The 50' Tera Grand 8K HDMI 2.1 Copper Fiber Optic Hybrid Cable is guaranteed by Tera Grand to transmit up to 8K at 60Hz with no signal loss or compression. Connecting any device with an HDMI port, this cable supports the full range of uncompressed HDMI 2.1 specifications and, of course, is backward compatible with HDMI 2.0 and HDMI 1.4. Please note, this cable must be installed going the right direction; one side is labeled Source, and the other is labeled Display to ensure proper installation.

Supports 8K HDMI 2.1    48 Gb/s Ultra HD    Copper and Fiber Optic Hybrid    Unidirectional Design for Long Distance

HDMI 2.1 (up to 48 Gb/s bandwidth) for 8K at 60 Hz or 4K at 120 Hz

eARC

HDCP 2.2 and 2.3

Chroma 4:4:4

VRR, QFT, ALLM, and QMS

Includes a housing protector for in-wall installation

Related Questions and Answers

Q: 1. Where can I find one that is just a few inches longer than 19"?

A: The following models are longer Dtap to 2.1mm barrel cables. B&H # FOCC8DCDTAP B&H # NEDECDC21PTP

Q: 2. New to all of this photo/video stuff as I'm getting into vlogging. Will this work with a Canon Rebel T7?

A: Thanks for your question and welcome. With an HDMI type A to type C cable (which is included with this monitor), you would be able to display video from your Canon Rebel T7.

Q: 3. Does this cable work with the Teradek Spark 4k Receiver and or transmitter?

A: Yes, This cable would work with the Spark 4k. Here is more info from Teradek -The DC barrel jack connector is the same as used on the Vidiu, Vidiu Pro and other Teradek and Paralinx devices. It has an outer diameter (OD) of 5.5 mm, an inner diameter (ID) of 2.1 mm, and a barrel length of 9.5 mm. The polarity is center/tip positive, the outer ring is GND.

Q: 4. Is there a foot that will work with this monopod?

A: This has a 3/8"-16 connection on the bottom. Any foot using that connection will fit. For example the feet in the set linked here would work. https://bhpho.to/3wLDVtn

Q: 5. If my camera is set to 4k, will this monitor still show the feed, only in 1080? Or will it not show the feed at all?

A: If the HDMI output is set to 4K, it will not show anything, as this monitor will not support 4K streams, but if you can set the HDMI out to 1080, then a 480 image will be shown -- which is the max resolution that the monitor can reproduce.

Q: 6. What is the outer diameter of the barrel connector? in mm please.

A: The Shape Coiled D-Tap to DC Barrel Cable size is 5.5 x 2.1 mm.

Q: 7. this is listed as an accessory to SmallHD Indie 7 monitor. Can you confirm this connector fits the barrel input on that monitor?

A: Yes, the SHAPE D-Tap to 2.1mm Barrel Power Cable is compatible with the SmallHD INDIE 7 Touchscreen On-Camera Monitor.

Q: 8. Does this work with Intel x520-da based cards?

A: Yes, these are standard SFP+ cables.

Q: 9. Will this work with the Teradek Ace receiver unit?

A: Yes, this cable will work with the Teradek Ace.

Q: 10. Does this connect to Atomos Shinobi 7” ?

A: Yes, the SHAPE D-Tap to 2.1mm Barrel Power Cable would allow you to power the Atomos Shinobi 7 display. The Shape cable would connect to the Atomos Battery Eliminator which is included with the Shinobi 7"