Styled in a producer finish, the Genelec 8361A is a point-source monitor for pro-audio applications in nearfield or midfield settings. It features a coaxial design, which houses its midrange driver, treble tweeter, and dual 10.6” woofers in one location, thereby aligning their acoustical axes and ensuring an accurate point of sonic radiation. The monitor can accept both analog and digital AES/EBU signals from separate XLR jacks, using Intelligent Signal Sensing technology (ISS) to detect automatically what kind of audio is being fed into the monitor. This monitor provides a frequency response of 36 Hz to 20 kHz (±1.5 dB), at a maximum SPL of 124 dB at 0.5m, or 118 dB at 1m. 

To coordinate multiple 8361As, you can make use of Genelec’s GLM software to tune your monitor to your room, facilitate and coordinate daisy-chaining monitors, override the ISS function, and more. Routing is accomplished by means of a few Cat5 cables and a GLM adapter, which is available separately. An XLR output jack is also on hand for sending identical copies of incoming AES/EBU signals to other monitors.

DIP switches and a rotary control for level are offered on the rear of the monitor for offline use. Use these switches to tune the monitors to your room without DSP, should you so choose. An Iso-Pod stand is included to facilitate isolation from aurally deleterious surfaces. Other assets, such as the 8361As acoustically concealed woofers, minimum diffraction coaxial construction, and a proprietary waveguide, are further expounded upon in the features section.

Includes 3 x 8361A SAM Studio Monitors    Includes 8 x 8341A SAM Studio Monitor    Includes 2 x 7380A SAM Studio Subwoofer

GLM, a proprietary software available free from Genelec, allows you to coordinate, equalize, and otherwise manage your 8361A to its fullest potential.

The 8361A's audio inputs are designed to integrate easily into all professional environments, supporting balanced, line-level analog and AES/EBU-format digital signals. Analog input is selected when the AES/EBU signal input is not connected. The AES/EBU-format digital audio input is selected automatically when a valid digital audio signal is present. Automatic audio signal input selection can be overridden, however, when the 8361A is controlled by a GLM network, enabling flexible selection of either input. On the output side, an XLR connector passes through an unaltered copy of the incoming AES/EBU signal, enabling daisy-chaining of up to four monitors. The proper digital channel can be selected using DIP switches, or via GLM.

The Minimum Diffraction Coaxial Driver is comprised of a powerful midrange element combined with a tweeter that extends to ultrasonic frequencies. This arrangement minimizes or downright eliminates acoustic diffraction sources typically found in coaxial drivers, engendering a flat frequency response both on the acoustical axis and at all off-axis points of listening. The 8361A may be oriented either horizontally or vertically and is intended for nearfield to midfield listening, where the influences of the room can be minimized as much as possible. Typical distances can vary from approximately three to ten feet, depending on room size and SPL requirements.

The 8361A has an uncharacteristically large Directivity Control Waveguide extending over the whole front face of the enclosure. The midrange driver cone also forms a part of the Directivity Control Waveguide for the tweeter. From behind the waveguide, two woofers radiate audio through two openings in the enclosure front. This design enables Directivity Control of all audio frequencies down to the low bass frequencies.

SAM technology can improve the reliability and accuracy of these monitors, providing several parametric notch and shelving filters that can be tuned automatically in concert with GLM software, thus compensating for colorations generated by room acoustics. This enables SAM monitors to sound neutral and achieve accurate imaging in most acoustical environments.

Related Questions and Answers

Q: 1. is there anyone who can give the total dimensions of the prompter ? Has it a 4/3 or a 16/9 screen ?Does the horizontal bar to mount the camera on the back is easily removable ?Thank you

A: Teleprompters in general will be designed with a monitor that is closer to 4:3 than 16:9, including this item from MagiCue. This also features tool-less assembly and folds flat for transport and storage, because of that it should be easy to adjust the horizontal bar and mount cameras off and on it.

Q: 2. What is the NATIVE resolution of the monitor?

A: At this time, MagiCue doesn't publish the native resolution of the MagiCue Studio 17" Prompter Package with Pro Software.

Q: 3. can i connect another subwoofer to my polk signa max 5? where and can i buy another wireless sub for my polk signa max5

A: The Polk Audio Signa S4 can only use 1 subwoofer.

Q: 4. does it work with V220?

A: Yes, the Samsung HW-Q990D 656W 11.1.4-Channel Dolby Atmos Soundbar System (B&H # SAHWQ990D) can accept 220V input power, but a plug adapter may be required for international use.

Q: 5. What is the peak total wattage?

A: The Polk Audio Signa S4 3.1.2-Channel Dolby Atmos Soundbar System (B&H # POSS4SBWISUB) has a total power consumption of 40W.

Q: 6. Is the interior green or black?

A: Green.

Q: 7. Would this sled assembly fit an older studio pedestal setup? Our college will be getting some studio cameras donated to the on campus TV studio (Ikegami HL 60W digital studio cameras). Will the included riser fit/need to be used?

A: This unit will have standard tripod treadings under it to be attached to a tripod head. This also lists support for ENG sized cameras. It should work as you need it.

Q: 8. Whats the input resolution?

A: Well, Sam, your question actually answered some of my questions. I did purchase the unit, I unpacked it enough to ensure the glass/mirror shipped without breaking, but have yet to set it up. Will be doing so this week. Good luck with yours!

Q: 9. Is there a pocket for cables: power & XLR?

A: The Genelec 8010-424 Soft Carrying Bag for Select Genelec Monitors has a front pocket, which could be used for cables depending on their size.

Q: 10. Does the monitor invert the signal so it's right-reading off the mirror or do you need a separate signal inverter?

A: The MagiCue software allows you to flip the text so that it can be read comfortably by the talent. // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.