Connect a monitor or wireless transmission system to your camera with this black Canare AR2 12G-SDI Straight to Right-Angle Video Cable from DigitalFoto Solution Limited. The 4.9' long cable features a right-angle BNC connector at one end and a straight BNC connector at the other end, both capable of handling video signals up to 12G-SDI.

1 x 12G-SDI Right-Angle BNC Connector    1 x 12G-SDI Straight BNC Connector    Cable Length: 4.9'

Related Questions and Answers

Q: 1. Will this power the Atmos Ninja V?

A: Yes, the DigitalFoto Solution Limited Coiled D-Tap to Locking DC Barrel Power Cable for Atomos Monitors (1.6 to 4.9') would work with the Atomos battery eliminator and power the Atomos Ninja V. Another good choice from Kondor is listed below. Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 32") BH #KODCTAP21LCK

Q: 2. The battery indicator in camera's LCD screen works with this dummy battery?

A: This decoded dummy battery will be able to communicate power information to compatible Sony cameras and their displays.

Q: 3. Can I power a BM Video Assist 7" 12G using a USB-C PD port on a V-Mount battery, connected to the BM +12V power connector?

A: The connector on the DigitalFoto Solution Limited Coiled USB-C to Locking DC Barrel Power Cables should be 2.5mm which would support the Black Magic video Assist. And a USB-C PD output should be able to provide proper power to the video assist. We would normally recommend using a D-TAP cable. Kondor Blue Coiled D-Tap to Locking DC 2.5mm Right-Angle Cable (16 to 50") BH #KODCTAP25LCK

Q: 4. Is the cold shoe base secured to the head with a 5/8"-27 thread found on mic stands?

A: Not that we are aware of. This has a cold shoe at the bottom and a 1/4"-20 stud to attach accessories to it at the top.

Q: 5. Will this cable work on a Hollyland pyro 7?

A: The DigitalFoto Solution Limited Coiled USB-C to Locking DC Barrel Power Cable (1.6 to 4.9') would not be compatible with the Hollyland Pyro 7 Wireless Transceiver Monitor. To power the Pyro 7 via USB-C, a dummy battery such as the ZILR USB-C to Sony NP-F550 Dummy Battery Cable, BH #ZIZRUCDB05, would be suitable. Be sure that your USB-C source can provide at least 22W of power.

Q: 6. Will this damage the sdi port if left in when the camera is turned on/off?

A: Although the DigitalFoto Solution Limited KO-10 SDI Protector & Galvanic Isolator for RED KOMODO (7.9", Black) provides additional protection during use, it is still advised to disconnect the SDI cable when powering on or off the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF) since there may be an unshielded power cable used.

Q: 7. What will the negotiated DC Voltage be via the USB PD power?

A: The DigitalFoto Solution Limited Coiled USB-C to DC Barrel Power Cable (1.6 to 4.9') (B&H# DIZZ11) will provide 5V if connected to USB power, whether that is to USB PD, or to other high power options, or to regular 5V USB. As of this time (February, 2023), there are no barrel ports known to us that negotiate nor handshake for higher power delivery levels.

Q: 8. As long as nothing is plugged in to the end of this cable, can it be left plugged in the camera during powering on or off?

A: It is always best to follow the proper procedure with the SDI terminals on your cinema camera when powering the camera on and off, regardless of any accessories that protect the port. However, you should be protected by the DigitalFoto Solution Limited KO-10 in the event where a mistake is made during the process of shutting down the camera.

Q: 9. Which USB PD voltage does it support?

A: DigitalFoto Solution Limited Coiled USB-C to Locking DC Barrel Power Cable (1.6 to 4.9') is suitable for all USB-C PD uses.

Q: 10. Will this work for data transfer between a MacBook Pro and Samsung T5 portable SSD?

A: The DigitalFoto Solution Limited USB Type-C Seamless Charging Cable for Zhiyun-Tech Smooth 4 has a very specific function so it isn't recommended for use outside of its gimbal to phone application.