The matte gray Schoeps CMC 1 L is a miniature Colette Series microphone amplifier offering uncompromising high fidelity in a lightweight and ultracompact form factor for studio recording, broadcast, and live stage applications. Presented as an alternative to the renowned Schoeps CMC 6 amplifier, the CMC 1 L is compatible with all existing MK mic capsules and Colette active accessories (all available separately).

It features a balanced mini LEMO output, compliance with 12V or 48V phantom power, and low current consumption. Its Schoeps RFI Shield provides high immunity from RF interference for a clean, low-noise signal. The CMC 1 L supports the high maximum SPLs tolerated by the various MK mic capsules (available separately). A stand adapter and a 16.4' mini LEMO to XLR 3-pin male adapter cable are supplied with the CMC 1 L.

All-Purpose Microphone / 2 Mics in One    CMC 1 L Miniature Microphone Amplifier    MK 5 Omni/Cardioid Mic Capsule    K 5 LU LEMO to XLR Mic Cable    SGC Miniature Stand Mount with Swivel    B 5 Solid Foam Popscreen    Premium Case    Lighter, Smaller Option to CMC 6 Amp    Operates on 48 or 12V Phantom Power    RFI Shield Protects from RF Interference

Complete alternative to the renowned CMC 6 amplifier

Can be used in place of the CMC 6 with no compromise

Electrical characteristics of the CMC 1 L are equal to, or even better than, those of the CMC 6 (flat frequency response, very low distortion, and constant output impedance across the audio frequency range)

Only 1" long (about a third the size of the CMC 6)

Weighs just 1 ounce (about 53% lighter than the CMC 6)

Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes

Compatible with all accessories of the CCM series

Very high immunity from RF interference with the Schoeps RFI Shield

Optimized RF protection of the CMC 1 L makes it ideal for use with transmitters such as the Audio Limited A 10

Balanced, direct-coupled, Class-A output circuit

Output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

Includes 16.4' miniature LEMO to XLR 3-pin male adapter cable

Includes mic clip for easy attachment to a mic stand

Suspension mounts such as the Rycote INV-5 are available separately

Related Questions and Answers

Q: 1. Do these work for dual band? So 2.4g as well?

A: The Hollyland Capsule Antenna Set for Mars M1 (Pair) has a supported frequency range of 5 GHz–6 GHz; they do not show dual-band support for 2.4 GHz. See below for what’s compatible: MARS M1 MARS 4K MARS 400SPRO MARS 300PRO MARS M1 ENHANCED MARS 400S PRO ll

Q: 2. Does the version being shipped have the cutout for the gain control knob?

A: Yes, the Zoom WSH-6 Foam Windscreen for XYH-6 Microphone Capsule does have a cut out for the gain control knob.

Q: 3. If I was to build a 4 unit system for panels discussion, how would I identify each mic without it having a display?

A: The Sennheiser EW-D 835-S SET Digital Wireless Handheld Microphone System can be labelled with the Sennheiser EW-D COLOR CODING SET (BH #SEEWDCCS).

Q: 4. What are the main difference between this model and XY Capsule included with the H8 recorder?

A: This module allows you to customize the stereo width, versus a fixed 90 degree or 120 degree pickup of the other capsule.

Q: 5. This is very similar to the H3-VR, does anyone know if this will have upgraded microphones or would it be the same as the H3-VR in terms of sound quality?

A: Sound quality is the same as H3-VR,

Q: 6. how many handheld mics can connect to this system at the same time ?

A: The receiver will only connect with one mic at a time.

Q: 7. will the vrh8 supported for f8 h6 recorders?

A: At this time, the VRH-8 capsule is only compatible with the H8 recorder.

Q: 8. What is the ideal and maximum recommended talking distance from the zoom VRH8 capsule

A: The idea and maximum will vary depending on the environment in which the Zoom VRH-8 Ambisonic Microphone Capsule is being used, as well as the volume level of the person who is talking. The microphone can be placed a few feet away from the person who is speaking and it will pick up clear audio. To determine the ideal and maximum distance for mic placement with your specific application, do some experimenting and listen through headphones so you can where the mic sounds best and provides the highest quality audio.

Q: 9. Will this capsule fit/work with an AKG C460B preamp section?

A: This capsule is only compatible with AKG GN series and LM3 housings.

Q: 10. How to know your lens thread count?

A: On most lenses there is a diameter symbol printed on the lens followed by a number such as Ø77. That would be the filter thread size of the lens. It is often on the inside of a lens cap too. If you cannot find the number, please contact us and we can help determine the size.