighs just 1 ounce (about 53% lighter than the CMC 6)

Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes

Compatible with all accessories of the CCM series

Very high immunity from RF interference with the Schoeps RFI Shield

Optimized RF protection of the CMC 1 L makes it ideal for use with transmitters such as the Audio Limited A 10

Balanced, direct-coupled, Class-A output circuit

Output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

Includes 16.4' miniature LEMO to XLR 3-pin male adapter cable

Includes mic clip for easy attachment to a mic stand

Suspension mounts such as the Rycote INV-5 are available separately

Related Questions and Answers

Q: 1. This is very similar to the H3-VR, does anyone know if this will have upgraded microphones or would it be the same as the H3-VR in terms of sound quality?

A: Sound quality is the same as H3-VR,

Q: 2. Will this suspension fit with Sennheiser 8040, 30 and 40?

A: It might but it comes with all the Schoeps mic's. You cannot buy this without the mic's.

Q: 3. Is this VRH-8 compatible with the extension cable ECM-6? Thank you

A: This capsule is designed for the H8 recorder. This cable is not listed as compatible with the H8.

Q: 4. If I was to build a 4 unit system for panels discussion, how would I identify each mic without it having a display?

A: The Sennheiser EW-D 835-S SET Digital Wireless Handheld Microphone System can be labelled with the Sennheiser EW-D COLOR CODING SET (BH #SEEWDCCS).

Q: 5. Is the zoom VRH-8 ambisonic microphone compatible with the zoom H-6?

A: No, it is not.

Q: 6. Will this work for the DPA 4018c? Seems like it would due to the size of comparable mics.

A: Yes, the Rycote 041110 InVision INV-6 SOFT Shockmount is compatible for use with the DPA Microphones 4018C Compact Supercardioid Microphone,

Q: 7. Which size for at 35mm 1.4 Art Sigma for Canon lens?

A: The Lensbaby OMNI Ring Set (Large) covers lenses from 62mm to 82mm so it will fit the 67mm thread on the Sigma 35mm Art lens.

Q: 8. will be compatible with Zoom ECM-6 ?

A: The Zoom ECM-6 Extension Cable is compatible for use with the H8 Handy Recorder. It should also work to connect the XAH-8 X/Y-AB Microphone Capsule to the H8.

Q: 9. Do these work for dual band? So 2.4g as well?

A: The Hollyland Capsule Antenna Set for Mars M1 (Pair) has a supported frequency range of 5 GHz–6 GHz; they do not show dual-band support for 2.4 GHz. See below for what’s compatible: MARS M1 MARS 4K MARS 400SPRO MARS 300PRO MARS M1 ENHANCED MARS 400S PRO ll

Q: 10. Does the version being shipped have the cutout for the gain control knob?

A: Yes, the Zoom WSH-6 Foam Windscreen for XYH-6 Microphone Capsule does have a cut out for the gain control knob.