The matte gray Schoeps CMC 1 U is a miniature Colette Series microphone amplifier offering uncompromising high fidelity in a lightweight and ultracompact form factor for studio recording, broadcast, and live stage applications. Presented as an alternative to the renowned Schoeps CMC 6 amplifier, the CMC 1 U is compatible with all existing MK mic capsules and Colette active accessories (all available separately).

It features a balanced XLR output, compliance with 12 or 48V phantom power, and low current consumption. Its Schoeps RFI Shield provides high immunity from RF interference for a clean, low-noise signal. The CMC 1 U supports the high maximum SPLs tolerated by the various MK mic capsules (available separately).

M/S and Double M/S Stereo Sound    2 x CMC 1 U Miniature Mic Amplifiers    2 x MK 8 Figure-8 Matched Mic Capsules    2 x SG 20 Stand Mounts with Swivels    2 x B 5 D Solid Foam Popscreens    Premium Case    Lighter, Smaller Option to CMC 6 Amp    XLR Output    Operates on 48 or 12V Phantom Power    RFI Shield Protects from RF Interference

• Complete alternative to the renowned CMC 6 amplifier
• Can be used in place of the CMC 6 with no compromise
• XLR output connector
• Electrical characteristics of the CMC 1 U are equal to, or even better than, those of the CMC 6
• 1.4" long (about a third the size of the CMC 6)
• 1.3 ounces (about 40% lighter than the CMC 6)
• Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes
• Very high immunity from RF interference with the Schoeps RFI Shield
• Includes mic clip for easy attachment to a mic stand
• Suspension mounts such as the Rycote INV-6 are available separately

Related Questions and Answers

Q: 1. is this mic compatible with any dslr? I use canon(60d) and i want a mic in dimensions like ME-1.

A: The Nikon ME-1 Stereo Microphone is compatible with any DSLR that has a 3.5mm stereo mini jack. As the Canon 60D has a 3.5mm Stereo mini jack, the Nikon ME-1 would be compatible with the Canon 60D.

Q: 2. What kind of automatic mixer works with this mic?

A: You can use any of the Shure automatic mixers such as the SCM410 4-Channel Automatic Mixer (B&H# SHSCM410), SCM810 8-Channel Automatic Mixer (B&H# SHSCM810) or SCM820 8-Channel Digital IntelliMix Automatic Mixer (B&H# SHSCM820). All are compatible with the MX395 Microflex Boundary Microphone.

Q: 3. The mount is positioned sideways when attached to the camera hot shoe. How can the mic be rotated so that it faces forward?

A: Hold the microphone head and body firmly while gently twisting the shoe portion into position.

Q: 4. I have one 8020, if I want to get a pair, is it better to buy a pair or buy another one, i guess my question is, does the single version makes any difference with the pair version?

A: In terms of matching capsules, it is more ideal to purchase the Sennheiser MKH 8020 Compact Omnidirectional Condenser Microphone as a set, however purchasing two individual microphones will still provide great results when used as a pair.

Q: 5. Will this work for the DPA 4018c? Seems like it would due to the size of comparable mics.

A: Yes, the Rycote 041110 InVision INV-6 SOFT Shockmount is compatible for use with the DPA Microphones 4018C Compact Supercardioid Microphone,

Q: 6. Will this mic survive water being splashed on it?

A: Shure does not rate the MX395 Microflex Low-Profile Boundary Microphone models for water resistance. This will probably withstand one or two accidents or water spills, but I would not recommend installing it in an environment where that will happen frequently. If the microphone does get wet, it would be best to wipe it dry as soon as possible. Repeated exposure to spills or splashes will damage the microphone. For conference rooms where water spills are more likely, using a hanging mic like this suspended over the table could be less likely to suffer damage from accidents: https://bhpho.to/2xVQp7s

Q: 7. The question isn't why are 2 mics more expensive than 1, it is why is there a $100 premium over buying 2 separately. Is it because they are 'matched'?

A: The difference in cost between purchasing two Rode NT55 Compact Condenser Microphones with Interchangeable Capsules as opposed to the Matched Pair item can indeed be credited to the fact that the pair is matched, making them more ideal for recording as a stereo pair.

Q: 8. How do I connect a single or pair of these mics to a Sony A7VR or Sony equivalent camera?

A: The Sennheiser MKH 8020 Compact Omnidirectional Condenser Microphone require an XLR to XLR cable and 48V phantom power to function. The Sony a7R V Mirrorless Camera has a 3.5mm mic input as well as the Multi Interface Shoe. In order to connect and power either one or two of the MKH 8020 mics to the camera you will need to use a separate active XLR adapter/mixer or an external recorder. One of the best options is the Sony XLR-K3M Dual-Channel Digital XLR Audio Adapter Kit with Shotgun Microphone which connects to the camera using a cable-free digital connection through the Multi-Interface Shoe. Another option is the TASCAM CA-XLR2d-AN XLR Microphone Adapter Kit for Cameras (B&H # TACAXLR2DAN) which will connect through the camera's 3.5mm mic input. The Comica Audio CVM-AX3 Dual-Channel Audio Mixer for DSLRs (B&H # COCVMAX3) is a budget-friendly alternative that will also connect through the camera's 3.5mm mic input. The three adapters mentioned all have two channels with phantom power which will allow you to connect both mics at the same time.

Q: 9. Why is the matched pairs expensive than the single Nt55?

A: The matched pair comes with 2 microphones. The single NT55 comes with 1 microphone.

Q: 10. Will this suspension fit with Sennheiser 8040, 30 and 40?

A: It might but it comes with all the Schoeps mic's. You cannot buy this without the mic's.