Whether you are an owner-operator who needs a case for your camera or a rental house looking to protect its investment, this black Studio Case for RED V-RAPTOR with a red insert from Foama has you covered. Nestled inside a Nanuk 950 case, the durable EVA foam is custom-cut to accommodate your camera and specific accessories.

The foam insert for the RED V-RAPTOR is custom-made to fit each piece of equipment perfectly, so you can rest assured knowing it's safe from any damage. While most foam inserts on the market are made from open-cell PE or PU foams that are less protective and not as durable, the Foama insert is designed using the highest quality closed-cell EVA foam, which is much stronger and more long-lasting than any other type on the market.

For Camera & Select Accessories    22.8 x 18.3 x 11.7" Exterior Dimensions    IP67 Rated, Dust Resistant & Waterproof    Extendable Handle & Low-Profile Wheels    Lightweight NK-7 Polypropylene Resin    PowerClaw Latching System    Automatic Pressure-Release Valve    Stackable Design, Handle & Lid Stays    Soft Grip Top & Side Handles

• RED V-RAPTOR LPL and PL mount
• RED CFexpress memory cards
• SMALLHD DSMC3 RED TOUCH 7.0" LCD
• RED CFexpress card reader Type B
• Six Anton Bauer Titon Micro 150 batteries
• Charger Blue Shape energy inside
• 18 and 12" rods

This large 22.8 x 18.3 x 11.7" case is outfitted with robust top and side handles for carrying, or if it is too heavy, extend the telescoping handle and tow it behind you on its two rollerblade-style polyurethane wheels. Built from lightweight but tough impact-resistant NK-7 resin, it has a built-in purge valve to ensure you'll be able to easily open the lid after a flight. The O-ring sealed lid makes the case IP67-rated, waterproof, and resistant to dust.

Nanuk's patented PowerClaw latches clamp the case shut, and slide locks prevent accidental opening if dropped. For security, the case has two steel-reinforced 0.34" diameter holes to accommodate padlocks. Other design features include handle and lid stays and durable stainless steel hardware, and the case is designed to be stackable with other cases. These build and design features make the 950 a safe and dependable way to store and transport your gear.

Related Questions and Answers

Q: 1. Can I mount this on top of the komodo outrigger handle via the screw holes?

A: The Tilta Front Top Plate for RED V-RAPTOR is only listed for the RED V-RAPTOR.

Q: 2. Would the RF to EF mount ND work on this camera?

A: Yes, the Canon EF to RF with ND adapter would work with the RED Komodo. Canon Drop-In Filter Mount Adapter EF-EOS R with Variable ND Filter BH #CAMAEFRFDIND

Q: 3. Is this red approved?

A: The Tilta Advanced Camera Cage Kit for RED V-RAPTOR is RED approved.

Q: 4. What is the dynamic range? Will there be a HDRX mode like DSMC2 used to have? (For 20+ stops)

A: The RED DIGITAL CINEMA V-RAPTOR 8K S35 Sensor Camera is still being tested by RED, but it is expected that the dynamic range on the camera will exceed 15 stops. Once the RED DIGITAL CINEMA V-RAPTOR 8K S35 Sensor Camera starts shipping, we will have a better understanding.

Q: 5. Will this LEMO XLR Adapter work for the Raptor? Remote Audio 2x/3-pin XLR Female to 5-pin to LEMO for Alexa https://www.bhphotovideo.com/c/product/1193268-REG/remote_audio_caxstemlr5_aud_input_cable_f_arriflex.html/qa

A: the camera was recently announced and has not started shipping yet, red hasn't provided a list of approved 3rd party accessories yet, hence we are unfortunately unable to provide any concrete answers at the moment.

Q: 6. What makes this uniquely for the red v raptor and not just another quick release plate on rails?

A: This mount is designed with the V-Raptor in mind. That means the screws and locator pin on the plate line up with the V-Raptor and the plate is designed to ensure that your lens and camera sensor is centered on the rods. Theoretically you could use "another quick release plate on rails" with the V-Raptor if you like this one happens to be designed with that camera in mind.

Q: 7. Do you have to use this with the Tilta V-mount battery plate? Or can you just bolt this on to the V-Raptor and plug it into the camera's EXT port?

A: You could use the Tilta Advanced I/O Module for RED V-RAPTOR without the Tilta V-mount batter plate, but it does make integrating the I/O module easier.

Q: 8. Let me get this straight. This is advertised as an 8k RF-mount camera, but many, if not all, RF- mount lens will vignette. How can this be advertised as an 8k camera?

A: The RED DIGITAL CINEMA V-RAPTOR 8K VV + 6K S35 Dual-Format DSMC3 Camera (Canon RF, Black) (B&H# REVRAPTOR) is advertised as 8K due to the resolution of the sensor and maximum video resolution of 8192 x 4320. True, not all lenses are capable of covering the image sensor, but this camera does offer that option.

Q: 9. Can I use the BMD Video Assist 7 inches 3G on this using SDI outputs?

A: yes you can use the BMD video assist on this as a Video monitor, the SDI outputs will output a standard linear SDI video signal

Q: 10. Do the RF lenses cover the full sensor without vignetting?

A: The RED DIGITAL CINEMA V-Raptor Starter Pack (without Batteries) (B&H# REVRPTRSPNB) has a sensor that is about 14 percent wider than a typical full frame sensor. If one uses a lens that does not cast an image circle to cover the full 40.96mm sensor width, the result is increased vignetting relative to using a sensor with a more standard width of about 35mm. That will vary by lens, of course. The benefit of having such a wide sensor is that it is therefore possible to adapt lenses to fit on the camera that will cast especially wide image circles as do many PL/LPL mount lenses.