Built for studio recording or live use, the G103-S MKII Headphone Amplifier from LAKE PEOPLE is a 2-channel stereo amp designed to deliver powerful and reliable sound in any environment. This compact, yet durable anodized aluminum device uses numerous internal jumpers to match to your headphone's specific characteristics, with support for a wide range of headphones ranging from eight to 600 ohms load impedance.

The G103-S MKII features internal circuitry designed to provide optimal audio quality including a circuit layout for minimal internal noise and THD, special filters for preventing high or low frequency overload, and a built-in mains transformer that delivers ultralow noise and dependable internal supply voltages of ±25V, greatly reducing the chance of long-term short-circuits. The amp sports two Unbalanced RCA inputs for one stereo pair, and two unbalanced, 1/4" output jacks for two channels of stereo headphone amplification.

Stereo 2-Channel Headphone Amp    Supports 8 to 600 Ohm Headphones    Unbalanced Stereo RCA Inputs    Two Stereo 1/4" Headphone Outputs    Filters for Low/High Frequency Overload    Noise/THD Optimized Circuitry    Built-In Mains Transformer    Durable Aluminum Construction

Related Questions and Answers

Q: 1. Are these good for audio technica m40x headphones?

A: Yes the Audio-Technica ATH-M40x Headphones would work well with the Pyle Pro PHA40 Headphone Amplifier.

Q: 2. What cables do I need and where do I hook My Behringer 800 headphone amp to ?

A: You will need 1/4 cables.The back of the headphone amp is 1/4 TRS cable. This will be put in line to your interface or audio mixer. Most often will be 1/4 TRS on the interface or mixer. Be sure that you won't need 1/4 from headphone amp to XLR on interface or mixer.Think about how far the amp will be from said gear to order,just enough length in your cables.I bought 6 cables since my amp sits on top of interface.Hope this helpsDanny

Q: 3. Will this cable work as a standard TRRS to TRS adapter cable?

A: Not that we are aware of. This is specifically for the Canon 5D MK II when using Magic Lantern.

Q: 4. Any idea how much amplification is added to the signal?

A: AKG lists the nominal output as 680 mW per channel into 32 Ohms.

Q: 5. Does this provide plenty of power to 250 or 600 ohms power without the feeling that I need a higher power amp?

A: The specs on the ART HeadAmp 6 show 150mw with headphones of 8 or 600 ohms. It also states much higher power (500mw) with 32 ohm headphones. One must also consider: 1- the headphone sensitivity specification, which will tell you how loud a headphone is, based on the power applied. 2- the transients in whatever it is you are listening to; large transients requires much more power. see below article of explanation: https://www.audeze.com/blogs/technology-and-innovation/sensitivity-impedance-and-amplifier-power

Q: 6. how many watts per channel?

A: Rated Power: 2ch x 2 Ω: 3,230 W 20ms repetitive burst / 2,530 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 1,985 W 20ms repetitive burst / 1,700 W 1% THD / 1,470 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,175 W 20ms repetitive burst / 1,025 W 1% THD / 880 W 0.15% THD, both channels driven @ 1 kHz RMS Power 1 x 2,900 W at 2 Ω 1 x 1,780 W at 4 Ω 1 x 975 W at 8 Ω 2 x 2,525 W at 2 Ω 2 x 1,510 W at 4 Ω 2 x 890 W at 8 Ω Minimum Load Impedance 2 Ω

Q: 7. Can speakers be one of the outputs from this device?

A: A pair of amplified speakers may be connected.

Q: 8. what dose IPR stand for?

A: Peavey has not specified what "IPR" stands for.

Q: 9. can you use this with a Sony PS4?

A: No. The HP-A3 32-Bit D/A Converter with Headphone Amp from Fostex is a digital to analog audio converter designed for computer audio output. It is capable of handling up to a 24-bit, 96kHz digital audio source.

Q: 10. Can you daisy chain two of these? I have one already and need more outputs.

A: Sure you can.