Adam Audio T5V Studio Monitors

Adam Professional Audio T5v T-series Active Nearfield Monitors With 130w Subwoofer Studio Kit

Product Code: ga125682
Availability: In Stock

$2,399.91 $3,311.88

Qty

0 reviews Write a review

Description
Reviews (0)

The single, Adam Professional Audio T-Series T5V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 5" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 45 Hz to 25 kHz and a maximum SPL of 106 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T5V ships with a power cord.

HPS Waveguide from the S-Series Bi-Amped Class-D Amplifier High- and Low-Shelf Filters Maximum SPL: 106 dB U-ART 1.9" Accelerated Ribbon Tweeter 5" Paper Woofer Down-Firing Bass Port Phase Switch Level and Crossover Controls XLR and RCA Inputs and Outputs

Key Specs
Monitor Type & Configuration	Active 2-Way
Total Power Output	70 W
Tweeter	1x 4" / 102 mm Air Motion Transformer
Woofer	1x 5" / 12.7 cm Polypropylene Cone
Frequency Range	45 Hz to 25 kHz
Audio I/O	1x XLR 3-Pin Balanced Line Input 1x RCA Unbalanced Line Input
Digital Audio I/O	No
Network I/O	No
Wireless	No
Parameters
Number of Included Monitors	Single Monitor
Enclosure	Bass-Reflex/Ported, Shielded
Total Power Output	70 W
Tweeter	1x 4" / 102 mm Air Motion Transformer
Woofer	1x 5" / 12.7 cm Polypropylene Cone
Amplifiers	LF: 50 W Class-D HF: 20 W Class-D
Performance
Frequency Range	45 Hz to 25 kHz
Maximum Sound Pressure Level (SPL)	106 dB (Peak)
Total Harmonic Distortion (THD)	0.5%
Signal Processing
EQ	1x HF Shelf 1x LF Shelf
Crossover Frequency	3 kHz
Connectivity
Audio I/O	1x XLR 3-Pin Balanced Line Input 1x RCA Unbalanced Line Input
Digital Audio I/O	No
Network I/O	No
USB	No
Wireless	No
Mobile App Compatible	No
Power
AC Input Power	100 to 240 VAC, 50/60 Hz
Power Consumption	132 W
Physical
Color	Black
Monitor Orientation	Vertical
Mounting Points	No
Dimensions (W x H x D)	7 x 11.7 x 11.7" / 17.8 x 29.7 x 29.7 cm
Weight	12.6 lb / 5.7 kg
Packaging Info
Package Weight	15.7 lb
Box Dimensions (LxWxH)	15.4 x 14.7 x 9.9"

U-ART 1.9" Accelerated Ribbon Tweeter

Allows longer operation with fewer signs of fatigue
Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

Direct, fast response in the high-range even with complex transients

HPS waveguide from the S Series

Makes dispersion more consistent and imaging more stable over a wider area
Reduction of early reflections on the surfaces of mixing consoles, desks, and more

Lightweight polypropylene construction of the woofer

Excellent transient response even at high sound levels without breakup of the diaphragm

Vertical 2-way system with 5" woofer

High resolution of the stereo image

Rear-firing bass reflex port

Bass reproduction with very low compression

Linear frequency response of 45 Hz to 25 kHz

Unbiased reproduction in a wide frequency band

Maximum peak sound pressure per pair in 3.3' (1 m) 106 dB

Powerful, compression-free sound reproduction even at very high sound levels

DSP-powered crossover design

Smooth frequency response without interference between the drivers in the critical midrange

Simple room acoustic adjustments via high- and low-shelf filters

Allows optimal adaptation to acoustically difficult listening environments or individual preferences

Analog inputs over XLR and RCA

Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry

Reduction of unwanted reflections on the cabinets

Related Questions and Answers

Q: 1. Does this work with the old 702 monitor, not the 702 touch?

A: No, the SmallHD Sun Hood for Smart 7 Series Monitors is not compatible with the older SmallHD monitors like the SmallHD 702 Lite 7" SDI and HDMI On-Camera Monitor and the SmallHD 702 OLED 7" On-Camera Monitor.

Q: 2. Does this shade fold flat?

A: Yes, the ViewSonic Professional Monitor Hood for 27" Monitors can fold for storage.

Q: 3. Could I use this on the HP M27fq monitor?

A: The ViewSonic MH27M1 is only rated compatible with ViewSonic screens.

Q: 4. Does it come in different colors?

A: This product is not offered in different colors.

Q: 5. What is the frequency response?

A: As per Audio Technica, the specs for the ATH-E70 are as follows: Frequency Response: 20Hz 19kHz, Sensitivity: 109 dB/mW, Impedance: 39 ohms.

Q: 6. What material is it made of?

A: The Viewsonic MH27M1 hood is made of plastic.

Q: 7. is this compatible with the 27" iMac (late 2019) ?

A: No, this ViewSonic Professional Monitor Hood is not compatible with the 27" iMac (late 2019).

Q: 8. does this v mount plate work with the 703 ultrabright?

A: No, This would be the best choice for your ShallHD 703 Ultrabright display. https://bhpho.to/3IJ4ANt

Q: 9. Will this work on a 27" iMac

A: The ViewSonic Professional Monitor Hood for 27" Monitors is compatible with select ViewSonic monitors.

Q: 10. Would this be suitable for non-Eizo 27" monitors too?

A: This Viewsonic Monitor Hood for 27" Monitors is listed by Viewsonic for compatibility with only six of their displays: VP2771, VP2785-2K, VP2756-2K, VP2785-4K, VP2756-$K, and VP2768a-4K. It might be possible that you could use it on another 27" monitor but Viewsonic does not state universal usage/compatibility.

There are no reviews for this product.